On Fri, Aug 04, 2006 at 07:25:55AM -0600, Diana Eichert wrote:
Does anyone use their OpenBSD boxes to capture video without using any X
tools?
nope; i was always trying to use it to capture video while watching the
display(station2) :/
If so how do you do it? My thought is to use
On Sat, 5 Aug 2006, jared r r spiegel wrote:
On Fri, Aug 04, 2006 at 07:25:55AM -0600, Diana Eichert wrote:
If so how do you do it? My thought is to use ffmpeg to capture
video off bktr(4).
i did use ffmpeg with some moderate success, but because i didn't
pay much attention to it i
On Fri, 4 Aug 2006, mickey wrote:
On Thu, Aug 03, 2006 at 12:49:17PM -0600, Diana Eichert wrote:
I'm getting the following error when I try to access my bktr(4) card.
$ sudo radioctl -f /dev/bktr0 -a
radioctl: RIOCGINFO: Inappropriate ioctl for device
I was trying to set the tuner
On Fri, Aug 04, 2006 at 07:25:55AM -0600, Diana Eichert wrote:
On Fri, 4 Aug 2006, mickey wrote:
On Thu, Aug 03, 2006 at 12:49:17PM -0600, Diana Eichert wrote:
I'm getting the following error when I try to access my bktr(4) card.
$ sudo radioctl -f /dev/bktr0 -a
radioctl:
NetNeanderthal, mickey, et al
On Thu, 3 Aug 2006, NetNeanderthal wrote:
On 8/3/06, Diana Eichert [EMAIL PROTECTED] wrote:
snip
bktr0 at pci1 dev 14 function 0 Brooktree BT878 rev 0x02: irq 10
bktr0: Askey/Dynalink Magic TView, Temic NTSC tuner.
Brooktree BT878 Audio rev 0x02 at pci1 dev
On Fri, Aug 04, 2006 at 10:46:10AM -0600, Diana Eichert wrote:
NetNeanderthal, mickey, et al
On Thu, 3 Aug 2006, NetNeanderthal wrote:
On 8/3/06, Diana Eichert [EMAIL PROTECTED] wrote:
snip
bktr0 at pci1 dev 14 function 0 Brooktree BT878 rev 0x02: irq 10
bktr0: Askey/Dynalink
On Fri, 4 Aug 2006, mickey wrote:
SNIP
to capture video you need more than just channel setting.
you need to install a port like fxtv or smth...
cu
--
paranoic mickey (my employers have changed but, the name has
remained)
I understand I need an application to capture video, I was
On 8/4/06, Diana Eichert [EMAIL PROTECTED] wrote:
I have a bktr(4) card with an onboard NTSC tuner. I can't control
the bktr(4) setup channel and broadcast type because there is no radio(4)
device attached, probably? because the auto-detect of the tuner failed?
My plan is to pull the card, and
I understand I need an application to capture video, I was planning on
using ffmpeg. I don't want or need to display it locally, that's why I
was trying to avoid fxtv. I thought I could change channels via radioctl,
then stream the capture with ffmpeg. However you keep mentioning fxtv so
On Fri, 4 Aug 2006, Bob Beck wrote:
SNIP
then stream the capture with ffmpeg. However you keep mentioning fxtv so
An OpenBSD powered video capture and archiving device..
Help the Ministry of Information help you...
Good thing this isn't for work, eh? Then you, well not YOU
Original message
Date: Fri, 4 Aug 2006 14:09:56 -0600
From: Bob Beck [EMAIL PROTECTED]
Subject: Re: radioctl error on i386 Aug 1 snapshot; Inappropriate ioctl for
device
To: Diana Eichert [EMAIL PROTECTED]
Cc: misc@openbsd.org
I understand I need an application to capture video, I
On 8/5/06, Jacob Yocom-Piatt [EMAIL PROTECTED] wrote:
Original message
Date: Fri, 4 Aug 2006 14:09:56 -0600
From: Bob Beck [EMAIL PROTECTED]
Subject: Re: radioctl error on i386 Aug 1 snapshot; Inappropriate ioctl for
device
An OpenBSD powered video capture and archiving device
I'm getting the following error when I try to access my bktr(4) card.
$ sudo radioctl -f /dev/bktr0 -a
radioctl: RIOCGINFO: Inappropriate ioctl for device
I was trying to set the tuner to cable/NTSC/channel#.
thanks
OpenBSD 4.0-beta (GENERIC) #1036: Tue Aug 1 01:59:50 MDT 2006
[EMAIL
On 8/3/06, Diana Eichert [EMAIL PROTECTED] wrote:
I'm getting the following error when I try to access my bktr(4) card.
$ sudo radioctl -f /dev/bktr0 -a
radioctl: RIOCGINFO: Inappropriate ioctl for device
I was trying to set the tuner to cable/NTSC/channel#.
OpenBSD 4.0-beta (GENERIC) #1036:
14 matches
Mail list logo
