Yes, you are right, I just thought there may be a way to do it cleanly,
you know, like showing up in the boot up messages... BTW: is this behaviour
supposed to be like that or do we have a bug here? Did really nobody have this
same problem?
Thanks, Lee
There may be a better way, but, you could
My MDK8.1 have informed me that may ehternet card (pcmcia) is an
Asix
AX88190 Fast Ehternet card. I have MDK installed on toshiba
notebook.
After going to Asix Corp web site I got the linux driver for it. The package
consists on 2 scripts, readme.txt, pcnet_cs.c (C source file) and
Hi all,
I have this small problem. I have a Micronet 10Mbps pcmcia ethernet card. It
got recognized during installation. But now, it doesn't get the card module
connected to eth0. If I do ifup eth0, then all is well. I just would like
to have the card initialized correctly at boot time instead of
Hello again.
First of all, thanks to everyone that helped me out earlier. Everyone has
been a great help.
I'm now entering the world of PCMCIA eithernet cards. I have a Linksys
EtherFast 10/100 PC Card. I'm using a Toshiba Satellite Pro 430CDT Laptop.
The instructions for the card say
Hi --
I had a similar problem, also a Linksys card (although a different one) and a Toshiba
Satellite (again a different one) and largely
solved it. The secret was to make sure PCMCIA was loaded. Once it was, the system
recognized the card as a PCMCIA
network card -- not as the driver that
, 2000 5:39 PM
Subject: Re: [newbie] pcmcia ethernet card
I also have an ect2 from linksys. It works great and always has. It is a
NE2000 Compatible.
This makes me think that your problem might be your pcmcia services. Do
you
have any other cards working?
"Welcome to the revolution&q
seeing ne2000 somewhere in my
computer.
-Original Message-
From: Jon Hunter [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Monday, March 20, 2000 5:39 PM
Subject: Re: [newbie] pcmcia ethernet card
I also have an ect2 from linksys. It works great and always has
, March 21, 2000 9:18 AM
Subject: Re: [newbie] pcmcia ethernet card
I know that I am not Jon but just thought of giving my two cents.
try typing 'setup' and go to 'System Services'
then hunt for [ ]pcmcia.
hello writes:
Hi Jon
I'm very new to Linux and Thank you for your help. What
I also have an ect2 from linksys. It works great and always has. It is a
NE2000 Compatible.
This makes me think that your problem might be your pcmcia services. Do you
have any other cards working?
Below is my setup
Toshiba 315CDS
Linksys Ect2
Xircom modem
Bios is setup for Controller Mode
Hi All Howz id goin?
I am having trouble getting my linksys ec2t pcmcia combo card working
under mandrake 7.0 If anyone could give me any advice I would be most
grateful. My computer is a compaq presario 1230 laptop (SUCKS)
Someone on this list mentioned using "ranish partition manager" to
10 matches
Mail list logo
