I am using these with castrol srf. They work great. Popular with 500e
board. Also available for the w123 I think.
https://www.deerfieldprecision.com/catalog/index.php?cPath=32&osCsid=j2acpu2hv4ami2fa6qsacrc2c6
The teflon lining is probably good to higher temps than the rubber. That is
why the rac
I am not interested in slip on covers. I couldn't care less about
appearance. I care about performance with DOT4 and DOT5 fluids.
I put new hoses on the 1980 123 and they swelled shut within a year. (as
in check valve)
I am looking for a brake hose that will resist all brake fluids,
includ
Slip-on braid is bling. It can't fit tight enough to do what the metal braid
is supposed to do,
as regards braking performance.
You do NOT want metal braid, of any flavor, for general driving. Abrasion from
dirt is the problem.
The regular hoses work perfectly, perhaps for twenty years or so,
> > Curley wrote:
> > Has anyone ever purchased the brake hoses used by custom car
> > builders that are braided SS on the outside? I was wondering
> > if those are available for a 123. If you have used them what
> > was the source, and were you satisfied with the performance?
> Dan wrote:
>
Its supposed to make for tighter brakes because the SS weave can't expand as
much as the rubber hose. The racers swear by it...
-Curt
On Sunday, January 20, 2019, 10:11:09 AM EST, Dan Penoff via Mercedes
wrote:
Why? Isn’t that just swag? I know that some of that material is sold in bu
Those stainless braid over teflon or nylon tubing 'racing brake hoses' aren't
for use by normal people, especially those of us who live on dirt roads.
Get some sandy road grit in the braid and they chew themselves to pieces in a
year or two.
Mitch.
___
http:
Why? Isn’t that just swag? I know that some of that material is sold in bulk
and just slips over the hose or line.
-D
> On Jan 20, 2019, at 10:09 AM, Curley McLain via Mercedes
> wrote:
>
> Has anyone ever purchased the brake hoses used by custom car builders that
> are braided SS on the ou
Has anyone ever purchased the brake hoses used by custom car builders
that are braided SS on the outside? I was wondering if those are
available for a 123. If you have used them what was the source, and
were you satisfied with the performance?
Thanks
___
Howdy --
I am going to replace the rear calipers and hoses on my 91 300D this
weekend hopefully. Question - the connections where the hose meets
the caliper and where the hose meets the chassis pipe - they are
compression fittings IIRC (or they may have a different name - the 2
cones mate an
no
--R
On 7/25/13 2:17 PM, Larry T wrote:
Howdy --
I am going to replace the rear calipers and hoses on my 91 300D this
weekend hopefully. Question - the connections where the hose meets
the caliper and where the hose meets the chassis pipe - they are
compression fittings IIRC (or they may
Howdy --
I am going to replace the rear calipers and hoses on my 91 300D this
weekend hopefully. Question - the connections where the hose meets the
caliper and where the hose meets the chassis pipe - they are compression
fittings IIRC (or they may have a different name - the 2 cones mate and
'83, I don't have the VIN handy, will check when I get home.
-Curt
--- On Tue, 10/21/08, Rusty Cullens <[EMAIL PROTECTED]> wrote:
From: Rusty Cullens <[EMAIL PROTECTED]>
Subject: Re: [MBZ] Brake hoses
To: [EMAIL PROTECTED], "Mercedes Discussion List"
Date: Tue
What year is the car and what is your VIN?
Rusty Cullens
BuyMBparts, Inc.
Tel 1-800-741-5252
Fax 770-454-9745
- Original Message -
From: "Curt Raymond" <[EMAIL PROTECTED]>
To: "Diesel List"
Sent: Monday, October 20, 2008 9:12 PM
Subject: [MBZ] Brake hos
onday, October 20, 2008 9:12 PM
Subject: [MBZ] Brake hoses
Gang,
I noticed the other day my 240D needs front brake hoses (driver's side
anyway, figure I better do both). Rusty lists 2 lengths, 36.5 and 38mm.
I'm figuring to get the 38mm, whats 1.5mm between friends? Plus its nearly
$
Gang,
I noticed the other day my 240D needs front brake hoses (driver's side anyway,
figure I better do both). Rusty lists 2 lengths, 36.5 and 38mm. I'm figuring to
get the 38mm, whats 1.5mm between friends? Plus its nearly $2 cheaper (go
figure).
Without pulling the dammed thing out is there a
15 matches
Mail list logo