cookie: 64755be010cd32d2-> msgid: len: 510
18:45:41.927874 A.B.C.77.500 > 1.2.3.119.500: isakmp v2.0 exchange IKE_SA_INIT
cookie: 64755be010cd32d2->2a0fe33c6b9afff8 msgid: len: 471
Thanks!
On Mon, 5 Nov 2018 09:27:25 +0100
Kim Zeitler wrote
5535
ikev2_pld_ts: start 172.16.0.0 end 172.16.0.255
ikev2_msg_send: IKE_AUTH request from 1.2.3.119:500 to A.B.C.77:500 msgid 1,
1600 bytes
ikev2_init_ike_sa: "home" is already active
$ ipsecctl -sa
FLOWS:
flow esp out from ::/0 to ::/0 type deny
SAD:
I really do not know what I am doi
: free 0x7fcc4080
config_free_proposals: free 0x7fcc4580
config_free_proposals: free 0x825a0a00
Then I get 809 Error.
On Wed, 7 Feb 2018 22:01:16 +0100
Radek wrote:
> Hi again,
>
> I'm still trying to make it work for roadwarriors.
> VPN server has IP address A.B.9.73/23. It is OpenBSD6.
; > /jl
>
> Hello,
>
> I would recommend samba. You can also try using NFS, I've heard that
> windows can mount NFS shares.
>
> About the security thing, I don't know if the protocol used by samba is
> secure between clients, but you can still run a VPN between your openbsd
> box and the Windows client to allow connecting to the samba share
> securely.
>
> regards
>
--
radek
l/aliases
listen on lo0
accept for local alias #deliver to mbox
accept from local for any relay as user+al...@gmail.com
Thanks for help!
--
radek
posals: free 0x8134e000
Generating and installing certificate for E.F.G.H doesn't make any change.
On Sat, 27 Jan 2018 19:55:46 +0100
Radek <alee...@gmail.com> wrote:
> Hello,
>
> I have configured OpenIKED Site-to-Site VPN between two gateways:
> serv73 - OBSD6
up trust
[root@@serv75/home/rdk:]cat /etc/hostname.enc0
up
[root@@serv75/home/rdk:]cat /etc/rc.conf.local
iked_flags=YES
ntpd_flags="-s"
dhcpd_flags="vr1 vr2 vr3"
[root@@serv75/home/rdk:]cat /etc/sysctl.conf
net.inet.ip.forwarding=1
net.inet.ipcomp.enable=1
net.inet.esp.enable=1
--
radek
/6.domain) started to show
the content of 1.domain.com
If I changed the order of "forward" websites (https://1.domain,
https://2.domain, https://3.domain) started to show content of 4.domain.com
relay relay_tls {
listen on 127.0.0.1 port 8443 tls
protocol "
default ><
doing _rc_read_runfile
doing rc_check
relayd
doing rc_pre
configuration OK
doing rc_start
doing _rc_wait start
doing rc_check
doing _rc_write_runfile
(ok)
On Fri, 30 Sep 2016 07:26:22 -0400
Josh Grosse <j...@jggimi.homeip.net> wrote:
> On Fri, Sep 30, 2016 at
0.8.22):
4.domain.com
5.domain.com
6.domain.com
How can I make it work?
Any help appreciated.
--
radek
6 17:10:45 +0300
"Kirill Bychkov" <ki...@linklevel.net> wrote:
> On Thu, July 14, 2016 15:56, Radek wrote:
> > Hi,
> > I can not set up apcupsd to work with USB. Any help appreciated.
> >
> [...]
> >
> > #dmesg
> [...]
> > uhidev0 at u
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhidev0 at uhub2 port 1 configuration 1 interface 0 "American Power Conversion
Smart-UPS 2200 FW:UPS 09.3 / ID=18" rev 2.00/1.06 addr 2
uhidev0: iclass 3/0, 146 report ids
upd0 at uhidev0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (e8a3ba715d004629.a) swap on wd0b dump on wd0b
upd0 detached
uhidev0 detached
uhidev0 at uhub1 port 2 configuration 1 interface 0 "American Power Conversion
Smart-UPS 2200 FW:UPS 09.3 / ID=18" rev 2.00/1.06 addr 2
uhidev0: iclass 3/0, 146 report ids
upd0 at uhidev0
--
radek
VLAN-PRAC"
All vlan* interfaces have trunk0's MAC now (all the same). Hope it is not a
problem.
On Tue, 19 Apr 2016 15:27:21 +0200
Radek <alee...@gmail.com> wrote:
> Thanks for all your replies.
>
> > I think dhcpd.interfaces is a relic? For the longest time I've simply
&g
AC97" rev 0x02: apic 1 int
> 17, ICH5 AC97
> ac97: codec id 0x434d4983 (C-Media Electronics CMI9761A+)
> audio0 at auich0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub
t 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (e8a3ba715d004629.a) swap on wd0b dump on wd0b
--
radek
need to set that up.
Also, the bootloader may not understand the 16750.
-ml
On Mon, Feb 16, 2015 at 10:50:35AM +0100, Radek wrote:
I'm trying to setup a serial console. My RS-232 is an old PCIcard.
I tried this way:
boot set tty com4
/etc/ttys:
tty00 /usr/libexec/getty
0x003c: Interrupt Pin: 01 Line: 0c Min Gnt: 00 Max Lat: 00
--
radek
http://ftp.openbsd.org/pub/OpenBSD/patches/5.5/common/007_sendmail.patch.sig
And then rebuild and install sendmail:
- cd gnu/usr.sbin/sendmail
+ cd /usr/src/gnu/usr.sbin/sendmail
make obj
make depend
make
--
ax
for help,
Radek
in my TODO list.
Thanks!
On Tue, 13 Aug 2013 07:33:20 -0500
Vijay Sankar vsan...@foretell.ca wrote:
Quoting Radek alee...@gmail.com:
Hi @misc,
I can't find any way/option to log npppd sessions on a VPN gateway.
What I need to log:
- username
- user's source_IP
- user's
Hello,
I have cbq based altq in pf.conf and I neet to find out which
traffic goes over default queue. Is it possible?
queue dflt_rl0 bandwidth 128Kb cbq(default)
--
Regards,
Bc. Radek Krejca
[EMAIL PROTECTED]
http://www.ceskedomeny.cz
http://www.skdomeny.com
http
.o(.text+0x81): In function `main':
: undefined reference to `ioperm'
collect2: ld returned 1 exit status
--
Regards,
Bc. Radek Krejca
[EMAIL PROTECTED]
http://www.ceskedomeny.cz
http://www.skdomeny.com
http://www.starnet.cz
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
Regards,
Bc. Radek Krejca
[EMAIL PROTECTED]
http://www.ceskedomeny.cz
http://www.skdomeny.com
http://www.starnet.cz
Hi,
thank you for response. It was my idea too but pfctl -ss shows about
1 lines. Where I got better information about ports over nat?
Thank you
Radek
1. srpna 2005, 23:02:15, jste napsal(a):
SKQ On Mon, 2005-08-01 at 21:21 +0200, Bc. Radek Krejca wrote:
I have problem
101 - 124 of 124 matches
Mail list logo