On 1/29/06, Jonathan Smith <[EMAIL PROTECTED]> wrote:
> On 1/29/06, Jens Baumeister <[EMAIL PROTECTED]> wrote:
>
> > On 1/29/06, Claude Gélinas agr. <[EMAIL PROTECTED]> wrote:
> >
> > > I can view the recording and edit it with my remote but do I need to
> > > same some data to a cutlist.file to p
In my opinion it is essential to have a keyboard to edit the cutlist,
I have a knoppmyth boot cd that I use as a frontent to do this very
task. The autogenerated cut list does a decent job, but never perfect
from my experience.
On 1/29/06, Jens Baumeister <[EMAIL PROTECTED]> wrote:
> Hi!
>
> On 1
On 1/29/06, Yan Seiner <[EMAIL PROTECTED]> wrote:
> Michael T. Dean wrote:
>
> >>2006-01-28 16:30:08.176 NVR: Error, cannot open DSP '/dev/dsp'
> >>open: No such device or address
> >
> >Fix your sound...
> >
> >
> OK, how do I do that? The backend sits in a room far away from the
> frontend. I w
Hi!
On 1/29/06, Claude Gélinas agr. <[EMAIL PROTECTED]> wrote:
> I can view the recording and edit it with my remote but do I need to
> same some data to a cutlist.file to process it after with mythburn
As far as I know, the mythburn scripts automatically use the mythtv
cutlist - at least they d
On 1/28/06, wrote:
>Do you have the firewall enabled on the backend?
No, its turned off and SELinux is disabled.
On 1/28/06, Chad wrote:
>A quick last thought: >>Are the backend and the frontend running the exact same version
>(0.18.1
On 1/28/06, Chad wrote:
>I don't think you necessarily have to change the host IP, so for >testing, leave it at loopback.
Ok, done.
>Make sure you have the correct internal IP for the backend: >/sbin/ifconfig
Yes, I do. I set all my IPs statically, just so I avoid
I did mean MythStreamTV. The rpm I was referring to was the rpm for
vlc, I had to install MythStreamTV via script. There are some
dependencies that will need to be installed before you can install
vlc, at least on FC4, one of them being libmodplug, yum doesnt have
the rpm available, so had to go
HelloThank you for this...I have tried several revision of nVidia before but it didn't make any difference.I'm now recompiling a kernel with a higher kernel frequency (1000Hz) and will downgrade the nvidia driver as well while I'm at it.
Will keep you posted. It seems that a few people have issues
On Sun, 2006-01-29 at 09:40 -0500, Claude Gélinas agr. wrote:
> I can view the recording and edit it with my remote but do I need to
> same some data to a cutlist.file to process it after with mythburn
You create a cutlist for a transcoder by entering edit mode with 'e'
while viewing the recording
> I recently noticed that my SBE/FE machine has a mysqld running.
> I'm guessing that there's no reason for this to be the case, since
If the myth database is running on the master then no, you don't need
this second instance of mysqld running.
___
my
I've googled about and it seems that the solution is to manually enterthe frequency tables into mySQL... Before I go that route, I figured I'd
ask for advice.Any suggestions?
It is probably easier to enter the frequencies via MythWeb or via mythtvsetup.
Note that you can enter either the channel nu
Another problem I've got since upgrading from 0.18 to SVN, is a
repeating "AFD Error: unknown decoding error" that seems to sometimes
crash mythbackend and sometimes cause mythtranscode to eat upwards of
half a gig of memory and throw my myth box into a swap hell.
I tried reporting this to Trac, b
I want to cut commercial and some other part of a recording
once I've recorded the film how can I produce the cut list
I can view the recording and edit it with my remote but do I need to
same some data to a cutlist.file to process it after with mythburn
Could someone explaine a little bit more
John Andersen wrote:
\> In that case you are truly on a fools errand.
>
> You will NEVER save enough energy with this CPU to recover
> your costs. Vastly more power could be saved by huge passive
> heat sinks and getting rid of fans.
That may be true, however I have observed (measured) that a mo
Michael T. Dean wrote:
>On 01/28/2006 08:44 PM, Yan Seiner wrote:
>
>
>>I've been using MythTV successfully for about a year...
>>
>>But now I want to watch TV.
>>
>>
>>
>
>patient man... ;)
>
>
Well, I built MythTV as a means of keeping my kids from trashing tapes
and DVDs. It works
Thanks,
It says it's trying to load a shared object called liblibmythmythvideo.so, which of course isn't there, but there is also no libmythvideo.so. My guess is that the error message is wrong, and its acutally looking for
libmythvideo.so. Not sure what happened to that, but I'm trying to in
On Jan 29, 2006, at 6:38 AM, Michael T. Dean wrote:
> Sonni Nørløv wrote:
>
>> I think I have see something similar, and it turned out to be related
>> to the opengl driver.
>
> ...
>
> Yeah. There's a known bug in the 8178 driver that results in 100% CPU
> usage when using OpenGL vsync. So, ei
Sonni Nørløv wrote:
> I think I have see something similar, and it turned out to be related
> to the opengl driver.
...
Yeah. There's a known bug in the 8178 driver that results in 100% CPU
usage when using OpenGL vsync. So, either don't use 8178 (best bet) or
turn off OpenGL vsync (which r
Hi all,
jus a quick update_
On 1/15/06, Jens Baumeister <[EMAIL PROTECTED]> wrote:
> since the LiveTV changes seem to lead to questions again and again
> (and sometimes to flamewars), I volunteer to write an FAQ about it.
Thanks for all the info - urgent family matters have been keeping me
busy
Is this the 24-bit Live! ?
Is your sound into the SB through the AUX IN on the card?
--
Message: 1
Date: Wed, 25 Jan 2006 10:45:02 -0500
From: Dave Bixler <[EMAIL PROTECTED]>
Subject: Re: [mythtv-user
Is it possible to use nuvexport on a host remote from the backend?
I have a more powerful machine than the backend one, which runs
mythfrontend fine. However, when I try and use nuvexport I get:
Loading MythTV recording info.
This host not configured for myth.
(No Rec
Since switching from 0.18.x to SVN a few weeks ago, an old problem has
reappeared - the EPG keeps switching between Finnish and Swedish program
info (as both are broadcasted in the DVB stream). With 0.18 I found that
setting PreferredLanguages to 'fin' helped, but it doesn't any more.
Sometimes pro
> Hello, I installed MythStream, installing all of the required
> dependencies via rpm.
Would you mind sharing where you got the RPMs from? I didn't think
there were any.
PS - I presume you mean MythStreamTV, not MythStream? They're 2 very
different things.
Regards,
Phill
___
I'm running the latest version of nuvexport (nuvexport-0.2_pre20060118
on Gentoo) and I'm getting an error when I try to do a MPEG2->MPEG2
export. I ran nuvexport with the debug flag and this is the command it
told me to run manually:
$ mpeg2cut /mnt/store/1004_20060126213000_20060126215900.n
Hi,
I think I have see something similar, and it turned out to be related
to the opengl driver.
On my p3 733mhz, with a similar pvr250 and fx5200 running gentoo,
everything was running fine at ~25% idle when watching live tv.
Then after an update, including a new nvidia driver, I got prebuff
Michael T. Dean wrote:
>On 01/27/2006 09:36 PM, ffrr wrote:
>
>
>>
>>So, I then set the second show to start early by -5 minutes (that's
>>negative 5) and this worked, allowing both shows to record, and missing
>>the first 5 minutes of the second show.
>>
>>Is there a better way to handle this
> > Depending on the language you use, MythWeb has the ability to use
> > different languages. If you use the English language prompts (located in
> > the file /var/www/html/mythweb/languages/English.php in my own distro),
> > you can change the displayed time by modifying the 'generic_time' lin
On Jan 28, 2006, at 11:29 PM, John Nelson wrote:
> Hail Fellow Myth-folk,
>
> I just finally got a system up and running. I had some issues and
> then
> ran out of time until Christmas holidays.
>
> I am not having problems, however, where the network card for the
> backend seems to cease work
On Sat, 2006-01-28 at 16:33 -0800, Bruce Markey wrote:
> johan Henæs wrote:
> > Hi !
> >
> > I have a weird problem in my setup. (0.18.1 running on Ubuntu)
> > My Master Backend is running just fine as a "standalone". Due to lack of
> > PCI-slots i had to place my second PVR 350 in my frontend, c
101 - 129 of 129 matches
Mail list logo