Hello,
For those who are interested, the most recent snapshots contain support
for the Intel X553 copper NICs used on the Supermicro A2SDi-4C-HLN4F
boards.
I have tested this on a couple of systems and I am seeing about 940 Mbps
with tcpbench(1) using a direct cable connection.
I am guessing
On Sat, 15 Jun 2019 19:36:23 +1000
Jonathan Gray wrote:
> On Sat, Jun 15, 2019 at 09:02:11AM +0100, Richard Laysell wrote:
> >
> > Hello,
> >
> > I was trying OpenBSD on a Supermicro A2SDi-4C-HLN4F which uses an
> > Intel Atom CPU (Denverton).
Hello,
I was trying OpenBSD on a Supermicro A2SDi-4C-HLN4F which uses an Intel
Atom CPU (Denverton). The board boots but most devices are not
detected because ACPI can't be enabled.
Does anyone know if this is likely to be supported at some point?
Full dmesg is below
OpenBSD 6.5
On Thu, 12 Jul 2018 16:37:27 +0100
Richard Laysell wrote:
The solution in the end was to use a spare USB wireless dongle that I
had lying around. This was detected as a run(4) device.
Everything now works perfectly
Thanks to all who responded.
Regards,
Richard
Hello,
I'm having a problem getting the wireless network to work on a ThinkPad
T40. The wireless seems to connect OK, but I can't get any packets
through it.
The device is ipw0 and it seems to be configured correctly as far as I
can see.
# cat /etc/hostname.ipw0
nwid anderella24
wpakey
On Fri, 11 Sep 2015 18:38:23 -0400 (EDT)
"dewey.hyl...@gmail.com" wrote:
> hi all. i’m having difficulty with this board:
>
> Supermicro X7SPE-HD-D525 rev1
>
> i have several similar systems, each running an older version of
> OpenBSD for a few years without incident.
Hello,
I'm trying to do an autoinstallation of OpenBSD 5.7. The system PXE
boots OK and most of the installation works as expected, but the
install system is unable to find the installation sets and stops
I'm using the bsd.rd from snapshots as this supports the auto
partitioning (which works
On Thu, 11 Jun 2015 12:19:39 +0100
Raf Czlonka rczlo...@gmail.com wrote:
On Thu, Jun 11, 2015 at 11:58:40AM BST, Richard Laysell wrote:
Hi Richard,
Can anyone see where I'm going wrong?
Not immediately obvious, but you're missing the 'index.txt' file[0]:
Note: if you wish
Hello,
My copy of 5.7 arrived yesterday, but I seem to have problems booting
from the second CD (trying to boot an amd64 system)
The system will not boot at all - it reports that it can't see a
bootable disk. I can boot the same system from the first CD (i386)
and this all works OK
If I take a
9 matches
Mail list logo