RS> IPV6-MIB::ipv6IfStatsTable = No Such Object available on this agent
RS> at this OID
I'm afraid the agent doesn't have code that implements this table... Sorry.
--
Wes Hardaker
Sparta, Inc.
-
This SF.Net email is sponso
Thanks Wes. So the question is which IPV6'MIBs has been implemented in part of
snmpd when we configure it with --enable--ipv6??
I couldn't get any IPV6'MIB in IP-MIB.txt or IPV6-MIB.txt working?
Regards,
Reza
--- On Tue, 12/2/08, Wes Hardaker <[EMAIL PROTECTED]> wrote:
From: Wes Hardaker <[E
Hi,
I am using NET-SNMP version 5.4.2.1 with the following configuration
file:
doDebugging 1
debugTokens read_config
showMibErrors 0
mibWarningLevel 0
I then issue the following command:
snmpget -c public 10.80.24.81 NDS-DTH3-MUX::muxBitRate.1
I get the following output
trace: read_config(): re
Did you walk the device and grep -i for ipv6?
~BAS
On Tue, 2 Dec 2008, Reza Salehi wrote:
Thanks Wes. So the question is which IPV6'MIBs has been implemented in part of
snmpd when we configure it with --enable--ipv6??
I couldn't get any IPV6'MIB in IP-MIB.txt or IPV6-MIB.txt working?
Reg
> From: Alexander Bubnov [mailto:[EMAIL PROTECTED]
> Sent: Monday, December 01, 2008 11:07 PM
> I guess snmpd informs subagnet about shutdown, is that my
> fault. Otherwise I cannot see differences between breaking
> Ethernet cable and killing the process.
Pulling the ethernet cable p
> On Tue, 2 Dec 2008 08:51:09 -0800 (PST), Reza Salehi <[EMAIL PROTECTED]>
> said:
RS> Thanks Wes. So the question is which IPV6'MIBs has been implemented
RS> in part of snmpd when we configure it with --enable--ipv6??
Well, do realize that the --enable-ipv6 flag turns on the apps being
Mike Ayers schreef:
>> From: Jan Houtsma [mailto:[EMAIL PROTECTED]
>> Sent: Monday, December 01, 2008 12:19 PM
>>
>
>
>> Ok, However it is a fedora 10 rpm package. So i guess Fedora should
>> rebuild, test and release it again?
>>
>
> That may be the case, yes. Or it may be tha
I used the following flag:
--with-transport="UDPIPv6 TCPIPv6" --with-modules=mibII/ipv6" to
along with -- enable-ipv6
I cant still see any IPV6'MIB implementation.
I build snmpd on different machine and copy it over to my target machine to
test.
I only copy snmpd executable file ..Do I ne
I can see ipv6 address for 3 interfaces(eth0,eth1,ath0) on my
machines(/proc/net/if_inet6 shows that)..
Reza
--- On Tue, 12/2/08, Brian A. Seklecki <[EMAIL PROTECTED]> wrote:
From: Brian A. Seklecki <[EMAIL PROTECTED]>
Subject: Re: IPV6 support
To: "Reza Salehi" <[EMAIL PROTECTED]>
Cc: "
Please always reply to the list, thanks.
> From: Ragnar Moller [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, December 02, 2008 9:46 AM
> Thanks for your response to my, perhaps vague response.
>
> I have yet to understand much about SNMP and MIB's it seems.
>
> You are saying "One of th
I know it has been going many E-mails back and forth regarding the IPV6
support and I appreciate your help and support.However I couldn't get a
clear answer on this.
My question is : Does snmpd (5.2.1) agent support any IPV6'MIB implementation
if we compile it with the following flag:
--with
Hi All,
I need lm_sensor support from net_snmp.
I am running net-snmp 5.4.2 on linux FC4 machine.
How can I configure snmpd to support lm-sensors?Isn't it part of snmpd by
default?
I can retrieve temperature using >>sensors -f
I can see libsensors.so.3 in
/usr/lib directory
I would start by rolling your binaries on the same system you were
running, unless you can verify that the MD5 sum of all 5000k files on your
Linux boxes match, then you're playing with fire.
There has never been, in the history of GNU/Linux, two identical systems.
:)
Secondly, we're still
will do.Thanks Brian for your time and support.
Regards,
Reza
--- On Tue, 12/2/08, Brian A. Seklecki <[EMAIL PROTECTED]> wrote:
From: Brian A. Seklecki <[EMAIL PROTECTED]>
Subject: Re: IPV6 support
To: "Reza Salehi" <[EMAIL PROTECTED]>
Cc: "Wes Hardaker" <[EMAIL PROTECTED]>, "SNMP FORUM"
Dat
NetBSD/i386 RELENG_4 with Net-SNMP 5.4.2.1:
Also, like IPv4, NetBSD was the reference platform where IPv6 was
originally developed, so milage is is likely to vary in favor of you and
IPv6 on that platform, especially when it comes to kernel data structures.
~BAS--
Reza:
There is definatly something fucking wrong with the IPv6 MIB support in
the RHEL4 version of Net-SNMP (5.1.x).
Of course, the entire platform is fucking Bitrot Extradorinare(R). Its
amazing that people like me actually pay for it, including myself.
Anyway, compare the following:
-
Thanks Brian. Finally I could get it working and got the same result as yours.
I should copy all libraries over to make it working.
Anyhow as you mentioned there are some serious issues in IPV6 MIB
implementation(like not seeing the ipv6 address) .Hopefully net-snmp committee
can address this iss
I am new to snmp and net-snmp and am trying to go through tutorials to
set up an snmp agent
I configured the agent but am not able to start snmpd. When I run the
following command, it does not seem to do anything and continues to run
forever unless I explicitly kill the snmpd process
[EMA
It looks like the snmp agent is not starting because of the following
error which I see in the debug logs
.
verbose:udpEndpointTable:udpEndpointTable_container_init: called
verbose:socket:buffer: Original server send buffer is 111616
verbose:socket:buffer: New server send buffer size i
Hi
switch to root user and then try to start from there.
I think this will help.
You can start simply by giving #snmpd -c /usr/local/share/snmp/snmpd.conf
This will start your agent in 161 port by default.
On 12/3/08, Mitul Sen (misen) <[EMAIL PROTECTED]> wrote:
>
> It looks like the snmp agen
Dear all :
I'm using NET-SNMP version: 5.3.1 with an centos 5.2.
when I try the following request :
snmpwalk -v2c -c public localhost
I get the following result :
Timeout: No Response from localhost
What's the problem ? How can I to solve the problem ?
Regards ,
Vicky
-
21 matches
Mail list logo
