Thanks for your detailed answer!
Am Sonntag, 16. Oktober 2005 19:14 schrieb Bruce Markey:
Thomas Bürger wrote:
I am using 2 tuners (one DVB-T card and a PVR-350). Both offer the same
channels (more or less), so I set all equal channels to the same database
ID (by using the same name).
To
In the docs it says..
To enable automatic transcoding, do the following: start the setup
program under the host-specific settings: set the Transcoder Auto-run
checkbox
but I can't find it. I might be just missing it, so can anyone tell me
exactly where, on what setup page, it is, and how
Michael T. Dean wrote:
On 10/17/05 00:29, Nick Tan wrote:
I'm probably not installing it correctly, but I click on the link. It
says it's going to install it in the 'Search' bar. I say OK. Then I
look around for it and I cannot find it.
I closed and reopened Firefox, etc., but so far I
--- Ricardo Kleemann [EMAIL PROTECTED] wrote:
Hi,
I have a PVR150 MCE which doesn't come with a remote. I'm trying to
setup
mythtv, but I need to buy a remote which will work well with lircd.
Does the PVR150 MCE come with an IR receiver? If so, does it only
work with
the hauppauge
Hi, I'm working on the initial portion of my MythTV
install, following Jarod's doc (great doc btw!).
In step 5, I ran the Yum upgrade, set the KVER
variable and rebooted. I then ran step 6, adding the
third-party repos, and decided to run yum upgrade
again.
When I do, most of the rpms from
--- Michael T. Dean [EMAIL PROTECTED] wrote:
[Mess of top-/bottom-posts re-formatted so this actually makes
sense...]
Mark Kundinger wrote:
--- Jeff Simpson [EMAIL PROTECTED] wrote:
On 10/6/05, Tj [EMAIL PROTECTED] wrote:
Do you have mythweb running? Is it protected from the
ffrr wrote:
In the docs it says..
To enable automatic transcoding, do the following: start the setup
program under the host-specific settings: set the Transcoder Auto-run
checkbox
I think you'll find it in the recording profiles.
You can set auto-transcode in a recording profile.
Ian Ward wrote:
ffrr wrote:
In the docs it says..
To enable automatic transcoding, do the following: start the setup
program under the host-specific settings: set the Transcoder Auto-run
checkbox
I think you'll find it in the recording profiles.
You can set auto-transcode in a recording
I am trying to clear up occasional glitches I get (pixelisation noise
and chirps in the audio) and noticed these two settings in the adfanced
settings for my DVB card in mythtv-setup. I am trying larger sizes, but
I am just guessing.
What do these settings actually do, and am I on the right
On Sun, 2005-10-16 at 12:44 +0100, John Winters wrote:
I've found that if I use the instructions on the MythTV web site to
create a DVD of a program recorded off a DVB-T transmission, the sound
is off by about half a second when I play the DVD - enough to make the
thing unwatchable.
Following
On 10/3/05, Adam Anderson [EMAIL PROTECTED] wrote:
I laid out all the steps on this forum:http://www.mythtv-xbox.org/phpBB/viewtopic.php?t=36
This is to install mythtv v0.18.x in xebian v1.1.4.So it might be worth a look.The main holdback rightnow I think is the packages.The last install I didwas
Am Sonntag, 16. Oktober 2005 23:35 schrieb Michael T. Dean:
Tom wrote:
does anyone knows how to import a CD while playing some music with
mythmusic?
Manually. ;)
In the future, with mfe/mfd.
Ok, whatever this means ... I gonna google for that ;-).
Hi,
I'm looking to know if someone got sucess to use a Moviebox DV
from Pinnacle that is a converter from analog video and audio to
firewire, to use as capture device for mythtv ? I would like to use
it to capture TV I receive from my freebox (a set top box in france)
to get
Hey,
I'm wondering what people would think of this idea:
Implement the scheduler as an a* search. Heuristic of a found path
could be roughly calculated as:
+ points for a recording a show that needed to be recorded.
- points for not recording the first showing of a show.
+ points for having
I just want to say Thumbs up! Thanks for this excelent plugin. It is amazing how much such a little feature can do for you :)thanksJesperOn 10/17/05,
Michael T. Dean [EMAIL PROTECTED] wrote:
I got tired of going to the Gossamer Threads MythTV page (http://www.gossamer-threads.com/lists/mythtv )
On Sunday 16 October 2005 19:53, [EMAIL PROTECTED] wrote:
I created a Frequency (Hz) to channel
You don't need that, if you have a frequencie list form you cable-company, you
can straight fill in the frequency. Myth accepts both frequencie and
channel-number + finetune.
Henk Schoneveld
The
On Sun, Oct 16, 2005 at 04:51:24PM -0400, Gerald J. Berg wrote:
warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID db42a60e
Public key for perl-XML-SAX-0.12-7.noarch.rpm is not installed
Retrieving GPG key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora
GPG key at
I found this on the Hauppauge site
(http://www.hauppauge.com/pages/products/data_pvr350.html
):
WinTV-PVR-350 contains a highly integrated MPEG-1/2
hardware encoder and hardware MPEG-1/2 decoder.
WinTV-PVR-350 uses the hardware MPEG encoder for
watching live TV, for pausing live TV and for
On 17/10/05, Andy Leung [EMAIL PROTECTED] wrote:
I found this on the Hauppauge site
(http://www.hauppauge.com/pages/products/data_pvr350.html
):
WinTV-PVR-350 contains a highly integrated MPEG-1/2
hardware encoder and hardware MPEG-1/2 decoder.
WinTV-PVR-350 uses the hardware MPEG encoder
Nice job on the search plugin, Mike. Extremely handy for trying to find that
fix that I can never remember :-) Cheers!
-alex
On Sunday 16 October 2005 09:23 pm, Michael T. Dean wrote:
I got tired of going to the Gossamer Threads MythTV page (
http://www.gossamer-threads.com/lists/mythtv )
First of all, I'm new to the list, and only recently started using
mythTV. My experiences so far are very positive, but I'm running into
some minor problems.
I'm running mythTV on Ubuntu 5.10 with two Hauppauge PRV 150's, AMD
Athlon XP 2600, 1 Gig memory and a ATI Radeon 9250. Basically
My mythconverg database is now about 35MB, and I'm starting ot look at
embedded devices to host it, so it would be nice to have the DB
smaller if possible.
Not knowing much about SQL, I did this to figure out which tables are
eating all that space:
mysqldump mythconverg | grep -n
Hi All,
I haven't been able to find any reports of this elsewhere, so I suspect this
is an unusual problem. When navigating in mythfrontend the keyboard works as
it should until it gets to the program guide edit options or similar menu's.
If I attempt to change storage or recording options,
On 17/10/05, Andrew Wilson [EMAIL PROTECTED] wrote:
That spews out the line numbers in the dump for the start of each
table. recordedmarkup accounted for 92% of the lines in my database.
Surely some mistake???
Don't think so. That table is by far the largest in my database as well.
I'm
On 17/10/05, Andrew Wilson [EMAIL PROTECTED] wrote:
My mythconverg database is now about 35MB, and I'm starting ot look at
embedded devices to host it, so it would be nice to have the DB
smaller if possible.
Less recordings = smaller DB ;-)
Not knowing much about SQL, I did this to figure
On 17/10/05, David Barkman [EMAIL PROTECTED] wrote:
Hi, I'm working on the initial portion of my MythTV
install, following Jarod's doc (great doc btw!).
In step 5, I ran the Yum upgrade, set the KVER
variable and rebooted. I then ran step 6, adding the
third-party repos, and decided to run
I tried the symlink, and it seemed to work... until i rebooted.
So now I've got bigger problems. Like before, I uninstalled lirc via
yum and then tried to reinstall yum, which fixed the problem before,
but only until I rebooted.
I did the following
# yum remove lirc-kmdl-$KVER
# yum remove lirc
On 10/16/05, Ricardo Kleemann [EMAIL PROTECTED] wrote:
Thanks. My best solution, until recently, was a Steramzap remote with USB IR receiver from http://www.streamzap.com.It is supported in the recent LIRC release and worked great for me...until I moved my frontend to Fedora
Core 4.Now I
ffrr wrote:
Michael T. Dean wrote:
On 10/17/05 00:29, Nick Tan wrote:
I had the same problem. I tried installing as root and that worked.
For me, it was a permissions issue. It could be the same for you.
Yep. That's usually the case for *nix systems and Mozilla
So there's no way around this? I don't have an SPDIF-out, so
that's not really an option for me. I just want to use the same
control for MythMusic as I do for MythTV -- you'd think this would be
the norm. No way to compile MythMusic with ALSA, or to make its
OSS controls work on a machine using
Thanks.
Does anyone know if the One-4-All URC8820 will also
work with Jaord's guide? With the provided lircd.conf?
The 8820 can be found on eBay for about
$10.
Ricardo
I
don't know about that one, but the One-4-All remotes use the same codes as the
15-2116. I followed Jarod's guide
Tom wrote:
Am Sonntag, 16. Oktober 2005 23:35 schrieb Michael T. Dean:
Tom wrote:
does anyone knows how to import a CD while playing some music with
mythmusic?
Manually. ;)
In the future, with mfe/mfd.
Ok, whatever this means ... I gonna google for that ;-).
Sorry
I am in the process of setting up a mythtv box. Have been looking
through various howtos but am not sure what modules I need to
modprobe.
lspci:-
:02:09.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
:02:09.2 Multimedia controller: Conexant: Unknown device 8802
Hi all
I am getting a strange situation where some of my recordings, seemingly
randomly get corrupt?
I am unable to seek correctly in these recordings. I get one of three
situations.
1: A jump forward, or skip to commercial point results in my hdd running
forever, but the video never skipping
On Fri, Oct 14, 2005 at 03:45:16PM -0500, Alex Brekken wrote:
If one wanted redundancy only (is that RAID-0??) then I take it you would
skip LVM entirely, correct? - IOW, are the 2 mutually exclusive or can you
use LVM with RAID? The reason I ask is because I'm starting to put together
some
This looks like a good idea, thanks for posting it. One thing I
notice in glancing at it, though:
for TARGET in `ls -tr *.nuv`
In the current SVN version, only MPEG4 recordings end in '.nuv'.
MPEG2s end in '.mpg'.
--
Dan Wilga [EMAIL
Can anyone please point me to some resources that talks
about setting up a PVR-500 to receive radio channels.
I would like to record radio stations.
Thanks
___
mythtv-users mailing list
mythtv-users@mythtv.org
On 17/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
I am in the process of setting up a mythtv box. Have been looking through
various howtos but am not sure what modules I need to modprobe.
with my Hauppauge Nova-t (which looks to be the same model as yours)
all I needed to modprobe was dvb-cx88
On 10/17/05, David Watkins [EMAIL PROTECTED] wrote:
On 17/10/05, Ben Edwards [EMAIL PROTECTED] wrote: I am in the process of setting up a mythtv box.Have been looking through various howtos but am not sure what modules I need to modprobe.
with my Hauppauge Nova-t (which looks to be the same model
Does anyone know of a good working guide to install mythtv and devices from fresh install of Ubuntu/Debian?
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
On 17/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
On 10/17/05, David Watkins [EMAIL PROTECTED] wrote:
On 17/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
I am in the process of setting up a mythtv box. Have been looking
through
various howtos but am not sure what modules I need to
I have just used apt-get to install mythtv on a ubuntu breezy box. All seems to go well exept I get:
Starting MythTV server: mythbackendSession management error:
Authentication Rejected, reason : None of the authentication protocols
specified are supported and host-based authentication failed
On Sun, 16 Oct 2005 13:46:36 -0400, Mark Rissberger wrote:
Mark Rissberger wrote:
I figured that I'd post my modules.conf to see if anyone has any
suggestions.
Thanks
alias char-major-61 lirc_i2c
alias eth0 forcedeth
alias scsi_hostadapter sata_nv
alias snd-card-0 snd-intel8x0
options
Steve Adeff wrote:
What sources do you have active? I find having Stable normally active with
Testing and Unstable available but commented out lets me safely update and if
I want to be bleeding edge I will enable Testing then Unstable in that order.
I also find for some apps its better to
Thanks, Matt, I haven't had a chance yet to study Myth's database structure. This
will help.
Kirk
Matt SF wrote:
...and then select using the names for the appearance settings from the
table channel :
___
mythtv-users mailing list
Ben Edwards wrote:
I have just used apt-get to install mythtv on a ubuntu breezy box.
All seems to go well exept I get:
Starting MythTV server: mythbackendSession management error:
Authentication Rejected, reason : None of the authentication protocols
specified are supported and host-based
On 10/17/05, Jon Kunze [EMAIL PROTECTED] wrote:
I tried the symlink, and it seemed to work... until i rebooted.
So now I've got bigger problems. Like before, I uninstalled lirc via
yum and then tried to reinstall yum, which fixed the problem before,
but only until I rebooted.
I did the following
On 10/7/05, Matt [EMAIL PROTECTED] wrote:
On 10/7/05, Nick [EMAIL PROTECTED]
wrote:
On 07/10/05, Matt
[EMAIL PROTECTED] wrote: About a month or two ago I updated both my boxes (one frontend/backend combo and another frontend) to the same version of SVN at that time.On my single frontend,
On Monday 17 October 2005 04:45, Lucas Meijer wrote:
Hey,
I'm wondering what people would think of this idea:
Implement the scheduler as an a* search. Heuristic of a found path
could be roughly calculated as:
+ points for a recording a show that needed to be recorded.
- points for not
On 10/16/05, A JM [EMAIL PROTECTED] wrote:
Thanks for the feedback. I saw a post on the download site's forum
that someone else was having a problem also? Hopefully they'll take a
look at it and be able to fix it.
Do you mind if I ask how you were installing it? Where you copied it to, etc?
I
Ime doing this at the moment. There is one on the ubuntu
wiki. Using the new Breezy version seems to be the way to
go.
BenOn 10/17/05, Phil Strong [EMAIL PROTECTED] wrote:
Does anyone know of a good working guide to install mythtv and devices from fresh install of Ubuntu/Debian?
On Monday 17 October 2005 06:40, Alex Cruz wrote:
Nice job on the search plugin, Mike. Extremely handy for trying to find
that fix that I can never remember :-) Cheers!
-alex
amen, this search plugin is gunna make dealing with mythtv much easier!
Steve
On Monday 17 October 2005 10:54, Phil Strong wrote:
Does anyone know of a good working guide to install mythtv and devices from
fresh install of Ubuntu/Debian?
Ubuntu is a hacked version of Debian, so don't think following a Debian guide
will necesarily work. There are a few folks running with
Thanks Brandon, that makes sense. For a masterbackend server that
will probably have at most 2 clients, I don't get the feeling that
striping the drives is necessary from a performance standpoint.
I'm still trying to decide how to tackle the redundancy/backup
issue. I'm wondering if doing this via
Kevin Kuphal wrote:
Tom Hines wrote:
Hello. I did an apt-get update; apt-get upgrade today and now my
system is borked. I can't play any video files -- no recordings or
other. I get one second of audio and a blank screen. I see no error
messages in /var/log/messages or
There is a guide at mythtv.info but it is not for breezy.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Alex Brekken wrote:
Thanks Brandon, that makes sense. For a masterbackend server that
will probably have at most 2 clients, I don't get the feeling that
striping the drives is necessary from a performance standpoint. I'm
still trying to decide how to tackle the redundancy/backup issue.
On Monday 17 October 2005 11:08, Tom Lichti wrote:
I've done an apt-get upgrade of my (rarely used) slave backend, and one
frontend, and they both still work. I use Myth from source though, not
rpms. I still haven't worked up the nerve to do my main combined
front/backend (see next sentence!)
Chris Trown wrote:
Kevin Kuphal wrote:
Tom Hines wrote:
Hello. I did an apt-get update; apt-get upgrade today and now my
system is borked. I can't play any video files -- no recordings or
other. I get one second of audio and a blank screen. I see no error
messages in /var/log/messages
Steve Adeff wrote:
Yea, its even a internal conflict for me, I really do want to make sure I get
my shows recorded, but the desire to see what new fixes, bugs and features
have been added is a pretty a big desire as well
I've found that keeping up with SVN and compiling from source
On Monday 17 October 2005 02:30, Mark Kundinger wrote:
--- Ricardo Kleemann [EMAIL PROTECTED] wrote:
Hi,
I have a PVR150 MCE which doesn't come with a remote. I'm trying to
setup
mythtv, but I need to buy a remote which will work well with lircd.
Does the PVR150 MCE come with an IR
Does anyone know of a good working guide to install mythtv and devices from
fresh install of Ubuntu/Debian?
I had a good experience with this one:
http://www.abarbaccia.com/component/option,com_smf/Itemid,39/
It is not geared toward the very latest/greatest version of Ubuntu but it lays
out
On Monday 17 October 2005 12:39, Kevin Kuphal wrote:
Steve Adeff wrote:
Yea, its even a internal conflict for me, I really do want to make sure I
get my shows recorded, but the desire to see what new fixes, bugs and
features have been added is a pretty a big desire as well
I've found
Matt wrote:
On 10/7/05, *Matt* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]
wrote:
On 10/7/05, *Nick* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
On 07/10/05, Matt [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
About a month or two ago I updated both my
Steve Adeff wrote:
On Monday 17 October 2005 02:30, Mark Kundinger wrote:
--- Ricardo Kleemann [EMAIL PROTECTED] wrote:
Hi,
I have a PVR150 MCE which doesn't come with a remote. I'm trying to
setup
mythtv, but I need to buy a remote which will work well with lircd.
Does the PVR150
Steve Adeff wrote:
On Monday 17 October 2005 02:30, Mark Kundinger wrote:
--- Ricardo Kleemann [EMAIL PROTECTED] wrote:
Hi,
I have a PVR150 MCE which doesn't come with a remote. I'm trying to
setup
mythtv, but I need to buy a remote which will work well with lircd.
Does the PVR150
On Monday 17 October 2005 12:56, Kevin Kuphal wrote:
Steve Adeff wrote:
On Monday 17 October 2005 02:30, Mark Kundinger wrote:
--- Ricardo Kleemann [EMAIL PROTECTED] wrote:
Hi,
I have a PVR150 MCE which doesn't come with a remote. I'm trying to
setup
mythtv, but I need to buy a remote
On Monday 17 October 2005 12:52, Tom Lichti wrote:
Steve Adeff wrote:
On Monday 17 October 2005 02:30, Mark Kundinger wrote:
--- Ricardo Kleemann [EMAIL PROTECTED] wrote:
Hi,
I have a PVR150 MCE which doesn't come with a remote. I'm trying to
setup
mythtv, but I need to buy a remote which
That's a great help!Your above steps were how Ithought I read the install but was hoping someone had already given it shot.
I'd stumbled across 404 a couple months ago but was unable to get my XBOX to boot from a CD so I was unable to do the install. A loopback install will get me going again
On 10/17/05, A JM [EMAIL PROTECTED] wrote:
That's a great help!Your above steps were how Ithought I read the install but was hoping someone had already given it shot.
I'd stumbled across 404 a couple months ago but was unable to get my XBOX to boot from a CD so I was unable to do the install. A
On 10/3/05, Adam Anderson [EMAIL PROTECTED] wrote:
I laid out all the steps on this forum:
http://www.mythtv-xbox.org/phpBB/viewtopic.php?t=36
This is to install mythtv v0.18.x in xebian v1.1.4.
So it might be worth a look. The main holdback right
now I think is the packages. The last
On 10/17/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
On 10/3/05, Adam Anderson [EMAIL PROTECTED] wrote:
I laid out all the steps on this forum: http://www.mythtv-xbox.org/phpBB/viewtopic.php?t=36 This is to install mythtv
v0.18.x in xebian v1.1.4. So it might be worth a look. The main
I have a HD-3000 card that I got working using the 18.1 Debian packages.
However, upgrading to SVN resulted in the frontend spewing A/V diverged by
dropped frames number here frames, extending frame to keep audio in sync in
it's logs.
I guess I need to layout my system and what I've found out
What about this one?
http://www.abarbaccia.com/
e.
--
http://www.byopvr.com
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
On 17/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
On 10/17/05, David Watkins [EMAIL PROTECTED] wrote:
On 17/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
I am in the process of setting up a mythtv box. Have been looking
through
various howtos but am not sure what modules I need to
I'm experiencing a similar issue. Only thing different is mine
actually works for a few minutes after a restart. After a few
minutes, lircd stops responding.
I found a post, I think it was this list that basically said there was
an issue in the ivtv driver and the workaround was to setup a cron
Folks,
I'm working on getting my new Digimatrix set up as a myth
frontend/backend. It's a good little box; inexpensive, speedy and o
so quite. I have a couple of questions about things I haven't been
able to work out yet.
First, the remote plugs into the keyboard jack, and
On Sun, Oct 16, 2005 at 10:23:09PM -0400, Michael T. Dean wrote:
I got tired of going to the Gossamer Threads MythTV page (
http://www.gossamer-threads.com/lists/mythtv ) every time I wanted to
search the mailing list archives, so I created a Mozilla/Firefox
(Mycroft) search plugin for
On 10/17/05, Tom Lichti [EMAIL PROTECTED] wrote:
Well, you didn't directly answer the question about which SVN versionyou are running, but I know the particular issue was resolved pretty
quickly. It certainly doesn't do it with current SVN (which I've beenupdating almost
Matt wrote:
On 10/17/05, *Tom Lichti* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
Well, you didn't directly answer the question about which SVN version
you are running, but I know the particular issue was resolved pretty
quickly. It certainly doesn't do it with current
Verify the permissions on the lirc devices are 666
I am pretty sure once I had to pass --permission=666
--device=/dev/lirc/lirc0 because the devices were created with 600
permissions and lircd was looking for /dev/lirc which was actually a
directory
Ant Daniel wrote:
On 10/17/05,
Thanks for the post Rob.
Your distro is running Xebiannot Fedora correct?
AJM,
On 10/17/05, Robert Anderson [EMAIL PROTECTED] wrote:
On 10/17/05, A JM [EMAIL PROTECTED] wrote:
That's a great help!Your above steps were how Ithought I read the install but was hoping someone had already given
On 10/14/05, Tim Ward [EMAIL PROTECTED] wrote:
My iPod theme uses the blue theme so anything that isn't finfished is the
blue theme. There are two major drawbacks so far in doing the iPod.
1. I use the Chicago.ttf which is not a default font.
http://en.wikipedia.org/wiki/Chicago_(font)
Just
Although I'm not a big fan of watching video content on a 2 screen, I
think there could be a big potential for recordings to be transcoded
to work on the new video iPod. The best thing about it is that you
don't have to watch the video on the iPod, you can actually have a
video out to another
I have a digimatrix running briliiantly (for about a year now).
This site has it all (including how to get TV Tuner, Remote, LCD, Volume
Dial etc).
http://asusfan.linux-site.net/index.html
David
- Original Message -
From: Peter Darley [EMAIL PROTECTED]
To: Discussion about mythtv
Paul Barker wrote:
Hi
Sorry for the long delay and thanks to those who made suggestions.
My setup is a b/e running FC3 with 1 PVR 250 as capture device. 2 X remote
frontends, 1 X FC3, 1 X Minimyth diskless EPIA. 100Mb wired network via
Linksys switches.
A brief recap of the problem - when
I've got the IVTV and DVB-S to co-exist, but when I attempt to load the
air2pc module, I get the following:
--- cut here ---
[4294707.062000] drivers/media/dvb/b2c2/skystar2.c: FlexCopIIB(rev.195)
chip found
[4294707.062000] drivers/media/dvb/b2c2/skystar2.c: the chip has 38
hardware filters
So does anyone know if the One-4-All URC8820 will work with Jarod's guide,
and the lircd.conf he provides?
My Hauppauge card doesn't have an IR receiver, I do have one connected to my
serial port but I need to configure lircd.conf properly... I was hoping to
get a remote for which there's already
Ricardo Kleemann wrote:
So does anyone know if the One-4-All URC8820 will work with Jarod's guide,
and the lircd.conf he provides?
My Hauppauge card doesn't have an IR receiver, I do have one connected to my
serial port but I need to configure lircd.conf properly... I was hoping to
get a
On Thursday 13 October 2005 22:01, Justin Hunt wrote:
In fact its not the import that is unbearable its trying to select
music to play thats slow.
Information that would have been useful about ten posts ago...
I seem to recall that this might have been an issue before... but of
course, you
On 10/17/05, Mike Frisch [EMAIL PROTECTED] wrote:
I've got the IVTV and DVB-S to co-exist, but when I attempt to load theair2pc module, I get the following:--- cut here ---[4294707.062000] drivers/media/dvb/b2c2/skystar2.c: FlexCopIIB(rev.195)chip found
[4294707.062000]
Hi,
I am wondering if the MCE EPG system can be used
with MythTV.
Does anyone know something about the format and the
servers that the MCE EPG system is using ?
Niels Dybdahl
___
mythtv-users mailing list
mythtv-users@mythtv.org
On Saturday 15 October 2005 19:18, perlguy9 wrote:
Hello,
I've got a bunch of recorded programs filling up the disk, all of
which have
Auto-Expire: Yes in the Mythweb listing, but none of them
are being expired when the disk fills up.
Is there something else I need to do to make this
I've got a bunch of recorded programs filling up the disk, all of which
have Auto-Expire: Yes in the Mythweb listing, but none of them
are being expired when the disk fills up.
Is there something else I need to do to make this happen? A cron job I'm missing or something?
I had the same problem
i wrote this quick script to kind of load balance my oldest videos off
to a remote box when i get close to full. (set up as a nightly cron
job) not the best way in the world to handle this, i know, but a
partial solution bests no solution.
anyway, figured it might be useful to others.
On 10/14/05, Kevin Kuphal [EMAIL PROTECTED] wrote:
Mark Gardner wrote:
Commercial Flagging is not working anymore.
I'm getting this error in the backend logs.
Commercial Flagging ERRORED for The Drew Carey Show Science Names
Suck recorded from channel 1010 at Fri Oct 14 13:00:00 2005, unable
On Mon, Oct 17, 2005 at 05:16:57PM -0400, Joseph A. Caputo wrote:
On Saturday 15 October 2005 19:18, perlguy9 wrote:
I've got a bunch of recorded programs filling up the disk, all of
which have Auto-Expire: Yes in the Mythweb listing, but none of
them are being expired when the disk fills
Hi:
Is there any way I can disable all of the OSD stuff from being
displayed? I've got an XP2600 with an 8X AGP GF4 MX440. I can play
back 1080i content just barely, but when the processor is pegged, my
HD-2000 tends to drop out without recording the whole show (lots of
FBUS errors in dmesg).
Mark Gardner wrote:
On 10/14/05, Kevin Kuphal [EMAIL PROTECTED] wrote:
Mark Gardner wrote:
Commercial Flagging is not working anymore.
I'm getting this error in the backend logs.
Commercial Flagging ERRORED for The Drew Carey Show Science Names
Suck recorded from channel 1010 at Fri
If you only have a few videos to do, local chemist shops often can
convert VHS - DVD which can then be ripped
g
On 10/15/05, David Whyte [EMAIL PROTECTED] wrote:
On 10/16/05, David Whyte [EMAIL PROTECTED] wrote:
I know the avermedia cards have a video AV slot, but was wondering how
I
1 - 100 of 128 matches
Mail list logo