Dear Mr.Dave
As part of general traps is concerned I was able to
implement successfully
now the clarification I need is can I keep traps as
part of table ?
I want to create Traps for 4
Interfaces which will have 6 traps each
so I want to make a table for traps seperatly and
do
so i
Dear all: I am Clement. I have a problem about mib2c. my version is net-snmp 5.3.1, and when I try to translate netSnmpExamples(from NET-SNMP-EXAMPLES-MIB) into .c and .h , the error message is showen as following:
..not having a "valid OID". so , i modified the related OID, such like i
Dear Dave: The approach is still not work. My system indeed have a problem of time setting. Do there exist any good way to make "make " work? thanks a lot
Best Regards,Clement HsuMessage: 1Date: Thu, 12 Oct 2006 12:51:03 +0100From: "Dave Shield" <[EMAIL PROTECTED]>Subject: Re: About Install
On 02/10/06, James Mckenzie <[EMAIL PROTECTED]> wrote:
Note: If I do not provide a valid user name with the noauth parameter, the
monitor line
fails requesting that I provide a user name with the agentSecName parameter,
and I
have definitely added one.
As you may have noticed on the lists, I'
Dave:
I implemented a) as mentioned below and it works very well. Now to configure
the receiver to process the trap as sent and to generate the appropriate alarms.
Thank you for your assistance and a second set of 'eyes'.
The requirement for a space between the boolean operator and the varia
On 29/09/06, Helen McManus <[EMAIL PROTECTED]> wrote:
It seems that the "monitor" directive *has* to have -u SECNAME
supplied, even though according to the docs you only need to use
-u if you want to use a different name than that specified by
iquerySecName.
Ok - I've managed to track down
On 12/10/06, James Mckenzie <[EMAIL PROTECTED]> wrote:
> This will only send out a Trap when the event fails, is that correct.
With a Boolean Trigger monitor, then yes.
This will send a mteTriggerFired notification whenever the monitored
condition moves from false to true.
> What I also need i
David:
I see that spacing is very important. Putting a space between the != and the 0
fixed this. This will only send out a Trap when the event fails, is that
correct. What I also need is a notification when the triggering event is
corrected.
James Mckenzie
-Original Message-
>From
On 11/10/06, James Mckenzie <[EMAIL PROTECTED]> wrote:
> >Also try running "snmpwalk ... extTable" while this is running, so we
> >can see what these values actually are in between the various probes
> >of the DisMan monitor.
> >
> Done. Files attached.
A couple of things that I noticed from your
Thanks !!!
Concerning my problem, I'm not sure that the deadlock arises between a
read(get...) and the send trap using the same socket.
Indeed, I reproduce the same behaviour of deadlock with a sample which is
"only" sending traps massively (no get/getbulk/walk... are executed)
my code :
int
Hello all:
I have just compiled and install net-snmp 5.3.1 on AIX 5.2.
Compiler is gcc .
I have executed /usr/local/sbin/snmpd -r -d /usr/local /share/snmp/snmpd.conf
When I execute snmpwalk -v 2c -c public 127.0.0.1 in the first time ,it works well.But when I run it again,there is no respon
On 12/10/06, Arnaud BODENAN <[EMAIL PROTECTED]> wrote:
Sure, I understand that.
I just try to figure out how difficult it would be to implement it myself.
OK - I give in.
Please see the attached patch.
Warning - this is *COMPLETELY* untested.
I haven't even checked to see that it compiles - le
Sure, I understand that.
I just try to figure out how difficult it would be to implement it myself.
>From: "Dave Shield" <[EMAIL PROTECTED]>
>To: "Arnaud BODENAN" <[EMAIL PROTECTED]>
>CC: net-snmp-users@lists.sourceforge.net
>Subject: Re: My process is blocked while sendin a trap
>Date: Thu, 12
On 12/10/06, Clement Hsu <[EMAIL PROTECTED]> wrote:
> /home/tung/net-snmp-5.4.pre3# ./config.status
> config.status: creating Makefile
[snip]
> config.status: executing default commands
OK so far.
> # ls -ltrd conf* stamp* Make* include/net-snmp/net-snmp* libtool ltmain.h
> -rw-r--r--
On 12/10/06, Clement Hsu <[EMAIL PROTECTED]> wrote:
> Dear Dave:
> sorry, I didn't put the whole message: the whole message is following
[snip]
> config.status: creating include/net-snmp/net- snmp-config.h
> config.status: include/net-snmp/net-snmp-config.h is unchanged
>
> and then i p
Dear Dave: sorry, I didn't put the whole message: the whole message is following config.status: creating Makefile config.status: creating snmplib/Makefile config.status: creating apps/Makefile
config.status: creating apps/snmpnetstat/Makefile config.status: creating agent/Makefile config
On 11/10/06, Arnaud BODENAN <[EMAIL PROTECTED]> wrote:
> Concerning the two sessions:
> - they would be created in the same thread?
> - or there would be one thread managing the session for get/set...,
>and one thread managing traps?
I don't know - this idea is at a very early stage.
As I've a
On 12/10/06, Clement Hsu <[EMAIL PROTECTED]> wrote:
# ls -ltrd conf* stamp* Make* include/net-snmp/net-snmp*
[selective snip]
> -rw-r--r--1 274 halt11979 Oct 10 2005 Makefile.rules
> -rw-r--r--1 274 halt 3208 May 28 05:17 Makefile.top
> -rw
On 12/10/06, Chih-Tung Hsu <[EMAIL PROTECTED]> wrote:
> When I install net-snmp in xscale system (ps: environment
> is montavista) and using the instruction
> " ./configure –enable-embedded-perl –enable-share "
>
> When I make, the result is following:
[snip]
> snmp_perl.c:88:2: #error embe
Chih-Tung Hsu wrote:
> snmp_perl.c:88:2: #error embedded perl broken
Can you please retry with 5.4.pre3 and let us know what it tells you
wrt. embedded perl? It should have a much better perl [problem]
detection at configure time and will hopefully help you to nail down the
problem.
+Thomas
--
Dear Dave:I am clement, sorry, since my last mail account have some problems , so i change my account. the problem of make is still exist, and the message representing as follow after i conduct your instruction:
running config.status because the following file(s) changed: config.status co
21 matches
Mail list logo
