On 11/10/14, 2:46 PM, Peter Hessler wrote:
As I said before.
_This_ _Is_ _Not_ _Possible_.
Period.
Wellif you're doing bridging on the Linux setup you're trying to
replace, but don't realize it, forget to mention that the Cisco actually
*does* have an address in the /29 the Free/OpenBSD
Hi
This is a part of the output containing the static routes related to
*bnx0* , *bnx1 *, i was trying to make a static route for the
189.92.72.11 pointing to *bnx1* but without success, is it possible ?
below the routes is the output of ifconfig these interfaces, i'm gonna
try a bridge
As I said before.
_This_ _Is_ _Not_ _Possible_.
Period.
On 2014 Nov 10 (Mon) at 17:30:50 -0200 (-0200), Dante F. B. Col? wrote:
:Hi
:
:This is a part of the output containing the static routes related to
:*bnx0* , *bnx1 *, i was trying to make a static route for the
:189.92.72.11 pointing to
On Thu, Nov 06, 2014 at 07:12:20PM -0200, Dante F. B. Col?? wrote:
I'm trying to setup some static routes on a openbsd 4.9 box for some
public addresses
This usually gets mentioned, so I'll go ahead and bring this to your
attention.
OpenBSD 4.9 is long unsupported. There have been many
That is not supported. You MUST NOT have IPs in the same range on
different interfaces.
You can assign some /32s (or /128 if you are using IPv6) to a lo1 on the
system, but that may not be what you want.
On 2014 Nov 06 (Thu) at 19:12:20 -0200 (-0200), Dante F. B. Col?? wrote:
:Hello everyone
On 2014-11-07, li...@ggp2.com li...@ggp2.com wrote:
On Thu, Nov 06, 2014 at 07:12:20PM -0200, Dante F. B. Col?? wrote:
I'm trying to setup some static routes on a openbsd 4.9 box for some
public addresses
This usually gets mentioned, so I'll go ahead and bring this to your
attention.
Yes,
On 2014-11-07, li...@ggp2.com li...@ggp2.com wrote:
On Thu, Nov 06, 2014 at 07:12:20PM -0200, Dante F. B. Col?? wrote:
I'm trying to setup some static routes on a openbsd 4.9 box for some
public addresses
This usually gets mentioned, so I'll go ahead and bring this to your
attention.
Yes,
Hello everyone
I'm trying to setup some static routes on a openbsd 4.9 box for some
public addresses , the machine has two ethernet cards *bnx0 ***and *bnx1
***, *bnx0* is attached to a Cisco internet router and *bnx1*** is
connected to a switch, both interfaces have public addresses of the
On Thu, Nov 06, 2014 at 04:12:20PM EST, Dante F. B. Colò wrote:
Hello everyone
Hi Dante,
I'm trying to setup some static routes on a openbsd 4.9 box for some
public addresses , the machine has two ethernet cards *bnx0 ***and *bnx1
***, *bnx0* is attached to a Cisco internet router and
9 matches
Mail list logo