On 08/04/2008, Joan Landry <[EMAIL PROTECTED]> wrote:
> I have searched for documentation on net-snmp to find out how to configure
> net-snmp so that I can send v3 informs
> Specifically I want to be able to configure via the etc/snmp/snmpd.conf the
> following:
> 1. create an snmpNotifyTable entr
@lists.sourceforge.net
Subject: Re: V3 Informs
On 08/04/2008, Joan Landry <[EMAIL PROTECTED]> wrote:
> I have searched for documentation on net-snmp to find out how to
> configure net-snmp so that I can send v3 informs
> Specifically I want to be able to configure via the
> etc/s
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On
> Behalf Of Joan Landry
> Sent: Wednesday, April 09, 2008 1:33 PM
> Is there a place where I could find these kind of commands documented?
http://www.net-snmp.org/docs/man/snmpd.conf.html
HTH,
Mike
On 09/04/2008, Joan Landry <[EMAIL PROTECTED]> wrote:
> Yes that worked - thanks.
> Is there a place where I could find these kind of commands documented?
snmptrap(1) and snmpcmd(1)
"trapsess" is basically the admin/destination aspects of the snmptrap command,
embedded within the agent.
On 19 May 2010 01:04, Joan Landry wrote:
> I would like to know if there is a way to configure net-snmp via
> snmpd.conf to correctly send traps or informs
See the section of snmpd.conf(5) entitled "Notification Handling".
In particular, SNMPv3 notifications are configured using "trapsess".
You'l
: dave.shi...@googlemail.com [mailto:dave.shi...@googlemail.com] On
Behalf Of Dave Shield
Sent: Wednesday, May 19, 2010 3:59 AM
To: Joan Landry
Cc: net-snmp-users@lists.sourceforge.net
Subject: Re: v3 informs - snmpd.conf
On 19 May 2010 01:04, Joan Landry
wrote:
> I would like to know if there is a way
> From: Joan Landry [mailto:joan.lan...@overturenetworks.com]
> Am I missing something?
Reviewing
http://www.net-snmp.org/tutorial/tutorial-5/commands/snmptrap-v3.html
I notice "The difference is that SNMPv3 TRAPs use the engineID of the
local application sending the trap rather than the engin
Thanks - I had not configured the receiving station correctly.
Thanks - for the help!!!
-Original Message-
From: Ron Rader [mailto:ron.ra...@cipheroptics.com]
Sent: Wednesday, May 19, 2010 5:56 PM
To: Joan Landry
Cc: net-snmp-users@lists.sourceforge.net
Subject: RE: v3 informs
-
From: Ron Rader [mailto:ron.ra...@cipheroptics.com]
Sent: Wednesday, May 19, 2010 5:56 PM
To: Joan Landry
Cc: net-snmp-users@lists.sourceforge.net
Subject: RE: v3 informs - snmpd.conf
> From: Joan Landry [mailto:joan.lan...@overturenetworks.com]
> Am I missing something?
Reviewing
On 19 May 2010 21:50, Joan Landry wrote:
> I have used a v2 trap2sink in the past and so I know the basic trap
> mechanism works in my system.
Note that community-based traps are a *lot* simpler to work with than
SNMPv3 notifications. Ron has already pointed you to the relevant
tutorial page. I
> From: Joan Landry [mailto:joan.lan...@overturenetworks.com]
> I am now able to send v3 traps - but not able to send
> Do I need to specify in the engineid of the remote management station
if
> I am sending and inform?
> http://www.net-snmp.org/tutorial/tutorial-5/commands/snmptrap-v3.html
"
On 20 May 2010 16:46, Ron Rader wrote:
> If you wish to use
> INFORMs instead of TRAPs, your agent needs to include the remote
> target's engineID.
That's strictly accurate, but slightly misleading.
SNMPv3 requests will always include _some_ engine ID.
Which en
> From: Dave Shield [mailto:d.t.shi...@liverpool.ac.uk]
> > If you wish to use
> > INFORMs instead of TRAPs, your agent needs to include the remote
> > target's engineID.
>
> That's strictly accurate, but slightly misleading.
Does the tutorial need updating?
-Original Message-
From: dave.shi...@googlemail.com [mailto:dave.shi...@googlemail.com] On Behalf
Of Dave Shield
Sent: Friday, May 21, 2010 3:50 AM
To: Joan Landry; Ron Rader
Cc: net-snmp-users@lists.sourceforge.net
Subject: Re: v3 informs - snmpd.conf
On 20 May 2010 16:46, Ron Rader
14 matches
Mail list logo