Please help

Hi, Please help us for an issue observing in our application. SNMP version using : net-snmp-5.9.4 OpenSSL version : openssl-3.0.13 Our application supports * SNMP polling for version 1 , 2c and 3 and encryption SHA, MD5, AES, DES, * SNMP traps We are using more than 60 + devices to

Need help regarding writing AgentX for support SNMP V3 Which running with Apache 2.4 Service.

Hi All My C++ application running(on windows-64 bit application with Apache 2.4 (Daemon )and this application support only SNMP V1 V2 using net-snmp API our C++ application get snmp call (for SNMPGET,SNMP walk using Windows OS provided SNMP Service using ExtensionAgents C:\Windows\system32\snmp

Re: HELP - Net-SNMP AgentX - Problem with new MIB and snmpset

Simone Moni writes: >         if ($request_info->getMode() == MODE_GET) { >             # ... generally, you would calculate value from oid >             if ($oid == new > NetSNMP::OID(".1.3.6.1.4.1.193.37.10.11.64.10.1.2.0")) { >             $request->setValue(ASN_OCTET_STR, $default_SP); >    

HELP - Net-SNMP AgentX - Problem with new MIB and snmpset

Hi, Can anyone help me? I'm a newbie with AgentX. I need to extend snmpd with a new custom MIB module. I have NET-SNMP version 5.5 on Redhat, I would implement perl API, using NetSNMP::agent. Hereby, the steps I've done: - /etc/snmp/snmpd.conf #sec.name source

Re: Need help to "drop the response" for a request

Magnus Fromreide writes: > If the former then there is no support. Additionally, it would be in violation of the RFC which says a response must be sent when authentication has succeeded. Thus, if someone uses the correct community name or SNMPv3 credentials, they always deserve a response at le

Re: Need help to "drop the response" for a request

On Fri, Sep 18, 2020 at 04:39:21PM +0530, Sanjay Kumar wrote: > Hi Net-SNMP team, > Need help on below scenario: > We are handling the Error condition for the SNMP request(get/set) packet > with the below options in the *"subagent"* > &g

Need help to "drop the response" for a request

Hi Net-SNMP team, Need help on below scenario: We are handling the Error condition for the SNMP request(get/set) packet with the below options in the *"subagent"* netsnmp_request_set_error(request, SNMP_ERR_NOSUCHNAME); netsnmp_request_set_err

Re: Getting linker error for Net-snmp. Need help

On Wed, Feb 27, 2019 at 09:23:40AM +, kiran.nagar...@dellteam.com wrote: > Please let me know the fix for the same. Please let us know what you did before the make. How did you invoke configure? Did you run in a clean checkout? > # make > making all in /usr/pkg/src/net-snmp-5.8/snmplib > maki

Getting linker error for Net-snmp. Need help

Please let me know the fix for the same. # make making all in /usr/pkg/src/net-snmp-5.8/snmplib making all in /usr/pkg/src/net-snmp-5.8/agent making all in /usr/pkg/src/net-snmp-5.8/agent/helpers making all in /usr/pkg/src/net-snmp-5.8/agent/mibgroup /bin/sh ../libtool --mode=link gcc -g -O2 -DNET

Re: Need the Help for the SNMP alarms on 38282 .

On Thu, Oct 18, 2018 at 03:13:18PM +0530, Ravi Shanker K N via Net-snmp-coders wrote: > Hello Team , > > I need your support for one of the alarm . It will be great if anyone of > us can help me . > > We are receiving the snmp alarms as below in the F5(Load balancer) ,

Need the Help for the SNMP alarms on 38282 .

Hello Team , I need your support for one of the alarm . It will be great if anyone of us can help me . We are receiving the snmp alarms as below in the F5(Load balancer) , F5-BIGIP-LOCAL-MIB::ltmPoolMemberStatServerCurConns."/Common/MMP_DMZ_38282"."/Common/TPS2-HC-2103-DMZ-1

Re: IRC chat to help our new guard get on board?

net-snmp developers, Please join us for an IRC chat on #newguard at freenode.net on April 12 5:30 AM PDT/6:30 AM MDT/7:30 AM CDT/8:30 AM EDT/12:30 PM UTC for a meet-and-greet with ICEI's newguards who wants to contribute to the net-snmp project. Looking forward to chatting with you guys. Thanks,

Re: IRC chat to help our new guard get on board?

Keith Mendoza : > So far, this is the time that may work for everyone if we do it the > week of April 8 (UTC and US time zones): 5:30 AM PDT/6:30 AM MDT/7:30 > AM CDT/8:30 AM EDT/12:30 PM UTC--6:00 AM PDT/7:00 AM MDT/8:00 AM > CDT/9:00 AM EDT/1:00 PM UTC. > > Eric, > How do you feel about having t

Re: IRC chat to help our new guard get on board?

d direction of >> the project and feel like they know its key people. >> >> We'd like to set up a time for a short IRC conference for them to get >> to know your project's senior devs and vice-versa. Ian and Keith and I >> will be there, of course. We can talk ab

Re: IRC chat to help our new guard get on board?

there, of course. We can talk about what needs to be done and > recruit you some more help. > > We'd like to especially invite your project owner and release manager > and tech lead (understanding that those might be the same person) but > any net-snmp dev would be welcome and the mor

Re: IRC chat to help our new guard get on board?

On 04/03/18 20:16, Keith Mendoza wrote: Thank you for your interest. Please let us know when you're free; we will schedule the meeting based on what works best for the net-snmp devs who would like to join us. Hello Keith, This week 6 PM - 9 PM PDT works for me. Next week 6 AM - 7 AM MDT will

Re: IRC chat to help our new guard get on board?

your project's senior devs and vice-versa. Ian and Keith and I >> will be there, of course. We can talk about what needs to be done and >> recruit you some more help. >> >> We'd like to especially invite your project owner and release manager >> and tech le

Re: IRC chat to help our new guard get on board?

and I will be there, of course. We can talk about what needs to be done and recruit you some more help. We'd like to especially invite your project owner and release manager and tech lead (understanding that those might be the same person) but any net-snmp dev would be welcome and the m

IRC chat to help our new guard get on board?

alk about what needs to be done and recruit you some more help. We'd like to especially invite your project owner and release manager and tech lead (understanding that those might be the same person) but any net-snmp dev would be welcome and the more the better If you're willing to at

Re: ICEI asks what help you need

Bart Van Assche : > Thank you for reaching out. There is a huge backlog w.r.t. addressing bug > reports and the patch tracker. Help with reviewing and addressing all these > tickets would definitely be welcome. Wow. 722 open bugs. OK, we'll get on that. Expect

Re: ICEI asks what help you need

On 03/21/18 11:21, Ian Bruene wrote: On 03/20/2018 05:46 PM, Eric S. Raymond wrote: I've been asked to approach the net-snmp dev team on behalf of the Internet Civil Engneering Institute. ICEI tries to identify important infrastructure that is undermaintained and help out. What does

Re: ICEI asks what help you need

On 03/20/2018 05:46 PM, Eric S. Raymond wrote: I've been asked to approach the net-snmp dev team on behalf of the Internet Civil Engneering Institute. ICEI tries to identify important infrastructure that is undermaintained and help out. What does your project need? Where we can find a

ICEI asks what help you need

I've been asked to approach the net-snmp dev team on behalf of the Internet Civil Engneering Institute. ICEI tries to identify important infrastructure that is undermaintained and help out. What does your project need? Where we can find a match between your needs and the skills of our staf

Re: --help and -h don't provide the same ouput

> Dear reader, > > > > When using version 5.7.3 I noticed the following. > > > > When entering --help it shows: > > C:\WINDOWS\system32>snmpd --help > > Warning: no access control information configured. > > (Config search path: D:\Program Files

--help and -h don't provide the same ouput

Dear reader, When using version 5.7.3 I noticed the following. When entering --help it shows: C:\WINDOWS\system32>snmpd --help Warning: no access control information configured. (Config search path: D:\Program Files (x86)\nCipher\nfast\etc\snmp;D:\Program Files (x86)\nCipher\nf

Re: Help to get started to integrate an agent module

to add a scalar as described there. But I also see two >> options to add a Table. One is using mib2c and other is using the table of >> data stored within the agent example. Which one is preferred? Also the mib2c >> example requires some plumbing to build it as part of

Re: Help to get started to integrate an agent module

g mib2c and other is using the table of > data stored within the agent example. Which one is preferred? Also the mib2c > example requires some plumbing to build it as part of the agent code. Is > there any other document for this that I can refer? Your help is highly > appreciated as I am

Help to get started to integrate an agent module

example requires some plumbing to build it as part of the agent code. Is there any other document for this that I can refer? Your help is highly appreciated as I am afraid that I may be heading in the wrong direction. Thanks -- Murali Karicheri Linux Kernel, Keystone

Looking for help to fix error: "snmpwalk: Unknown engine ID"

-a MD5 -A "password for MD5User" -x DES -X "password for MD5User" -l authPriv But now getting error: snmpwalk: Unknown engine ID Can you please help me find what am I doing wrong and how I can correct it. I just need snmpwalk on that remote host, and won't mind using a

RE: Help porting net-snmp to an embedded platform

the meantime, thanks again MF -Original Message- From: NetSNMP Mailbox [mailto:net-snmp-m...@freesnmp.com] On Behalf Of Robert Story Sent: lunedì 25 aprile 2016 19:41 To: Moreno Floris Cc: net-snmp-coders@lists.sourceforge.net Subject: Re: Help porting net-snmp to an embedded platform On W

Re: Help porting net-snmp to an embedded platform

On Wed, 13 Apr 2016 08:53:51 + Moreno wrote: MF> first of all I'd like to make sure I'm writing in the correct MF> mailing list. The fact is I'm not developing an external MF> application nor am I improving net-snmp code in any way. You're in the right place. MF> At this stage, everything wor

Help porting net-snmp to an embedded platform

in this file the separation between the versions seems foggy and I'm not sure I can dispose of lcd_time that easily. I'm basically fumbling at this point. Thank you very much for your help MF -- Find and fi

Need help: AgentX callbacks not called

Hi! I need some help finding the missing link for my AgentX subagent: I made an agentX that registers successfully with the master agent, and it registers the MIB object. However for some reason, the master agent seems to know nothing about the MIB, and the provided callback function are not

Re: Need some Help to understand get_first and get_next methos calls.

On Wed, 15 Jul 2015 06:32:03 + Sofiya Parvin (Sofiya Parvin) wrote: SSP> Yes we are using Table Iterator helper to sort the data. SSP> SSP> Is any other Integrator is there to quick sort. The table_data helper uses sorted containers (and was written by the same person as the iterator helper,

Re: Need some Help to understand get_first and get_next methos calls.

On Mon, 13 Jul 2015 09:17:28 + Sofiya Parvin (Sofiya Parvin) > Thanks for the information can u please suggest us better way of > sorting large table data. You didn't answer my question about which helper you are using. If it is the iterator helper or the create-dataset helper, then you should

Re: Need some Help to understand get_first and get_next methos calls.

On Fri, 10 Jul 2015 05:27:56 + Sofiya Parvin (Sofiya Parvin) wrote: SSPP> Could you please help me. How snmptable command will internally SSPP> calling get_first and get_next method. What is the exact code flow. snmptable doesn't call get_first and get_next. Thos are part of

How can the community help with patches? (Was Re: [PATCH] Let Perl access the security engine ID)

understanding your reasoning and life in open source projects, we > are still bothered by our impatience... is there anything we can do to > help, to reduce the prospect of months to weeks? > One thing that would help me would be to include a test case in the patch or bug report - not just

Re: need help for generating ,C file from MIB file

to start by reading the MIB loading tutorial at: > > > >http://www.net-snmp.org/tutorial-5/commands/mib-options.html > > > > And making sure you can get snmptranslate to display information about > > your MIB node. Once snmptranslate works, then come back and try

please help just a minor query

i am compiling snmp-net on a linux module only with specific module , i want a snmpd disk for getting trap : can you please help which module should i include to have disk option : Also please give some steps to folllow . Sample : "CONFIGURE_OPTIONS+=--with-mib-modules=host/hr_system

need help for generating ,C file from MIB file

Hi, I have created a MIB file It is present at path : [gkasliwal@svl-junos-d072 /b/gkasliwal/14.2_ib_psd/src/junos/shared/mibs]$ ls | grep jnx-bgpmib jnx-bgpmib2.mib jnx-bgpmib3.mib jnx-bgpmib3_tc.mib I have kept all the mibs files at path : /homes/gkasliwal/.snmp/mibs As well. Now I am givin

Re: Need help loading and traversing MIBs

Den 14-05-2014 12:05, Odiee47 . skrev: > When trying to print_mib to file the program then fails. > > Any ideas what I did wrong here? Please elaborate "fails". How does it fail? How much did it write to test.txt? Did it even create the file (you should check the return value from fopen) When

Need help loading and traversing MIBs

Hi, I am trying to build an agent that could load specified MIBs and then query selected values. But when I try to print mib information via "print_mib" my application crashes. I'm using this code to load MIB netsnmp_init_mib(); read_all_mibs(); snmp_set_mib_warnings(2); //struct tree *tr = n

RE: Help Please

own time. Thanks, Srinivas Srinivasa Rao Katta(System Administrator), skatt...@hotmail.com, > Date: Thu, 20 Mar 2014 21:58:46 +0100 > From: h...@hlangeveld.nl > To: skatt...@hotmail.com > Subject: Re: Help Please > > Hi Srinivas, > > On Solaris, having an

Help Please

Hi SNMP Folks, Good Evening. This is Srinivas from Washington,DC. I have a ldom Solaris server and it has following interface on it and snmpwalk was giving interface was down information.But interface was UP and working good. Here is the interface information; --

Re: Help! Convert OCTET string to READABLE string

This is a limitation in the execute / pass / pass_persist infrastructure: the truncation happens when creating the output to send to the script. setPass() sets up the command string and the arguments into passthru->command, which is a statically allocated buffer. setPassPersist() has the same prob

Re: Help! Convert OCTET string to READABLE string

update" string is in file "/*update*/" (it's one line string). I also use "-d" as you suggest ,then i save log file in "*/SNMPSET_LOG/*" and what i got from snmpset in "/*Received_Log*/". Thank for your help! Nam. device_mode=1,0&de

Re: Help! Convert OCTET string to READABLE string

On Thu, Dec 05, 2013 at 06:04:22PM +0800, namgmail wrote: > Hi Niels, > > This is my full command: > > Sender: > update="a1 a1 a2 a3 ...a400 " #long string count from > a1 to a400 > snmpset -v1 -c private 192.168.4.113 *.1.3.6.1.4.1.5* > *s* "${update}" I would like

Re: Help! Convert OCTET string to READABLE string

Hi Niels, This is my full command: Sender: update="a1 a1 a2 a3 ...a400 " #long string count from a1 to a400 snmpset -v1 -c private 192.168.4.113 *.1.3.6.1.4.1.5* *s* "${update}" Receiver: +>Added 1 more line in '/'/etc/snmp/snmpd.conf/" *pass* *.1.

Re: Help! Convert OCTET string to READABLE string

Den 04-12-2013 07:09, namgmail skrev: > Now it work if i add "-Oa" or"-OT" in the snmpset command.I can see > readable string . > > But it shows only half of string not full string... Are you it isn't the agent that truncates the string? Try adding -d to the snmpset command to see the packets c

Re: Help! Convert OCTET string to READABLE string

On 12/4/2013 6:55 AM, Magnus Fromreide wrote: Hi Magnus Fromreide, Thank you so much for your valuable suggestions. Now it work if i add "-Oa" or"-OT" in the snmpset command.I can see readable string . But it shows only half of string not full string... Thanks, Have a nice working day! Nam.

Re: Help! Convert OCTET string to READABLE string

On Tue, 2013-12-03 at 10:22 +0800, namgmail wrote: > Hi pro, > > I have a problem with SNMPSET ,this is my command: > > snmpset -v1 -c private > 192.168.x.x.1.3.6.1.4.1.426.8.1.20.5.1.1 s > > > If it's short string it work fine but with long string it automatic > convert to

Help! Convert OCTET string to READABLE string

Hi pro, I have a problem with SNMPSET ,this is my command: snmpset -v1 -c private 192.168.x.x .1.3.6.1.4.1.426.8.1.20.5.1.1 *s * If it's short string it work fine but with long string it automatic convert to *octet* string.Here is what i got from receiver: -s .1.3.6.1.4.1.

Re: Help Please

Den 03-09-2013 20:29, Srinivasa Rao Katta skrev: Now,/usr/local/sbin/snmpd was running fine on the server and it was build by V5-7 patch and it was not showing hard disk zfs volumes on net-snmp server. It was showing cpu,memory and swap and nics except zfs file systems. Good. So, it just does

Re: Help Please

Den 29-08-2013 00:40, Srinivasa Rao Katta skrev: > Gone to net-snmp web site and downloaded the following source tar ball; > > net-snmp_V5-7-patches_snapshot_20130828_0403.tar.gz > > I have extracted the net-snmp_V5-7-patches_snapshot_20130828_0403.tar > under my existing net-snmp-5.7.2 source roo

Re: Help Please

On Fri, Aug 23, 2013 at 12:50:14PM -0400, Srinivasa Rao Katta wrote: > Niels, > > Thanks for the information. > > I run the "/usr/local/sbin/snmpd -Dall" on the cmd line prompt and Please > find attached /var/log/snmpd.log for output. > > I set the following 64 bit lib path before to run the

HELP Net-SNMP with C++

Hey guys, I need some help to develop a C++ Code to track a network, and i'm not have success to associate the net-snmp library with the netbeans. -- Introducing Performance Central, a new site from SourceForg

Re: Help Please

Den 23-08-2013 00:01, Srinivasa Rao Katta skrev: > > Niels, > > Thanks for the information. > > Please find attached text file,Which has gdb information. > > Please let me know,If You have any questions or concerns. I sure have concerns about the fact that gdb does not work on that system :-( Tha

Re: Help Please

Den 22-08-2013 12:16, Srinivasa Rao Katta skrev: > As per your advise,I have compiled net-snmp 5.7.2 with "--with-cc="gcc > -m64" option and now I was not getting following error mesg in the > /var/log/snmpd.log file; [snip] > Here is the new /var/log/snmpd.log information; > > root@M5000

Re: Help Please

Den 21-08-2013 21:16, Srinivasa Rao Katta skrev: > File system /Zones3 was 3.0 TB size. > > Could you please let me know,How can I fix this problem. You should compile net-snmp as a 64-bit application when you have such large file systems. Try option "--with-cc="gcc -m64" to configure. > Net-snm

Help Please

Hi, Good Afternoon. I am hoping sending this information to one of the net-snmp developers. I have installed net-snmp 5.7.2 on Sparc Solaris 10 and I was seeing following error message in the /var/log/snmpd.log. File system /Zones3 was 3.0 TB size. Could you please let me know,Ho

Help about SNMP C API

Hello , I'm new to the protocol SNMP , and I want to develop a program with the snmp C API . The purpose of this program will be the creation of an agent SNMP and a private MIB for company . I read a lot from the website of net snmp net (http://www.net-snmp.org) Please I need help to

Help needed to a newbie

Hi there, I recently started out on working net snmp as an intern project for a company. I need some basic help and pointer that will help me get started and unblock me. I want to make a change to snmpd, such that any time a new GET (or GET NEXT or GET BULK) request comes, before invoking

need help to update values in mib2c.create-dataset.conf generated code

he only same data all the time.. How can I get this updating data ? where I am doing mistake? If it is possible with for(;;)loop where should I add it? Please help me. Thanks & Regards, Jatin /* * Note: this file originally auto-generated by mib2c using *

Need help for ipIfStatsTable

Hi, Need help related to ipIfStatsTable. I am using net-snmp 5.6.2 version, I looked at the data-access code for ipSystemStatsTable ( from files /proc/net/snmp or snmp6 and additional stats from /proc/net/netstat . ) I would like to implement ipIfStatsTable on LINUX ipv4. Can anyone help me

snmpd.conf: need help for trigger traps

Hello sir, In my snmpd.conf file following lines are generating a trap after 25 seconds, as the value of 1.3.6.1.2.1.6.3 = 12 notificationEvent tcpRtoMax.0 TCP-MIB::tcpRtoMax.0 1.3.6.1.2.1.6.3 monitor -u root -S -t -r 25 "Warn: High Disk Usage" -e tcpRtoMax.0 1.3.6.1.2.1.6.3 - - 9 11999

RE: mib2c-system information help

The compiler issues a warnning because you do not check the returnr value from the call to system. It does do the call. Maybe you should check the return values from system, fopen, fscanf! It might also help to specify to full path of the script that you call You cannot be sure what the PATH is

Re: mib2c-system information help

On Thu, Sep 06, 2012 at 10:30:47AM +0530, Jatin Bodarya wrote: >I want to add some system information with my enterprise OID. > Can anyone help me ? how can I do this? My mib2c generated code is not > allowing me to call the "system" function to run another

mib2c-system information help

Hello all, I want to add some system information with my enterprise OID. Can anyone help me ? how can I do this? My mib2c generated code is not allowing me to call the "system" function to run another program from it or " fscanf" function to read from the

snmp trap function help

Hell all, need help !! Below are my two functions for trap generation... Can anyone tell me how can I pass any external argument to this functions? I want to use some external values that I can send with trap..Help Me.. And can anyone tell me what these two arguements are useful for it

need Trap function help

Below there are two functions are given for generating traps, I want to pass an integer argument eg. "highCpuUsage" .so that I can send value of this variable in a trap.How can I pass such arguments in below send_highCpuUsage_trap function ? Thanks in advance, Jatin. void cpu() {

help

This should return "OBJECT-TYPE" As per my current understanding there is no direct NetSNMP API , which can help me in doing so. Can someone me please give me some tips on how to write these new API. Or some code snippet to which I can refer to. Regards, C

Need help related to ipIfStatsTable and enabling ipv6

Hi, I am using net-snmp 5.6.2 version on Linux system. Need information about ipIfStatsTable of IP-MIB. Earlier I posted a thread related to IP-MIB & UDP-MIB, some one told to see all the tables (including ipifStatsTable) we need to enable ipv6. I enabled ipv6 using ( --enable-ipv6 ) in the ./co

Fwd: Re: Help with creating a dymically loaded module

Oprindelig meddelelse Subject: Re: Help with creating a dymically loaded module Date: Mon, 18 Jun 2012 19:48:59 +0200 From: Niels Baggesen To: Cyrus Virus CC: net-snmp-coders@lists.sourceforge.net Den 13-06-2012 20:18, Cyrus Virus skrev: >> sudo snmpd

Re: Help with creating a dymically loaded module

Den 13-06-2012 20:18, Cyrus Virus skrev: >> sudo snmpd -f -L nstAgentPluginObject.so, dldmod You lost the -D when copying from the wiki, and added a significant blank ... % snmpd -f -L -DnstAgentPluginObject,dlmod /Niels -- Niels Baggesen -- @home -- Århus -- Denmark -- ni...@baggesen.net The

Re: Help with creating a dymically loaded module

On 13 June 2012 19:18, Cyrus Virus wrote: > I can compile the code using the make file, but when I try to run it I > get this error: > >> sudo snmpd -f -L nstAgentPluginObject.so, dldmod Where did you find that command? The instructions for loading the dynamic module in the tutorial you mentioned

Help with creating a dymically loaded module

Hi, I'm trying to create a dynmically loaded object for a course assignment. I have installed net-snmp on Ubuntu 10.04 32bit from the default repository and verfied that it has support for dynamic modules by running 'snmpd -H'. I'm using the exact code from this tutorial: http://www.net-snmp.org/w

Help with creating a dymically loaded module

Hi, I'm trying to create a dynmically loaded object for a course assignment. I have installed net-snmp on Ubuntu 10.04 32bit from the default repository and verfied that it has support for dynamic modules by running 'snmpd -H'. I'm using the exact code from this tutorial: http://www.net-snmp.org/w

Re: Re: help needed wrt net-snmp windows 64bit

On Wed, Feb 29, 2012 at 12:52 PM, Bart Van Assche wrote: > On Feb 29, Markus Gaugusch wrote: > > On Feb 29, Vijaya Simha Reddy Aedavelli > wrote: > > > I want to develop the snmp agent, using net-snmp on Windows 64bit > > > OS(Windows 7/8). Is this possible? > > > > > > I've seen Win32 is availa

Re: Re: help needed wrt net-snmp windows 64bit

On Feb 29, Markus Gaugusch wrote: > On Feb 29, Vijaya Simha Reddy Aedavelli wrote: > > I want to develop the snmp agent, using net-snmp on Windows 64bit > > OS(Windows 7/8). Is this possible? > > > > I've seen Win32 is available. What about 64bit? > > Just compile it yourself, there is some infor

Re: help needed wrt net-snmp windows 64bit

Just compile it yourself, there is some information in the list archives available. On Feb 29, Vijaya Simha Reddy Aedavelli wrote: > Hi, > > I want to develop the snmp agent, using net-snmp on Windows 64bit > OS(Windows 7/8). Is this possible? > > I've seen Win32 is available. What about 64bit?

help needed wrt net-snmp windows 64bit

Hi, I want to develop the snmp agent, using net-snmp on Windows 64bit OS(Windows 7/8). Is this possible? I've seen Win32 is available. What about 64bit? Thanks in advance. Regards Vijay -- Virtualization & Cloud Mana

Re: HELP

On 9 November 2011 05:03, Deepak MVK wrote: > I was successfully able to install net-snmp5.7.1 on my ubuntu laptop. > However when I try to read the version number using snmpget --version I am > getting this error: > snmpget: error while loading shared libraries: libnetsnmp.so.30: > c

HELP

Hi All, I was successfully able to install net-snmp5.7.1 on my ubuntu laptop. However when I try to read the version number using snmpget --version I am getting this error: snmpget: error while loading shared libraries: libnetsnmp.so.30: cannot open shared object file: No such file or dire

Re: Need help for engineBoots

checked the persistent file ,Where the engineBoots value SN> contains other than "1". SN> It will be great help some one will help us to reslove this issue. You don't have the agent configured to read the persistent file then. Make sure if you're modifying the configruation p

Need help for engineBoots

ecked the persistent file ,Where the engineBoots value contains other than "1". It will be great help some one will help us to reslove this issue. With Thanks and Regards, D.SenthilNathan Mobile No: +91 7299202990

RE: Help on the error: failed to create group entry

Wes, Thanks a lot for your explanations. Best Regards, Jing -Original Message- From: Wes Hardaker [mailto:harda...@users.sourceforge.net] Sent: 2011年6月17日 21:58 To: ZHAO Jing G Cc: Dave Shield; net-snmp-coders@lists.sourceforge.net Subject: Re: Help on the error: failed to create

Re: Help on the error: failed to create group entry

> On Mon, 13 Jun 2011 15:51:02 +0800, "ZHAO Jing G" > said: ZJG> So could you please confirm that 32 will be the max length? Yes, USM user names should not be longer than 32 characters. Or more correctly, it's not the USM that limits it, it's really the VACM. -- Wes Hardaker Please ma

RE: Help on the error: failed to create group entry

lease confirm that 32 will be the max length? Thanks a lot! Best Regards, Jing -Original Message- From: dave.shi...@googlemail.com [mailto:dave.shi...@googlemail.com] On Behalf Of Dave Shield Sent: 2011年6月13日 15:37 To: ZHAO Jing G Cc: net-snmp-coders@lists.sourceforge.net Subject: Re: Help o

Re: Help on the error: failed to create group entry

On 13 June 2011 06:48, ZHAO Jing G wrote: > It seems the problem comes about when I tried with a long security name: > >My security name is: sec_testuser_ hss01hssdhusahalcate Is there a space in that security name? That is likely to confuse the config parser. Try omitting the space. > is

Help on the error: failed to create group entry

Hello sir, I am working on configuring net-snmp: It seems the problem comes about when I tried with a long security name: My security name is: sec_testuser_ hss01hssdhusahalcate So my snmpd.conf is: #com2sec NAME SOURCE COMMUNITY com2sec sec_testuser_ hss01hssdhusahalcate 127.0.0.1 tes

Need help on v2 traps forwarding and setting agent-ip

Hello, Stéphan Hemmert Administrateur SI Service Ingénierie de la Surveillance DISFE/DPI/CDC/INS/INSID - Direction Informatique des Services Financiers et de l'Enseigne stephan.hemm...@labanquepostale.fr Tél : 04 73 23 81 56 Adr. postale : 5 rue des Clarisses - CS 30033 -67083 Strasbourg Afin

net-snmp help required!

Subject: Need net-snmp help! Can't properly unload a shared object (dlmodNextIndex not decrementing) This question refers to the Net-SNMP online tutorial entitled, "Writing a Dynamically Loadable Object": http://www.net-snmp.org/wiki/index.php/TUT:Writing_a_Dynamically_Loada

Re: Request help about how to use the dynamic tables

2011/1/6 Chen Figo : > You suggestion is very good, but it's different from our design.. Fair enough - if you insist on working in a non-standard way, and don't feel able to provide the information that I've asked for, then I'm not really able to provide any assistance. > The expected result

RE: Request help about how to use the dynamic tables

Hi Dave, Thank you very much for you help. You suggestion is very good, but it's different from our design.. Here's the expected behavior and some example code of our program: 1. Parse configuration files and generate several SNMP tables according to the configuration. After th

Re: Request help about how to use the dynamic tables

2011/1/6 Chen Figo : > Because we have multiple customer, and they want have different mib > definition, "Different MIB definitions" implies you are talking about different management information, so you would presumably need different code to retrieve that underlying data anyway. Jumping thro

Re: Request help about how to use the dynamic tables

> > Because we have multiple customer, and they want have different mib > definition, so we want to make a application that can handle this kind of > request. If we use the common mode, we need to create specific code for each > of them. > In some ways, I feel this works against what the IANA (Int

RE: Request help about how to use the dynamic tables

ks! Best Regards, Chen Fei -Original Message- From: dave.shi...@googlemail.com [mailto:dave.shi...@googlemail.com] On Behalf Of Dave Shield Sent: 2011年1月5日 20:10 To: Chen Figo Cc: net-snmp-coders@lists.sourceforge.net; Bachmann Marcel; Mele Giovanni; Derouault Jacky Subject: Re: Request help

Re: Request help about the

On Wed, Jan 5, 2011 at 5:40 PM, Dave Shield wrote: > 2011/1/5 Chen Figo : > > we want to implement a interface that can handler the dynamic snmp > > tables which is automatic created. > > But why are you using dynamic tables? > It stumps me as well. The way I understand things, snmp was created

Re: Request help about the

2011/1/5 Chen Figo : > we want to implement a interface that can handler the dynamic snmp > tables which is automatic created. But why are you using dynamic tables? That's the aspect which is alien to the nature of SNMP. What is the underlying problem that you're trying to solve? Dave

RE: Request help about the

Hi Dave, Thank you very much for your help! In fact, we want to implement a interface that can handler the dynamic snmp tables which is automatic created. It means that we need to register the snmp mib handler to snmp agent without using the mib2c tools, but just analyse the dynamic mib files

  1   2   3   4   5   6   7   >