Hi,
I had a silimar issue on a Lenovo V130.
For this machine I needed to remove the amdgpu driver in the kernel.
See also:
https://marc.info/?l=openbsd-misc=160232897421774=2
https://marc.info/?l=openbsd-tech=160383074317608=2
Do you get the error "entry point at 0x1001000" also with the
You are probably haunted by a bad issue with DMA memory and running out of
it. Your top is missing -SH since then you would probably see the
pagedameon go bananas. The problem is you have not enough memory below 4G
but the pagedaemon is not able to properly free memory there since it has
no
Hello,
I tried to install OpenBSD 7.5 on a new HP Elitebook 840 G10 (UEFI capable
only) without success.
It is stuck at boot on "entry point at 0x1001000".
Even retried after a BIOS upgrade but no luck either.
I tried with a snapshot install too with the same result.
I post here what lspci
On Thu, May 23, 2024 at 08:24:03PM +0300, Kapetanakis Giannis wrote:
> On 23/05/2024 20:18, Peter N. M. Hansteen wrote:
> > On Thu, May 23, 2024 at 11:14:20AM +0200, Why 42? The lists account. wrote:
> > > I need to quickly create a solution for forwarding multicast traffic
> > > between two
On 23/05/2024 20:18, Peter N. M. Hansteen wrote:
On Thu, May 23, 2024 at 11:14:20AM +0200, Why 42? The lists account. wrote:
I need to quickly create a solution for forwarding multicast traffic
between two systems, so I though perhaps I could use pf to do just that
by writing some rules along
On Thu, May 23, 2024 at 11:14:20AM +0200, Why 42? The lists account. wrote:
> I need to quickly create a solution for forwarding multicast traffic
> between two systems, so I though perhaps I could use pf to do just that
> by writing some rules along the lines of:
>
> 1. pass in on iface A
On Thu, May 23, 2024 at 03:37:24PM +, James Cook wrote:
> On Thu, May 23, 2024 at 08:00:37AM GMT, Nick Holland wrote:
> > On 5/23/24 03:18, Stuart Henderson wrote:
> > > On 2024-05-22, James Cook wrote:
> > > > One of my OpenBSD boxes sometimes gets in a weird locked-up or
> > > >
On Thu, May 23, 2024 at 08:00:37AM GMT, Nick Holland wrote:
On 5/23/24 03:18, Stuart Henderson wrote:
On 2024-05-22, James Cook wrote:
One of my OpenBSD boxes sometimes gets in a weird locked-up or
almost-locked-up state. I'm wondering what I can do to debug it
further next time it happens.
On 2024-05-23 22:07:27, Sadeep Madurange wrote:
> I'm trying to assign xterm to group 1 and firefox to group 2. Then,
> I'd like to only see a specific group at any given time.
>
> After logging in, I start xterm. Then I start firefox. Problem is
> firefox opens right on top of my terminal. I
Hello,
I'm trying to assign xterm to group 1 and firefox to group 2. Then, I'd
like to only see a specific group at any given time.
After logging in, I start xterm. Then I start firefox. Problem is
firefox opens right on top of my terminal. I expected it to open in
group 2 such that either it's
On 2024/05/23 12:12, Ali Farzanrad wrote:
> Hi Stuart,
>
> Stuart Henderson wrote:
> > On 2024-05-23, Ali Farzanrad wrote:
> > > Hi misc@,
> > >
> > > My Minisforum UM790 keeps reboot every 5-10 minutes, without any Kernel
> > > Panic or visible message how may I debug it?
> > > I'm using
Hi Stuart,
Stuart Henderson wrote:
> On 2024-05-23, Ali Farzanrad wrote:
> > Hi misc@,
> >
> > My Minisforum UM790 keeps reboot every 5-10 minutes, without any Kernel
> > Panic or visible message how may I debug it?
> > I'm using latest OpenBSD snapshot with this amd64/BUILDINFO:
> > Build
On 5/23/24 03:18, Stuart Henderson wrote:
On 2024-05-22, James Cook wrote:
One of my OpenBSD boxes sometimes gets in a weird locked-up or
almost-locked-up state. I'm wondering what I can do to debug it
further next time it happens.
...
I would also expect the cache number to be much higher.
On 5/22/24 08:08, Kirill A. Korinsky wrote:
On Wed, 22 May 2024 12:53:11 +0100,
Nick Holland wrote:
For reasons of multi-hour fsck's on a few systems, I'm looking at
remounting the problem file systems as "rw" when writing is actually
needed and "ro" after the writing is complete (IN THIS
On 2024-05-23, Ali Farzanrad wrote:
> Hi misc@,
>
> My Minisforum UM790 keeps reboot every 5-10 minutes, without any Kernel
> Panic or visible message how may I debug it?
> I'm using latest OpenBSD snapshot with this amd64/BUILDINFO:
> Build date: 1716424636 - Thu May 23 00:37:16 UTC 2024
Not a
Hi misc@,
My Minisforum UM790 keeps reboot every 5-10 minutes, without any Kernel
Panic or visible message how may I debug it?
I'm using latest OpenBSD snapshot with this amd64/BUILDINFO:
Build date: 1716424636 - Thu May 23 00:37:16 UTC 2024
# (dmesg; sysctl hw.sensors)
OpenBSD 7.5-current
Hi All,
I need to quickly create a solution for forwarding multicast traffic
between two systems, so I though perhaps I could use pf to do just that
by writing some rules along the lines of:
1. pass in on iface A proto UDP ... tag mcast
2. pass out on iface B tagged mcast
And
>From a quick glance it is a bog-standard m.2 / NGFF card, so it should be
>fairly trivial to replace the card with a supported one, see the removal
>steps at 01:30 :
https://www.youtube.com/watch?app=desktop=dqJ9LjY0Jco
Stuart Henderson írta 2024. máj.. 23, Cs-n 09:23 órakor:
> On
On 2024-05-23, Gustavo Rios wrote:
> --1fa3f9061917b744
> Content-Type: text/plain; charset="UTF-8"
>
> Hi folks!
>
> I would like to setup my openbsd wifi but up to now, no success.
> Here is my lspci output. May some one help me ?
>
> Thanks a lot.
>
> 02:00.0 Network controller:
On 2024-05-22, James Cook wrote:
> One of my OpenBSD boxes sometimes gets in a weird locked-up or
> almost-locked-up state. I'm wondering what I can do to debug it
> further next time it happens.
...
> I would also expect the cache number to be much higher. E.g. on
> this occasion, I was running
On Thu, May 23, 2024 at 03:56:01AM -0300, Gustavo Rios wrote:
> Here you have them:
...
"Realtek 8821CE" rev 0x00 at pci2 dev 0 function 0 not configured
That means there is no driver available in OpenBSD for that card.
-Otto
Here you have them:
Em qui., 23 de mai. de 2024 às 02:59, Otto Moerbeek
escreveu:
> On Thu, May 23, 2024 at 01:44:57AM -0300, Gustavo Rios wrote:
>
> > Hi folks!
> >
> > I would like to setup my openbsd wifi but up to now, no success.
> > Here is my lspci output. May some one help me ?
> >
>
22 matches
Mail list logo