May be you can look for wirewrap pins with bushings.
What offers Augat?
eric
-Original Message-
From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On
Behalf Of Jan Rychter
Sent: woensdag 7 mei 2014 11:39
To: neonixie-l@googlegroups.com
Subject: Re: [neonixie-l] Nixie
Hi Jan,
You can use this socket for tubes with 1mm diameter pins:
http://uk.farnell.com/harwin/h3161-01/socket-pcb-tin-knurled-1mm/dp/149318
it is not cheap, but works really well and it is easy to solder it.
There is 1.93 mounting hole in specs, but use 2mm hole for it, the
melted solder will ma
> For A-101's I use 0.093" crimp-style connector socket pins (they cost about
> $0.10 US from digikey, part #A14097-ND). After soldering wire to the
> crimp-pin, I cover with heat-shrink tubing. It's very solid. Also works for
> IN-1's, though I advise using a better tube.
On a related note, do
