I am running (or trying to) MythTV on the Fedora Core using a PVR-150.
I have validated that if I
CAT /dev/video0 > testfile.mpeg
it is recroding tv.
However when I try to configure the Source, I make it a PVR-250/350 Card (x50
isnt listed in the newest one from the Fedora Core doc
(h
> nice, easy to read list of what's available. I have cron run it at
> 3 and
> 33 past the hour, so it's reasonably up to date. You could run it
> every
> 5 minutes, if needed, it's not cpu intensive.
>
> Tom
> __
; you
>>> want to watch in mythweb, you can mouse over the link, look at the
>>> filename, and then open that one in VLC.
>> You could do what I do, use mythrename.pl (if using SVN) or
>> mythname.sh
>> (I think) with 0.18
> mythlink.sh with 0.18 ;)
>
>
? I assume the CPUs will be fine for recording, but slow to
commercial flag and the occasional transcoding I do.
Thoughts?
Thanks,
Todd
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
about mythtv
Subject: Re: [mythtv-users] Barebones Systems - Opinions on the Pundit
Thanks for the feedback.
Did you have any trouble setting up the ATI video card under Linux?
I'm just curious because I heard mix reviews.
Thanks
PS What is a slave backend?
Greg Woods wrote:
>On We
Jarod's how-to under Tips and Tricks "Make Myth more Wife friendly"
(http://wilsonet.com/mythtv/tips.php) has a technique to make a button the
remote restart the frontend.
- Todd
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL
Does anyone know what frequency the Tivo remote works at?
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
MB is Childs
play.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Steve Adeff
Sent: Saturday, December 24, 2005 2:33 AM
To: mythtv-users@mythtv.org
Subject: Re: [mythtv-users] Newbie's Hardware any problems?
On Friday 23 December 2005 20:05, John Ande
f to
tape once a day.
Hope that helps,
Roy
joe byrne wrote:
> I have phpMyAdmin installed, and I used it to browse the database.
Alternatively, you can handle things from the command line. The
> following will tell you what password you entered into myth:
>
> $ mysql -u mythtv -pmythtv
&
#DetailSpecs
Rough Price before looking around is $845
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Anyone see any problems with either of these cases for a
Myth Front-end/Backend combo install?
SN95G5
http://global.shuttle.com/Product/Barebone/SN95G5%20V3.asp
SN25P
http://global.shuttle.com/Product/Barebone/SN25P.asp___
mythtv-users mailing
On Monday 19 December 2005 10:00, Joacim J wrote:
> I already have a file server with Open SUSE 10 and now I will have a HTPC
> with MythTV. I have found Jarods excellent HOWTO regarding Fedora and
> MythTV.
> It is much more easier if I have the same Linux distribution on all
>
Title: [mythtv-users] Re: Need help / suggestion for building a myth box
Thanks everyone for your
comments about the Music portion of Myth. However could we move on to the
original question about hardware.
Here are my Goals
- Small Quiet system
- DVD library (Main Goal)
I
so do you mind sharing some of your hardware specs?
In addition, I am currently am using Etivo to pull shows off my DirectTivo
From: [EMAIL PROTECTED] on behalf of Chris Ribe
Sent: Tue 12/13/2005 9:44 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users]
esults? I'd like to know before I spend more
money on a processor for it.
>
> ___
> mythtv-users mailing list
> mythtv-users@mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
also like to use my Direct TV Tivo remote
It has a
switch for Satellite receiver or TV
Thanks in advance
-Matt_______
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
sure of the config, but from what I just Googled, it
likely looks like this: "config = seek -5". You'll want to change that 5
to a 15.
Hope it helps,
Roy
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
h the new gcc, but nothing worked. And
revdep-rebuild didn't catch it either. I still don't know what went wrong,
but whatever it was, 'emerge -e world' fixed it.
Thanks for the input.
Roy
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
g works fine for a
split second (no joking). I get audio and video for about half a second or
so before the audio stops and the video freezes for about 20 seconds.
After that, I get dumpted back into Myth with the error "Error was
encountered while displaying video".
Anyone have any ideas?
t I want to do:
>
> #First kill any mythfrontend process that is running
> sudo killall mythfrontend
> #
> sudo mythfrontend -l /var/log/mythtv/mythfrontend.log
> &
Firstly ISTR Jarod has a section with a 'restart' script and how to link it to
your remote, base a scri
mand string that might work
> for ya:
>
> xine -pfhq --no-splash dvd://
I did the same thing, but I also use a '-B' switch (borderless). Works
like a champ.
Roy
_______
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
27;t know where to
start!
I'm currently running a P4 2.8GHz with 1Gb, twin Nova-T's and a 128Mb AGP
Nvidia MX440 with the TV out of composite (AV) at 1024x768 and running SuSE
10.0/mythtv 18.1 Disk space is er plenty (2TB+ if need be)
I've got a few questions that some of our U
MPEG-2 happens on the card in real-time with no CPU impact.
The encoding from MPEG-2 to MPEG-4 happens non-real-time (like commercial
flagging) after the recording so it is CPU intensive, but can be run "nice"
so it doesn't impact other processes.
____
11g) wireless router is. Upstairs I can connect and play but get
skips/pauses. Also there must be nothing else trying to use the connection
otherwise it skips.
For 'normal' use (surfing, ssh, vnc, rdc etc) it's fine but personally I'd
agree and avoid if y
Do you need the Rev
B HD1000 with the extra RAM or is the Rev A enough for
MythRoku?
Thanks,
Todd
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
re1.tar.bz2. It's
time stamp is November 14.
Hope it helps,
Roy
_______
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
t;*> I2C device interface
The above worked for me with my Hauppauge pvr-250 which uses i2c. Of
course, the ivtv and related modules had to be loaded first.
Also, since I'm using a kernel > 2.6.13, I had to use the lirc out of CVS.
Roy
_________
at part in my original reply. Thanks for pointing that out.
Roy
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
John DiLorenzo wrote:
> I'm using the lircrc file for that remote listed on Jarod's page. It
> seems
> to be complete and in the correct places, including a .lircrc file located
> in the MYTHTV user's home folder.
Using a ~/.lircrc file leads one to believe that yo
an nvidea card using s-video with nvidia's driver? If so,
does it support console frame buffer through s-video or is the driver
strictly for X?
Thanks in advance,
Roy
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mail
On Monday 05 December 2005 21:04, Beny Spensieri Jr wrote:
> [EMAIL PROTECTED]:
> > My questions:
> > 1) What is causing the Segmentation fault?
> > From the looks of things you're running i686 code
>
> when it's
>
> > expecting x86_64.
>
it will happen though. ;)
_______
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
On Monday 05 December 2005 19:38, Beny Spensieri Jr wrote:
> I have run into the problem of mythfrontend
> Segmentation faulting on me.
>
> I have done some searching for this on the net, but
> have yet to find a solution.
>
> I am using a 64 bit Intel processor with FC4
ssed latest backup, the --add-drop-table isn't
really needed but I use it as it makes it easier (for me) to mix and match
what tables to restore.
#!/bin/bash
/usr/bin/mysqldump -all --add-drop-table -u mythtv -pmythtv mythconverg -c
> /home/backup/latest_db_backup.sql
cp /home/backup/l
My MythTV box is currently running with an old Voodoo 4500 I had laying
around. Since I didn't have a card with a tv-out interface, I used a
VGA-to-composite converter I picked up on the cheap. It gets the job done,
but tends to cause a slightly fuzzy picture and occassionally gets out of
edora Core 4 - all up to date
> MythTV SVN revision 8053
>
> As a relative newbie to Linux I think I've been getting on quite well,
> but the one thing that is completely defeating me is connecting the
> Hauppauge remote control to Myth. From the outset there are five keys
> on th
automount maps access to an automounted file system is
customarily done using the path scheme:
/mountpoint/key/path/file"
Your mount point is "/mnt/auto" and your key is "cd", so try using
/mnt/auto/cd and you should get results.
Roy
_______
n.
The Manifest is created during that step.
Roy
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
ns here to install it:
http://gentoo-wiki.com/HOWTO_Installing_3rd_Party_Ebuilds
You'll also have to unmask it by adding "=app-misc/lirc-0.8.0_pre1 ~x86" to
/etc/portage/package.keywords and emerged it as normal.
Hope it helps,
Roy
_______
few posts back to as there is more information on how to find
> the code for your DirectTV box.
>
>
> Lee
> _______
> mythtv-users mailing list
> mythtv-users@mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
oubt I want to pay for another cable box
since much of what we watch is on analog anyway. I'm pretty sure I saw that
this was NOT possible in Windows, and saw some stuff in the archives LIRC can
do that now.
_______
mythtv-users mailing list
mythtv-use
concern is that for now I would need the recordings viewable on my
MVP. But
you're right - I was thinking about getting another 150 anyway (MCE so I could
get radio).
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-
Anyone know anything about this tuner card? I can't find any info about what
the tuner chip is or whether it is supported by MythTV. It also has a remote,
but I don't know if the receiver is USB or plugs into the card. It would be
worth 20 bucks if it just had a USB remote, but an e
Has anyone been successful in getting the onboard IRBlaster of a PVR150 to
work with directtv using lirc or some other program? Any help would be
appreciated I am pulling my hair out over this one.
___
mythtv-users mailing list
mythtv-users@mythtv.org
I have to agree. I when I 1st started down the path with my MythTV.. I
went HW raid off the bat and bought the 3ware 7500-8 The only thing it was
a pricey product who WOW does it work great.. I NFS my frontends toa
500gig partition for my myth I was running 2 frontends but I am down to
Graeme wrote:
>
>
> Since the recent introduction of More4 I've got a new entry
> in my program guide, but there's no program descriptions or
> titles. How do I get MythTV to pick up the info?
You need to amend the mythfilldatabase setup as well as the chan
Hence the reason that it's being phased out of
Myth.
Using PS causes problems with wrong audio tracks, glitchy sound and video,
etc. Stick to TS.
Lee
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
How do you trouble shoot transcoding error?
I have a MythTV with PVR250
Transcoding failing;
mythbackend.log
2005-11-10 15:57:44.215 Reloading backend settings
2005-11-10 15:58:20.205 mythbackend: Running housekeeping thread
2005-11-10 15:58:20.268 Running LogClean
2005-11-10 15:59:35.447
Sent: Wednesday, November 09, 2005 11:05 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Converting VGA ([EMAIL PROTECTED]) to component
Stephen Hocking wrote:
>Hi all,
>
>I have an InFocus X1 projector, which in addition to handling HDTV & TV
>formats also does VGA, up
I'm just getting started setting up a MythTV system and figured I'd use
Knoppmyth to get acquainted with everything first. So far it seems to be
coming along, but one thing I'm running into that I can't explain is
configuring the weather. When I go into the "Wea
dvb support.
> 4) IVTV version.
0.3.8
> 5) Firmware version?
ivtv-fw-dec.bin - Version 2.02.023
ivtv-fw-enc.bin - Version 2.04.211
> 6) System Memory
512Mb
HTH
David
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
easiest on install).
FWIW All I had to do (on SuSE 10, upgrading from SuSE 9.1) was to set the
mount point.
HTH
Druid
_______
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
don't compress well, more like 24-26Gb I'd have thought.
[1] Chucking the ones over 7 years old (we have to keep them for 7 years)
[2] 1989
[3] ie no compression.
_______
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
-- Benjamin
Franklin
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I have a Cisco Switch, and my networking background is to not let
anything static do any 'auto'. I want FD, so the switch is set
too many times since the last
time.
[2] Not noticed until well after the event the first time and spent ages
trying to work out what went wrong, noticed 3 days the second time and was
able to tie it down to when the machine locked.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Ben wrote:
>On 10/21/05, Phill Edwards <[EMAIL PROTECTED]> wrote:
>> I am a beginner in DVB-T, and I would like to buy a DVB-T PCI Card to
set up a MythTV in my Linux PC.
>> I have tried to search the archive and google for a week, but I still
cannot come to a final deci
erical order of the links in the
relevent rc?.d directory or change the
"# Required-Start:" line within the script then use chkconfig to reorder the
scripts.
HTH
David
_______
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org
h well. Is there any hard way to do it then? ;-)
Thanks
David
_______
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I was just wondering if there was an easy way to extend a recording timeslot
while recording?
Example, recording something say after a football match which goes into
extra time; how do you set mythtv to keep recording for longer so you get
all of the (delayed) show?
Thanks
David
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
From:
Kevin Cossaboon
Home MAC Mini Computer
http://www.cossaboon.net
[EMAIL PROTECTED]
___
mythtv-users mailing list
Kevin
--
Looking for affordable webhosting? http://www.sitecity.net
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
From:
Kevin Cossaboon
Home MAC Mini Computer
http
Home MAC Mini Computer
http://www.cossaboon.net
[EMAIL PROTECTED]
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
my Mac Mini (not MythTV), and the range is good. 2 indoor walls and 15 feet or one outside wall and 15 feet no problem. Use it to control iTunes over the AirPort. From: Kevin Cossaboon Home MAC Mini Computer http://www.cossaboon.net [EMAIL PROTEC
]
wrote:
Try VNC
this might help you get started;
http://knoppmythwiki.org/index.php?page=x11vncHowTo
You run the server on the MythTV box, in the same X Session that
MythTV is running, then run a VNC Client on the Laptop (Clients are
available for almost every OS).
Umm... Wouldn't
filed.The following information may help to resolve the situation:The following packages have unmet dependencies: mythtv: Depends: mythtv-frontend (= 0.18.1-5) but it is not going to be installed Depends: mythtv-backend (= 0.18.1-5) but it is not going to be installedE: Broken
Try VNC
this might help you get started;
http://knoppmythwiki.org/index.php?page=x11vncHowTo
You run the server on the MythTV box, in the same X Session that
MythTV is running, then run a VNC Client on the Laptop (Clients are
available for almost every OS).
When I get my WiFi Card for my
the IR to the Server in the basement. Works GREAT!I programed learning remotes to emulate the keys I needed for MythTV, and have them at the other TV around the house.The cable distribution is "A Two-Channel Modulator That Distributes A/V Sources to Local and Distant TVs";http://www
George
thank you, I do not get errors on the atp-get update anymore.
I do not get MYTHTV packages in the list though :(
debian-test:~# apt-get install mythtv
Reading Package Lists... Done
Building Dependency Tree... Done
E: Couldn't find package mythtv
this is my soources.list
# deb
tra.csh.rit.edu unstable/mythtv Sources [877B] Ign http://dijkstra.csh.rit.edu unstable/mythtv ReleaseFetched 877B in 15s (55B/s)Failed to fetch ftp://ftp.nerim.net/debian-marillat/dists/unstable/main/binary-i386/Packages.gz Unable to fetch file, server said 'Can't open /debia
physically fscking huge - wont for example fit in a pundit-R without
case modifications
Not 100% stable - crashes under ff/rew sometimes (ivtv v0.3.8/mythtv 18.1
fwiw. May be better with later versions)
No games
No boot msg's - If you care (I don't and have a serial console if I want
boot msg
Yann asked
>
> I am planning to build a MythTV system, and would like to
> install a NVidia grafic card for software decoding of the
> recorded shows.
>
> The newer cards almost always have active coolers (with fan).
> Does software decoding use the "heat produci
I get consistent poor quality tv playback on my new mythtv frontend.
These problems are twofold. First, the quality is just crummy, with
horizontal lines as if it was getting poor reception off the air. The
second is that there are a lot of decoding glitches, like areas of picture
not
tering the channel number fine, and the recording works GREAT.
is there a spot to see logs on what crashes?
From:
Kevin Cossaboon
Home MAC Mini Computer
http://www.cossaboon.net
[EMAIL PROTECTED]
_______
mythtv-users mailing list
my
on how to trouble shoot the video issues?
From:
Kevin Cossaboon
Home MAC Mini Computer
http://www.cossaboon.net
[EMAIL PROTECTED]
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv
Anaconda to barf if you choose too much. I excluded as much
KDE and Gnome stuff as I could and was fine. I use fluxbox as my window
manager which is much more lightweight.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
e Anaconda
installer. I put the FC4 distribution on a local machine and made it
available via FTP from that machine. Everything went smoothly. After some
twiddling with my new Linux Xbox for awhile I then did a 'yum install
mythtv-suite'. The fr
> Thanks. Very interesting, does MythGame work?
> AJM,.
I have no experience with MythGame but I don't see why it would not work.
Something kind of ironic about running an emulated Pacman game on an Xbox.
I like it.
___
mythtv-users m
>> This may not be a useful solution for everyone interested in running a
>> MythTV frontend on an xbox, but . . .
>>
>> Using the info and downloads at this site,
>> http://www.not404.com/cgi-bin/trac.fcgi/wiki/XFedora4, I was able to
>> effortlessly install
This may not be a useful solution for everyone interested in running a
MythTV frontend on an xbox, but . . .
Using the info and downloads at this site,
http://www.not404.com/cgi-bin/trac.fcgi/wiki/XFedora4, I was able to
effortlessly install Fedora Core 4 on my xbox. Then using Jarod's
exce
rowing the gauntlet down.
I will pledge $10 towards a pot to reward someone/some team that
makes it possible to export mythtv recordings to the new video ipod in
3 months time. (Let's say 1/31/2006). That way when I get one of
these for Christmas, my MythTV will be all ready for it. :)
What do
10:31 AMTo:
'Discussion about mythtv'; 'Message-ID:'Subject: RE: [mythtv-users]
Need suggestion for Frontend only fanless
I have an HD 1000, it is my
understanding that the only difference between the HD1000 and HD1500 is that the
1500 comes with additional software for di
...
Would it also need new Freeview boxes and/or PCI cards?
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Gackstatter
Sent: Thursday, October 06, 2005 2:38 PM
To: 'Discussion about mythtv'
Subject: RE: [mythtv-users] Need suggestion for Frontend only fanless
solution
I run MythRoku on a Roku Photobridge HD. What is there is easy to install
and works great. MythRoku can use some more work but
ber 07, 2005 10:23 AMTo:
'Discussion about mythtv'Subject: RE: [mythtv-users] Need suggestion
for Frontend only fanless solution
After reading all this
about the mini-mac and then someone talking about water cooled I am convinced I
made the right decision to go with the Roku HD100
ue.changed the mount to be the whole /myth directory and nothing. From: Kevin Cossaboon Home MAC Mini Computer http://www.cossaboon.net [EMAIL PROTECTED] _______
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
, which VOIP providers are you utilizing? You can
answer off-list if you'd like.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I've been happily using MythTV for almost two years and had never paid any
attention to CallerID on MythTV since I didn't want to pay SBC an extra $7 (or
more) per month for CallerID.
BUT, when I moved, I signed up for SunRocket (www.sunrocket.com), and now have
CallerID.
I tho
:[EMAIL PROTECTED] On Behalf Of Tom Lichti
Sent: Monday, September 26, 2005 10:57 AM
To: Discussion about mythtv
Subject: Re: [mythtv-users] vga to component converters
Jason Temple wrote:
> Greetings All,
>I was wondering what most of you HD guys use to connect your front
> end to your tv.
Hi-
We are trying to build a MythTV box. We're experienced enough with
Linux in general, but we have zero experience with Myth, PVR, Linux
Video, etc. Our first hurdle is buying the tuner. In any case we only
want to deal with stuff that has a good compatiblity track record, so
cture chopped
> off on the right side. I only see the problem during 16:9 video
> playback. I have Myth configured to use the same video mode for the GUI
> and for playback, so it isn't that either.
Are you definitely running your desktop in the same 16:9 mode?
Do you have any other modelines defined?
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
hat's causing
> this. Does anybody have any ideas?
Different video cards sit the screen in slightly different places, it's
just a fact of life. You'll need to tinker with the modeline in the
XF86Config-4 file, just take it slowly.
__
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
to pass
along the idea.
-
Todd
_______
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>> Celeron 400, 700 Mhz , 64, 128 RAM , geforce mx4 ?
>> Any suggestion?
>> ___________
>
>___
>mythtv-users mailing list
>mythtv-users@mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
_______
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
base dump I quoted and the second...
> What I did was edit the xmltvid field for each scanned DVB
> channel in mythtv-setup. That should do the trick.
Ah, thanks very much - I've done that and it seems to work fine
now. I also trimmed the *.xmltv file for my RadioTimes video
source so i
I wonder if someone could suggest what might be going wrong with
my setup? Any suggestions would be very much appreciated.
I'm using the the latest version of MythTV from the
release-0-18-fixes branch and the RadioTimes XMLTV feed for the
UK with tv_grab_uk_rt from the Debian package of
.
If I start a front end on the backend machine, there is a guide.
is there a simple thing that I missed?
From:
Kevin Cossaboon
Home MAC Mini Computer
http://www.cossaboon.net
[EMAIL PROTECTED]
___
mythtv-users mailing list
mythtv-users
AllI have been play Knopix version of MythTV and have a backend/frontend server up with an old ATI TV Wonder VE. I also have a Frontend (almost only) for viewing. I have lots of little issueschronicled at http://www.cossaboon.net So before I sink much more time into this is the following a
I just picked up one from here:
http://www.irblaster.info
Works great and $15 shipped.
- Todd
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
left/right and see if that helps.
Finally, a booster may well help, but isn't guaranteed.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
1 - 100 of 333 matches
Mail list logo