I have a T1000, and it runs 6.9 in primary and 7 guests.
However, attempts to create and install a new ldom config result
in complete loss of the device tree, and consequent inability to boot.
restore to factory, and then restore the ldom config created with OBSD 6.3
will produce a working system.
Hi all,
I'm trying to give my wireguard peer a global IPv4 and IPv6.
The IPv6 is working fine, but the IPv4 doesn't work.
My VPS host (frantech) has provided me with two IPv4s,
198.98.53.194 (main IP through dhcp) and 198.98.61.217
which I can get on my vio0 interface with the configuration
/e
Hi Moritz,
I upgraded with the following command on my OpenBSD 6.8 release, and
the network is working fine.
$ doas sysupgrade
I am using ESXi 6.7 and VMware Fusion 12.1.1 and em0 both environment,
and network is working fine both environment.
Isn't it a VMware Workstation problem?
Can you try
I have a SunFire T2000 that I originally installed 6.1 on. I set up LDOMs
way back in May 2017. I kept all of the domains up to date until OpenBSD
6.6. After that, LDOMs would no longer work. The system would not boot
unless I reverted back to the single domain default using
bootmode config="factor
Hi,
Networking has become unusable in all of my virtual installs of 6.9 on
VMware Workstation after an (otherwise uneventful) sysupgrade from 6.8
to 6.9. They've been working for years and I've upgraded them several
times without any issues so far.
netstat -ni shows a huge number of Ofail a
>From my limited understanding of cisco ASA configs i can't see any
obvious problems.
You could try setting 'from any to any' on your side to see how the server
responds. If the server is configured to narrow traffic selectors, the handshake
should succeed and the log will tell you the exact traff
On 5/11/2021 3:41 AM, Edgar Pettijohn wrote:
On May 11, 2021 3:42 AM, Robert Klein wrote:
On Sun, 9 May 2021 07:47:32 -0700
Scott Vanderbilt wrote:
> On 5/9/2021 4:04 AM, Stuart Henderson wrote:
> > On 2021-05-08, Scott Vanderbilt wrote:
> >> Apologies if this is a question to
On 5/11/2021 1:42 AM, Robert Klein wrote:
On Sun, 9 May 2021 07:47:32 -0700
Scott Vanderbilt wrote:
On 5/9/2021 4:04 AM, Stuart Henderson wrote:
On 2021-05-08, Scott Vanderbilt wrote:
Apologies if this is a question to which there is an obvious
answer, but I could not find one in the sysupg
>
> Always surprises me when people are willing to run things like that as
> root..
This is a single purpose system so I'm not worried about collateral damage,
although I agree it's best practice to use a limited account for usrland
applications. I had thought it would be experimentally easier t
On 2021-05-11, Paul W. Rankin wrote:
> Hello,
>
> I am trying to install OpenBSD on a Raspberry Pi 4B without the
> assistance of the serial console. The Pi firmware is set to boot from
> USB. I have arm64 miniroot69 on a USB and the system boots; I see the
> "BOOT>" prompt, but my USB keyboard
Hello,
I am trying to install OpenBSD on a Raspberry Pi 4B without the
assistance of the serial console. The Pi firmware is set to boot from
USB. I have arm64 miniroot69 on a USB and the system boots; I see the
"BOOT>" prompt, but my USB keyboard does not appear to be recognised at
this point
Update.
My conf seems to work as expected, but it took a few hours for APs to find the
controller. Since then even new APs find the controlles in a few minutes.
Controller: Alcatel-Lucent OmniVista 2500
APs: OAW-AP1321-RW
Thanks for your help!
On Mon, 10 May 2021 15:30:01 +0200
Radek wrote:
>
Tobias,
The remote side gave me their Cisco ASA 5585 settings and they showed the
logs:
object network Svc_2_2_2_2
host 2.2.2.2
object network Svc_3_3_3_3
host 3.3.3.3
crypto ipsec ikev2 ipsec-proposal ESP-AES256-SHA2
protocol esp encryption aes-256
protocol esp integrity sha-256
object-group ne
On May 11, 2021 3:42 AM, Robert Klein wrote:
On Sun, 9 May 2021 07:47:32 -0700
Scott Vanderbilt wrote:
> On 5/9/2021 4:04 AM, Stuart Henderson wrote:
> > On 2021-05-08, Scott Vanderbilt wrote:
> >> Apologies if this is a question to which there is an obvious
> >> answer, but I cou
On Sun, 9 May 2021 07:47:32 -0700
Scott Vanderbilt wrote:
> On 5/9/2021 4:04 AM, Stuart Henderson wrote:
> > On 2021-05-08, Scott Vanderbilt wrote:
> >> Apologies if this is a question to which there is an obvious
> >> answer, but I could not find one in the sysupgrade man page, in
> >> the FA
Hi, the fan always on, any helps, Thanks
On 5/10/21 7:10 AM, jacky wrote:
OpenBSD 6.9 (GENERIC.MP) #473: Mon Apr 19 10:40:28 MDT 2021
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34244227072 (32657MB)
avail mem = 33191006208 (31653MB)
random: good seed from boo
On 2021-05-10, Roger Marsh wrote:
> After upgrading to OpenBSD 6.9 'ValueError: ZIP does not support timestamps
> before 1980' exceptions started occuring when installing python packages by:
>
> 'python3.8 setup.py install --user' where the package was built by:
>
> 'python3.8 setup.py sdist --fo
On 2021-05-09, Scott Vanderbilt wrote:
> On 5/9/2021 4:04 AM, Stuart Henderson wrote:
>> On 2021-05-08, Scott Vanderbilt wrote:
>>> Apologies if this is a question to which there is an obvious answer, but
>>> I could not find one in the sysupgrade man page, in the FAQ, or by Googling.
>>>
>>> Is
18 matches
Mail list logo
