>> -Original Message-
>> From: Steve Shipway [mailto:s.ship...@auckland.ac.nz]
>> Sent: Tuesday, January 26, 2010 3:03 AM
>> To: ncc...@gmail.com; nagios-users@lists.sourceforge.net
>> Subject: Re: [Nagios-users] Virtual Machines - define as parent or
ashost
>> dependency...
>>
>> This i
Yes, there are different ways lately, snmp vs WBEM and python,... I
believe both require esx not esxi (not sure about the latter, no service
console so not sure how you'd install this?) and I believe both require
the "HP Management Agents" - you should be able to find them here for
your 460c g5 bla
>> -Original Message-
>> From: raja nagios [mailto:nagios.r...@gmail.com]
>> Sent: Tuesday, February 02, 2010 9:54 AM
>> To: Nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] Nagios
>>
>> Hi all,
>>
>> Look at the attached snapshot of nagios.
>>
>> why i am getting ? mark.
>> -Original Message-
>> From: Tarak Mukherjee [mailto:reachta...@hotmail.com]
>> Sent: Tuesday, February 09, 2010 8:06 AM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] User Authentication using LDAP in Nagios
>>
>> Dear Friends,
>>
>> Is there any way to Authenti
>> -Original Message-
>> From: Stuart Browne [mailto:stuart.bro...@ausregistry.com.au]
>> Sent: Monday, February 22, 2010 5:46 PM
>> To: nagios-users@lists.sourceforge.net
>> Subject: Re: [Nagios-users] check_disk question Nagios
>>
>> > From: Ennis Ibarra [mailto:en...@nmcourts.gov]
>>
>From what I can see, the perms shouldn't be a big problem , mine are all
owned by nagios:nagios -
if you remove the .htaccess auth parts, can you get in and view the
CGI's normally?
what do your Apache error and access logs say?
Hth
Cheers,
jamie
>> -Original Message-
>> From: Rober
>> -Original Message-
>> From: Jatin Davey [mailto:jasho...@cisco.com]
>> Sent: Thursday, March 25, 2010 8:46 AM
>> To: Nagios Mailinglist
>> Subject: [Nagios-users] PHP GD Extension not available -- PNP4Nagios
>>
>> Hi
>>
>> I installed PNP4nagios and everything went fine. No errors we
> >-Original Message-
> >From: Ryan C Ash [mailto:ryan.c.ash.l...@statefarm.com]
> >Sent: Thursday, July 08, 2010 10:01 AM
> >To: Nagios users
> >Subject: [Nagios-users] Running Nagios on Vmware
> >
> >Is anyone aware of documentation or test cases showing whether or not
running
> >Nagios
From: olourkin-nag...@yahoo.com [mailto:olourkin-nag...@yahoo.com]
Sent: Tuesday, October 05, 2010 12:20 PM
To: Nagios Users List
Subject: [Nagios-users] Monitoring an EMC Celerra
Hi all -
Been digging around to try to figure out how to enable SNMP gets against an EMC
Celerra so that I can im
definitions within Nagios, rather than having to learn the
Celerra config, and then having to poke the guy who does maintain them
until he gets them set properly.
May not work out that way, but I'm at least going to give it a shot.
Cheers,
Erik
- Original Message
From: James Pratt
From: Ceylan, Hasan [mailto:hasan.cey...@dowjones.com]
Sent: Thursday, October 07, 2010 1:04 PM
To: 'nagios-users@lists.sourceforge.net'
Subject: Re: [Nagios-users] installing and configuring nagios
Hello:
I am very new to Nagios, I would like to know what exactly it does. What
version is bet
Hi, while I cannot answer your question directly, I would advise giving these
SNMP replacement plugins a look, as they simplified things considerably here,
and are quite reliable IMO...
http://nagios.manubulon.com/
Cheers,
James
From: Роман Обрядин [mailto:obryadi...@gmail.com]
Sent: Monday
you could try these instead of check_snmp , i always found check_snmp to
be too limited... :\
http://nagios.manubulon.com
From: Jorge Arenas [mailto:jorge...@hotmail.com]
Sent: Thursday, December 16, 2010 9:16 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] check_snmp
-Original Message-
From: Luc MAIGNAN [mailto:luc.maig...@winxpert.com]
Sent: Tuesday, December 21, 2010 10:36 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Email Notifications
Hi,
I wonder if it is possible to have email notifications but JUST for a
specified list
2010 11:02 AM
To: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Email Notifications
I wasn't enough clear, I think.
Today I have all notifications to one user.
I don't want to change this.
But for only a list a specified services, I want to notify another user
Le 2
hi, you mention you are using HP's management agents on ESX - if so,
check out these SNMP plugins to replace check_snmp -
http://nagios.manubulon.com/
I'm not sure if you can get any SMART drive status from snmpd/HP, but
you can check RAID status on local disks, and there are also ways to
check
You would have to know what OS you are on , and have a look at the
configure.in file for the plugins, as that is how the CPU info is
obtained ... (Just checked the source code, as I was curious about that
as well)...
check_load.c ---
if (take_into_account_cpus == 1) {
To clarify-
1. Mail notification via Nagios is is configured in your Nagios
configuration files, no SMTP info is necessary - Nagios expects a
working local SMTP relay for such configurations to actually work.
2. Your nagios server can indeed be set up to relay mail to a specific
SMTP serve
Just as a side note, I fully agree with you on the plugins at
manubulon.com, they are supreme replacements/substitutes for the
check_snmp plugin.
Also, you can indeed query windows boxes with SNMP if you are like me
and have too many systems for agents etc, you just need to have the
windows SNMPD
Perhaps he just wanted to check it out for the nagios core configuration gui ,
as i am doing today... OTOH, i can see xi being a very nice product for
folks/sites who do not want to hassle with maintaining/setting up all the free
stuff... (although, I personally do not think it's worth the $, at
Hi - Can you elaborate? I understand you added pnp4nagios to your Gentoo box...
but... what ssi files, what pop-ups? I would read through the INSTALL file,
and/or manual/docs on the version of pnp4nagios for your specific ebuild -
There could be some small manual configuration bits you may have
Hi, there is an archived thread about a similar request; it should help get you
fixed up -
http://www.mail-archive.com/nagios-users@lists.sourceforge.net/msg24221.html
Regards,
Jamie
From: Nair [mailto:vman...@rediffmail.com]
Sent: Friday, March 25, 2011 12:19 PM
To: nagios-users@lists.sourcef
Hi. Sorry it's not working for you - from below, i am deducing you have it
setup to check every 2 minutes, from 11am-5pm, only on Mondays. Is this correct?
Can you post your host definition, and maybe the command template for
template_TEST/TEST_CMD, as I'm not sure why it's not recurring afte
I believe it's actually a Perl/regex issue, see here, maybe you can escape the
* and have it work -
http://www.google.com/search?q=quantifier+follows+nothing+before+HERE+mark+in+regex
cheers,
Jamie
---
From: Edwin Zoeller [mailto:edwin.zoel...@ama-assn.org]
Sent: Tuesday, April 05, 2011 9:2
yes, i just upgraded our install as well , so i went through a bit of
hair pulling myself. I am using sync mode, and found the best tool for
setup was the verify_pnp script, it finally got me sorted out...
From: Jeremiah D. Jester [mailto:jj...@u.washington.edu]
Sent: Thursday, April 14, 2011
Hello, have you tried running them as the nagios user, or as root user
or both?
Sometimes it will not execute the same as nagios user, so you can test
using su - nagios -c "/usr/local/nagios/libexec/check_cmd -H " etc etc...
Also, this may help -
http://support.nagios.com/knowledgebas
Hi, starting simple here - have you setup and configured the NSClient on
the windows box you are querying?
>From -
http://nagiosplugins.org/man/check_nt
This plugin collects data from the NSClient service running on a
Windows NT/2000/XP/2003 server.
From: Manish Kumar [mailto:ma
Hi, unfortunately that is not enough info for anyone here to work from -
Try viewing *all* the "received by" headers of the final email, and
discern where the time lag is occurring. It sounds like a sendmail queue
issue (or whatever MTA's you are using), then fix the offending mail
server/relay cau
The help for the plugin says -
./check_dns --help
check_dns v1.4.15 (nagios-plugins 1.4.15)
Copyright (c) 1999 Ethan Galstad
Copyright (c) 2000-2008 Nagios Plugin Development Team
This plugin uses the nslookup program to obtain the IP address for the given
host/domain query.
An option
> -Original Message-
> From: Satish Patel [mailto:sat...@linuxbug.org]
> Sent: Wednesday, March 04, 2009 8:02 PM
> To: nagios Users Mailinglist
> Subject: [Nagios-users] ESX server monitroing
>
> anyone using SNMP base ESX monitoring with nagios, i have tried few
plugins but i
> want advan
> -Original Message-
> From: alexus [mailto:ale...@gmail.com]
> Sent: Friday, March 06, 2009 2:08 PM
> To: nagios-user Mailinglist
> Subject: [Nagios-users] ../include/config.h:315:18: error: ltdl.h: No
suchfile or
> directory
>
> r...@lama /usr/local/src/nagios-3.0.6 586$ ./configure
>
> -Original Message-
> From: syed jafar [mailto:syed_ja...@hotmail.com]
> Sent: Friday, March 06, 2009 2:16 PM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] Nagios Plugin question
>
> I am installing Nagios 1.4.1 plugin on a Solaris 10 box and when I
run make or mak
> -Original Message-
> From: Anirudh Srinivasan [mailto:srianir...@gmail.com]
> Sent: Tuesday, March 24, 2009 11:18 AM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] Nagios with snmp
>
> Hey Folks,
>
> I want to test a Switch to be monitored using snmp plugin in nagi
> -Original Message-
> From: Christopher McAtackney [mailto:crist...@gmail.com]
> Sent: Thursday, April 09, 2009 8:59 AM
> To: Nagios Users
> Subject: [Nagios-users] Centreon
>
> Hi all,
>
> Does anyone have any experience using Centreon?
http://www.centreon.com/
>
> It seems like a re
> -Original Message-
> From: Michael McCoy [mailto:mmc...@cedarville.edu]
> Sent: Thursday, April 09, 2009 12:21 PM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] NRPE_NT Checks on Mapped Network Drive
>
> For off let me say this is my first mailing list, so I'm new a
> -Original Message-
> From: Anirudh Srinivasan [mailto:srianir...@gmail.com]
> Sent: Friday, April 10, 2009 3:16 PM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] upgrading nagios
>
> has anyone done upgrage from 2.x to 3.x
> the previous guy who has installed 2.8 h
Hi - sounds like your issue is that the generic make install in nagios
src tries to drop a file called nagios.conf into httpd's (usually the
default) location, /etc/httpd/conf.d/, which, appears does not exist on
your server...
If you can find what directory your apache uses for "/etc/httpd/conf.d
> -Original Message-
> From: lance raymond [mailto:lraym...@weatherflow.com]
> Sent: Monday, April 20, 2009 3:42 PM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] check_snmp_storage plugin - 126 return code
>
> Not sure what's wrong, seems simple enough. I am using t
It appears there are more than one:
http://www.nagiosexchange.org/cgi-bin/search.cgi?query=postfix&Go=Go
hth
jamie
> -Original Message-
> From: Kenneth Holter [mailto:kenneho@gmail.com]
> Sent: Wednesday, April 22, 2009 10:22 AM
> To: nagios-users@lists.sourceforge.net
> Subject: [Na
l 22, 2009 10:57 AM
> To: nagios-users@lists.sourceforge.net
> Subject: Re: [Nagios-users] Monitor Postfix with Nagios 3
>
> Thanks for you reply.
>
> When I click the links I get this message "project_id is required!".
> What's that all about? I'm new
> -Original Message-
> From: Kevin Keane [mailto:subscript...@kkeane.com]
> Sent: Thursday, April 23, 2009 1:23 PM
> Cc: nagios-users@lists.sourceforge.net
> Subject: Re: [Nagios-users] Multiple host service detail on one page
>
> Klaus Umbach wrote:
> > On 23/04/09 09:50, Nick Millen wr
> -Original Message-
> From: Roy Sigurd Karlsbakk [mailto:r...@karlsbakk.net]
> Sent: Monday, April 27, 2009 10:03 AM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] What are the reasons to use NRPE?
>
> Hi all
>
> I just wonder what the reasons are to use NRPE in fav
Hi Lance,
I could be wrong, but I think most use either nagiosgraph or pnp4nagios
http://www.pnp4nagios.org/pnp/start for graphing w/rrdtool... (I'm
getting there someday, cacti works for now, let us know how it goes
though!)
Cheers!
jamie
> -Original Message-
> From: lance raymond [mail
-Original Message-
From: Karen Tsai [mailto:hyt...@stanford.edu]
Sent: Monday, May 11, 2009 6:05 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Required RPMs for Nagios 2.5
Hi,
We are running Nagios 2.5 on Linux x86. We would like to get a list
of RPMs required for
-Original Message-
From: Martyn [mailto:mar...@chetnet.co.uk]
Sent: Tuesday, May 12, 2009 11:31 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Mail help needed
I have found a provider that will convert Email to Voice but they use
$START$ and $END$ for their system to
-Original Message-
From: venu_vustipa...@readersdigest.com
[mailto:venu_vustipa...@readersdigest.com]
Sent: Wednesday, May 13, 2009 4:33 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Upgrade from 1.3 version to 3+
Anyone please let me know what is the best way to pr
-Original Message-
From: Pete Forde [mailto:pete.fo...@aardman.com]
Sent: Friday, May 15, 2009 5:58 AM
To: Nagios-users@lists.sourceforge.net
Subject: [Nagios-users] 404 error
Hi
I am trying to test Nagios software, so thought I would install on my
laptop running Fedora 10. All se
http://nagios.manubulon.com/
-Original Message-
From: Melanie Pfefer [mailto:melanie_pfe...@yahoo.co.uk]
Sent: Monday, May 18, 2009 11:15 AM
To: frank.bourd...@dga.defense.gouv.fr
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] RE [spam?] memory on windows
maybe I w
I absolutely agree with Frank - you can *really* mess up an RPM-based
distro by using CPAN if you are not VERY careful what you do, so do so
at your own risk! :\
(if you *must* use packages required by CPAN - instead, try and figure
out how to add 3rd party repos such as rpmforge etc, as there is
Hmm.. is "RamDisk" a mount point on a *nix machine, or ?
-Original Message-
From: Melanie Pfefer [mailto:melanie_pfe...@yahoo.co.uk]
Sent: Wednesday, May 20, 2009 8:38 AM
To: James Pratt
Cc: nagios-users@lists.sourceforge.net
Subject: RE: [Nagios-users] RE [spam?] memory
h would
explain the "ERROR")
Thanks,
James
-----Original Message-
From: James Pratt
Sent: Wednesday, May 20, 2009 8:40 AM
To: 'Melanie Pfefer'
Cc: nagios-users@lists.sourceforge.net
Subject: RE: [Nagios-users] RE [spam?] memory on windows
Hmm.. is "RamDisk" a mount
nagi0s -m "Physical Memory" -w 80% -c
90%
OK : Physical Memory: 8%used(695MB/8190MB) : < 80 % | 'Physical
Memory'=695MB;6551;7370;0;8189
Hth, regards,
james
-Original Message-
From: James Pratt [mailto:jpr...@norwich.edu]
Sent: Wednesday, May 20, 2009 8:45 AM
To: Me
Seems there is a new resource for this since "The Fork"...
http://www.monitoringexchange.org/cgi-bin/page.cgi?d=1
hth,
regards
Jamie
-Original Message-
From: Andrew Davis [mailto:ncc...@gmail.com]
Sent: Wednesday, May 20, 2009 1:19 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nag
uot;There is no limit to what a man can accomplish
if he doesn't care who gets the credit." - Ronald Reagan
James Pratt wrote:
Seems there is a new resource for this since "The Fork"...
http://www.monitoringexchange.org/cgi-bin/page.cgi?d=1
esn't care who gets the credit." - Ronald Reagan
James Pratt wrote:
Apologies - that site is really acting strange lately.
I used to use this one, but it requires HP hardware, and since
we are
mostly a vmware shop, it's no good to me anymore -
Hi,
This may help you, or possibly the developer:
http://www.iphonedevsdk.com/forum/iphone-sdk-development/5423-nsurlerror
domain-bad-server-certificate.html
hth,
cheers,
James
-Original Message-
From: Denny Schierz [mailto:linuxm...@4lin.net]
Sent: Tuesday, June 02, 2009 7:12 AM
To:
-Original Message-
From: Rick Garland [mailto:rick.garl...@quantum.com]
Sent: Wednesday, June 03, 2009 11:16 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] monitoring F5
Got some additional information. These are F5 BigIP load balancers.
Does this help or is more inf
Hi, if the answer below is not applicable, please check out the nagios config
file named "cgi.cfg" - it has options to allow your users to see/do what you
specify only.
Hth,
Cheers,
Jamie
-Original Message-
From: MAD [mailto:sri.lu...@free.fr]
Sent: Wednesday, June 10, 2009 9:31 AM
To
-Original Message-
From: Brian O'Mahony [mailto:brian.omah...@curamsoftware.com]
Sent: Thursday, June 18, 2009 6:49 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Restarting the Nagios server from the webpage
Is this possible to do rather than logging in via ssh, and
Hi Tom, I've tried to answer your questions to the best of my own
personal knowledge -I have replaced any of your original "*" symbols
with my own on all my comments/thoughts below, since my MS outlook
client apparently just sucks, so this appears more readable.
Regards,
jamie
-Original Mess
Hello Natalie.
The reason you may not be able to execute these is likely due to permissions..
try a chmod 755 on these files so it changes the perm bits from
-r-xr-x---
To
-rwxr-xr-x
(Otherwise, only the nagios user has access to execute them)...
As for your SNMP issue, try using :
yum se
st
Subject: Re: [Nagios-users] Plugin problem
Permissions are correct, do not change them! Other users than nagios
shouldn't be allowed to execute the plugins.
and from the output, the shell is root, so don't care about execute
rights.
James Pratt wrote the following on 13.07.2009 18
>> -Original Message-
>> From: Esteban Torres Rodriguez [mailto:etor...@dap.es]
>> Sent: Monday, July 27, 2009 8:46 AM
>> To: Nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] Update 3.0 to 3.1.2
>>
>> how to update versión?
>>
>> I have nagios on RHEL 5.1 with install from
>> -Original Message-
>> From: Matthew Tice [mailto:mjt...@gmail.com]
>> Sent: Monday, July 27, 2009 10:29 PM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] Static linked libraries
>>
>> Hello, I'd like to compile Nagios and the Nagios plugins with static
linked lib
>> -Original Message-
>> From: James Pratt [mailto:jpr...@norwich.edu]
>> Sent: Monday, July 27, 2009 10:41 PM
>> To: Matthew Tice; nagios-users@lists.sourceforge.net
>> Subject: Re: [Nagios-users] Static linked libraries
>>
>>
>>
>
>> -Original Message-
>> From: keshav murthy [mailto:nkesha...@gmail.com]
>> Sent: Tuesday, August 04, 2009 6:36 AM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] My apache is slow
>>
>> Hi guys,
>>
>> I have Nagios 3.0.6 running on RHEL 4. Nagios by itself is runni
>> -Original Message-
>> From: Rich Smith [mailto:rich.sm...@queensu.ca]
>> Sent: Monday, August 17, 2009 10:49 AM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] Attempting to compile Nagios 3.1.2 on Solaris
10
>>
>> I'm trying to compile Nagios 3.1.2 on Solaris 10 S
>> -Original Message-
>> From: ranjith kumar [mailto:ranjithkodu...@yahoo.co.in]
>> Sent: Wednesday, September 02, 2009 11:40 AM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] www.ranjithkumar.com
>>
>> Please check this link www.ranjithkumar.com
>>
Super... But..
>> -Original Message-
>> From: Esteban Torres Rodriguez [mailto:etor...@dap.es]
>> Sent: Tuesday, September 08, 2009 8:38 AM
>> To: nagios-user Mailinglist
>> Subject: [Nagios-users] Nagios-plugins and nrpe for platform 64 bits
>>
>> That's packages are valid for platform 64 bits?
>>
>>
>> -Original Message-
>> From: Matt Baer [mailto:m...@baerconsult.com]
>> Sent: Tuesday, September 29, 2009 3:51 PM
>> To: Nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] Monitoring Open Ports
>>
>> Is there a way that Nagios can monitor open ports, even if there isn't
>>
>> -Original Message-
>> From: Kevin Holleran [mailto:kdaw...@gmail.com]
>> Sent: Wednesday, September 30, 2009 10:37 AM
>> To: nagios-users@lists.sourceforge.net
>> Subject: Re: [Nagios-users] Using Nagios to Scan a Network for Rogue
AP's
>>
>> On Wed, Sep 30, 2009 at 10:21 AM, Hari Sek
Well, look on the bright side - It's not that big of a perl script - you can
likely modify it to suit your specific need(s). :)
>> -Original Message-
>> From: Matt Baer [mailto:m...@baerconsult.com]
>> Sent: Monday, October 05, 2009 2:43 PM
>> To: nagios-users
>> Subject: Re: [Nagios-use
>> -Original Message-
>> From: Emily [mailto:new2nag...@gmail.com]
>> Sent: Tuesday, October 06, 2009 12:32 PM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] bgp monitoring (check_bgp_neighbors) command
>> syntaxassistance
>>
>> Hello, I am attempting to use this ch
>> -Original Message-
>> From: Eduardo Barreto [mailto:lec...@gmail.com]
>> Sent: Wednesday, October 28, 2009 11:44 AM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] JBOSS
>>
>> Hi All,
>>
>> How can I monitor a jboss server?
>>
>>
>> Thanks in advance.
>>
>> Ed
>> -Original Message-
>> From: jonas kellens [mailto:jonas.kell...@telenet.be]
>> Sent: Saturday, October 31, 2009 11:01 AM
>> To: Nagios-Users
>> Subject: [Nagios-users] MySQL-plugin : how to use it ??
>>
>> I have found the following Nagios plugin to monitor MySQL :
>>
>> bash-3.2# wg
>> -Original Message-
>> From: ReynierPM [mailto:rper...@uci.cu]
>> Sent: Tuesday, November 10, 2009 11:32 PM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] Problems checking external host
>>
>> Hi every:
>> I'm trying to check a external server using check_by_ssh c
>> -Original Message-
>> From: dave stern - e-mail.pluribus.unum [mailto:dit.d...@gmail.com]
>> Sent: Wednesday, November 11, 2009 10:49 AM
>> To: nagios List
>> Subject: [Nagios-users] read-only nagios
>>
>> We're looking for a mechanism to allow others access to our nagios
>> server fo
>> -Original Message-
>> From: ReynierPM [mailto:rper...@uci.cu]
>> Sent: Monday, November 16, 2009 9:45 AM
>> To: Morris, Patrick
>> Cc: nagios-users@lists.sourceforge.net
>> Subject: Re: [Nagios-users] Problems checking external host
>>
>> Morris, Patrick wrote:
>> > The part I'm fairl
>> -Original Message-
>> From: ReynierPM [mailto:rper...@uci.cu]
>> Sent: Monday, November 16, 2009 10:04 AM
>> To: James Pratt
>> Cc: nagios-users@lists.sourceforge.net
>> Subject: Re: [Nagios-users] Problems checking external host
>>
>>
>> -Original Message-
>> From: dOE [mailto:doep...@gmail.com]
>> Sent: Monday, December 07, 2009 12:13 PM
>> To: Nagios User-List
>> Subject: [Nagios-users] Nagios monitor for VMware ESXi (free edition)
>>
>> I have created a monitor using the "check_esxwbem.py", but it returns
an "OK" a
>> -Original Message-
>> From: C. Bensend [mailto:be...@bennyvision.com]
>> Sent: Monday, December 14, 2009 2:17 PM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] Anyone testing Microsoft Volume Shadow Copy?
>>
>>
>> Hey folks,
>>
>>I am hitting a situation wher
Sure, that should not be too difficult - google around for "Nagios wrapper" or
nagios-plugins to see some example wrapper/plugin scripts.
Here's one that monitors hdtemp I found real quick that should show you how it
works easy enough -
http://linsec.ca/blog/2008/02/09/hddtemp-wrapper-for-nagio
>> -Original Message-
>> From: xmanhosting [mailto:anth...@xmanhosting.com.au]
>> Sent: Thursday, January 07, 2010 11:57 PM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] check_sensors command
>>
>> Hello,
>>
>> Thanks for the replies Mark and James.
>>
>> How would
Hello Reynier,
Have a look at: http://nagios.sourceforge.net/docs/3_0/flapping.html
Hth - Jamie
>> -Original Message-
>> From: ReynierPM [mailto:rper...@uci.cu]
>> Sent: Tuesday, January 12, 2010 10:58 AM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] What this mes
>> -Original Message-
>> From: Mr Gabriel [mailto:gabr...@impactteachers.com]
>> Sent: Monday, January 18, 2010 8:09 AM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] check_hpjd issues
>>
>> I'm getting the following error for running
>>
>> # ./check_hpjd -H printe
HI. Did you pre-load or substitute all those variables into the
environment prior to running that, or did you just run exactly what's
below? (For example, if $CONTACTEMAIL$ var was empty/null, I would think
the command below would not work at all.. :\
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROT
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Wednesday, June 04, 2008 2:02 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Fwd: The results of your email commands
Hi,
I am trying to install nagios plugins on solaris spac 10. It was ab
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frank J. Gómez
Sent: Wednesday, June 04, 2008 4:12 PM
To: nagios-users
Subject: [Nagios-users] Debugging "CHECK_NRPE: Error - Could not completeSSL
handshake" errors
http://www.nagios.org/faqs/viewfaq.php?faq_id=191
I was having th
Hi. have you tried Dag's RHEL3 rpm's? ... Personally, I would just use
SNMP, as ESX doesn't like 3rd party agents/software, and neither does
vmware support... :\
Regards,
jamie
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lorand
S. D'Caltan
Sent: Wednesday, July 0
y rpm-5.0-0.2.0.el5.rf
>
> You see it gets a little bit irritating after a while. I'd really love to
> just be able to
> compile the NRPE from source, but then we're back at the original error which
> I was
> trying to correct.
>
> -Original Message-
&
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Stagiaire
Sent: Tuesday, July 15, 2008 10:16 AM
To: Nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Information for MIB
Hello,
I want to monitor waiters IBM, HP and DELL with Nagios and SNMP but I
don't manage to find the M
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Thierry Granier
> Sent: Tuesday, July 22, 2008 8:43 PM
> To: Nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] check_http
>
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> -Original Message-
> From: Thierry Granier [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, July 22, 2008 9:27 PM
> To: James Pratt
> Subject: Re: [Nagios-users] check_http
>
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
> > Many thanks but:
> 1) on na
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Michael
Egan
Sent: Thursday, July 24, 2008 4:01 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Display system time
Is there a way in Nagios to show the system time for each monitored
server?
Thanks,
Mike
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Melanie Pfefer
> Sent: Thursday, July 31, 2008 8:58 AM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] nagios3 installation
>
> Hello
>
> when I do ./configure, I hav
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Agnello George
> Sent: Wednesday, August 13, 2008 3:40 AM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] ./check_snmp_int Error reading table : (null)
>
> Hi
> I
From: Novin Jaiswal [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 11, 2008 2:22 PM
To: Paulus, Jake; nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Nagiosgraph is not working
/usr/local/nagiosgraph/insert.pl
"1226534492||stage8.ishisystems.com||AllCOMPONENT PEGCOUNT||138||"
From: Estevao Soares [mailto:[EMAIL PROTECTED]
Sent: Friday, November 14, 2008 1:28 PM
To: Guilherme Drago
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] How do I monitor a specific log message?
No, That didn't occur to me till now.
Ok, Lets suppose I mount my path on samb
Melanie, take a look at nagios-snmp plugins -
http://nagios.manubulon.com/
For example, the custom command in commands.cfg to check for snmpd
service on a windows box would be
define command{
command_name check_snmp_win
command_line $USER1$/check_snmp_win.pl -H $HOSTADDRESS$
com
> >-Original Message-
> >From: Chris St. Pierre [mailto:[EMAIL PROTECTED]
> >Sent: Thursday, December 11, 2008 10:18 AM
> >To: nagios-user Mailinglist
> >Subject: [Nagios-users] Nagios doesn't die when killed
> >
> >I recently upgraded to Nagios 3.0.5 on RHEL 5, and a problem that I
> >had
1 - 100 of 143 matches
Mail list logo
