Hi there,
I try to get iked working with a windows 10 client but it seems windows
10 isnt going to work with the certificates I created and installed.
so far I did:
- followed the OpenIKED howto to get my openbsd box set up
ikev2 "win" passive ipcomp esp \
from 0.0.0.0/0 to 10.10.10
Just FYI:
I upgraded 6.0 to 6.1 and /etc/installurl was populated with:
https://ftp4.usa.openbsd.org/pub/OpenBSD/6.1
(as is my mirror)
But when running pkg_add -u to upgrade, it searched
http://ftp4.usa.openbsd.org/pub/OpenBSD/6.1/6.1 for packages.
Chopped the 6.1 out of installurl to fix.
Tim
On Tue, Apr 11, 2017 at 11:00:44AM -0400, trondd wrote:
> Just FYI:
>
> I upgraded 6.0 to 6.1 and /etc/installurl was populated with:
> https://ftp4.usa.openbsd.org/pub/OpenBSD/6.1
>
> (as is my mirror)
>
> But when running pkg_add -u to upgrade, it searched
> http://ftp4.usa.openbsd.org/pub/Ope
> -Original Message-
> From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On
> Behalf Of bytevolc...@safe-mail.net
> Sent: April 10, 2017 19:31
>
> > Plus, this year it appears that Peter is co-delivering the seminar
> > with Massimiliano Stucchi from RIPE, so it will presumably c
Hello everyone.
After upgrading to 6.1 about an hour ago, I noticed that I didn't have an
IPv6 connection
anymore.
I use dhcpcd over a pppoe session, which worked fine in 6.0-stable. The
problem seems to
be a failure to add a default inet6 route on the pppoe device. I see this
error in the dmesg
I have done a fresh install of 6.1 (downloaded it today, from
ftp.openbsd.org/pub/OpenBSD/6.1/amd64 as the file install61.fs (I live in
Edmonton, Alberta, that's why I use the source ftp)) and was trying to
install some packages...
When I type in pkg_add -v http://ftp.openbsd.org/%m/joe (as an exa
Ok, lets try this again…
I got the 9280 installed. My configs are like this:
My interfaces are configured like this:
/etc/hostname.re0
dhcp
/ets/hostname.athn0
media autoselect mode 11n media opt host ap chan 1
nwid testytesterson
wpakey testingx
inet 192.168.77.253 255.255.255.0
/et
Sent from my iPhone
> On Apr 11, 2017, at 8:04 PM, Jordon wrote:
>
> Ok, lets try this again…
>
> I got the 9280 installed. My configs are like this:
>
> My interfaces are configured like this:
>
> /etc/hostname.re0
> dhcp
>
> /ets/hostname.athn0
> media autoselect mode 11n media opt host ap
> What is your dhcpd.conf and have you verified it's running?
>
There is none - the OpenBSD machine that I am trying to turn into an access
point is not the DHCP server or router in my network. With bridging enabled,
shouldn’t DHCP requests just be forwarded to the wired network, where the
actual
On 04/11/17 20:13, Jordon wrote:
What is your dhcpd.conf and have you verified it's running?
There is none - the OpenBSD machine that I am trying to turn into an access
point is not the DHCP server or router in my network. With bridging enabled,
shouldn’t DHCP requests just be forwarded to the
I just wanted to thank Ingo for the work with man, etc. The new
man.conf is so much nicer!
Thanks,
edgar
> rcctl enable dhcrelay
> rcctl set dhcrelay flags -i athn0 192.168.1.1 "assuming that is your routers
address"
> rcctl start dhcrelay
>
> and possibly add -d (log to stderr) to see what its doing.
>
Thank you! That got it working! So why is that necessary? Doesnt the bridge
just forward everyt
Sent from my iPhone
On Apr 11, 2017, at 9:55 PM, Jordon wrote:
>>
>> rcctl enable dhcrelay
>> rcctl set dhcrelay flags -i athn0 192.168.1.1 "assuming that is your
routers address"
>> rcctl start dhcrelay
>>
>> and possibly add -d (log to stderr) to see what its doing.
>>
>
> Thank you! That got
Hello,
I am putting together a PCengines machine, and I need some clarification
about support in OpenBSD for the WLE600vx wifi card. This card claims to
support 802.11a/b/g/n/ac and uses the Qualcomm Atheros QCA9882 chipset.
According to PCengines, the card requires the ath10k driver, which I am
> I'm not certain but I suspect you're athn address is outside your routers
> subnet.
>
No, they’re both on 192.168.77.x
Tue, 11 Apr 2017 15:31:57 -0500 "Adam Thompson"
> > > Plus, this year it appears that Peter is co-delivering the seminar
> > > with Massimiliano Stucchi from RIPE, so it will presumably cover
> > > a lot of IPv6 topics as well, which are poorly represented in
> > > existing materials and yet incre
On Tue, Apr 11, 2017 at 04:43:27PM -0600 or thereabouts, Anathae Townsend wrote:
> I have done a fresh install of 6.1 (downloaded it today, from
> ftp.openbsd.org/pub/OpenBSD/6.1/amd64 as the file install61.fs (I live in
> Edmonton, Alberta, that's why I use the source ftp)) and was trying to
> ins
I'm interested in buying an Wacom Intuos Draw which is supported in
6.1. However when I go to reichelt.de the model that's available says
CTL-490DW I don't know if DW is supported, can someone let me know?
https://www.reichelt.de/Grafiktabletts-stifte/WACOM-CTL-490DW/3/index.html?ACTION=3&LA=5&AR
On Fri, 7 Apr 2017 17:44:30 + (UTC)
Stuart Henderson wrote:
> On 2017-04-06,
> wrote:
> > Since pkg.conf(5) is no longer used, how would you set fullwidth,
> > loglevel, nochecksum, ntogo?
> >
> > In particular, I am interested in fullwidth, loglevel, and ntogo.
> >
> >
>
> ntogo is now
On Tue, Apr 11, 2017 at 08:34:34PM -0400, Nathan Van Ymeren wrote:
> Hello,
>
> I am putting together a PCengines machine, and I need some clarification
> about support in OpenBSD for the WLE600vx wifi card. This card claims to
> support 802.11a/b/g/n/ac and uses the Qualcomm Atheros QCA9882 chi
On Wed, Apr 12, 2017 at 01:20:20AM +0200, Sterling Archer wrote:
> Hello everyone.
>
> After upgrading to 6.1 about an hour ago, I noticed that I didn't have an
> IPv6 connection
> anymore.
>
> I use dhcpcd over a pppoe session, which worked fine in 6.0-stable. The
> problem seems to
> be a failu
On Tue, Apr 11, 2017 at 08:04:45PM -0500, Jordon wrote:
>/ets/hostname.athn0
> media autoselect mode 11n media opt host ap chan 1
Is there actual whitespace between 'media' and 'opt' and between
'host' and 'ap' in your config file? Or is this a copy/paste error?
It should look like this:
med
22 matches
Mail list logo
