My SO5.2 printer options does not include raw Postscript. It only has
Generic Printer. Is this what you recommend?
I have an HP870Cxi defined to CUPS and Generic Printer using /usr/bin/xpp
which works ok. The test page prints very slowly (almost 2 minutes) on a
printer rated at 4 color
My SO5.2 printer options does not include raw Postscript. It only has
Generic Printer. Is this what you recommend?
I have an HP870Cxi defined to CUPS and Generic Printer using xpp which
works ok. The test page prints very slowly (almost 2 minutes) on a printer
rated at 4 color pages per
On Monday 10 September 2001 3:35, Geof Steichen wrote:
My SO5.2 printer options does not include raw Postscript. It only has
Generic Printer. Is this what you recommend?
I have an HP870Cxi defined to CUPS and Generic Printer using /usr/bin/xpp
which works ok. The test page prints very
I just got a new Espon 777 printer. I cannot get it to print in Staroffice.
I've run spadmin, but it does not have printer for the 777. I tried the 700
driver, but it makes everything twice as tall on the paper. And to make it
worse, now I cannot get anything to print out. I seem to have
On Sun, 9 Sep 2001 19:37:58 -0500, Linus Drouhard [EMAIL PROTECTED] wrote:
I just got a new Espon 777 printer. I cannot get it to print in Staroffice.
I've run spadmin, but it does not have printer for the 777. I tried the 700
driver, but it makes everything twice as tall on the paper.
: Re: [newbie] Printer setup on 8.0
Date: Wed, 6 Jun 2001 21:40:07 -0700
From: Alan Shoemaker [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Tom wrote:
Nope.. haven't gotten any replies yet... Don't think I got
any CUPS errors, just not letting me type ANYTHING at all
in those spaces
I've just installed LM8.0 and when I go to the printer setup, and choose
network printer, and go to the next screen that wants the printer name, etc,
it won't let me type anything in the blank spaces so I can tell it WHERE the
printer is.
Has anyone run into this problem?
Thanks,
Tom
setup on 8.0
have you gotten any replies on this? No one seems to know alot about
network printing under CUPS. Frustrating. Let me know if you get any
answers and I will do the same.
Wendell Gragg
From: Tom [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [newbie] Printer setup on 8.0
: [newbie] Printer setup on 8.0
have you gotten any replies on this? No one seems to
know alot about network printing under CUPS.
Frustrating. Let me know if you get any answers and I
will do the same.
Wendell Gragg
From: Tom [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject
Where can I change my Printer/Options in KDE???
**
Hebein, Gunther Cyrill
Cand. Pharm.
Innsbruck - Austria
**
begin:vcard
n:Hebein;Gunther
fn:Gunther C. Hebein
tel;pager:secret!
tel;cell:(43)-0699-10615108
tel;home:(43)-0512-292574
Are you using SAMBA?? If the connection is there SAMBA should take care of
it easily.
-Original Message-
From: Papa [SMTP:[EMAIL PROTECTED]]
Sent: Friday, February 25, 2000 12:11 AM
To: [EMAIL PROTECTED]
Subject: [newbie] Printer setup
Hi folks,
I'm having problems
Papa wrote:
Hi folks,
I'm having problems getting a remote printer to work from my Linux Box. I can ping
the Win98SE box both by IP Address and hostname. However, when I set those items
up in printtool it does not even appear to access the hub to get to the Win98SE
box. Here are some
Hi folks,
I'm having problems getting a remote printer to work from my Linux Box. I can ping
the Win98SE box both by IP Address and hostname. However, when I set those items
up in printtool it does not even appear to access the hub to get to the Win98SE
box. Here are some specifics:
The
Hi,
I can't set up my printer, an HP DeskJet 870Cxi. It was working ok
after the initial installation of Mandrake 5.3 under kernel 2.0.36.
I've since compiled 2.2.6, and I can't get my printer to work.
printtool detects no printer. I've tried compiling parallel port and
printer support into
On Thu, Apr 29, 1999 at 04:57:41PM -0700, Hidong Kim wrote:
Hi,
I can't set up my printer, an HP DeskJet 870Cxi. It was working ok
after the initial installation of Mandrake 5.3 under kernel 2.0.36.
I've since compiled 2.2.6, and I can't get my printer to work.
printtool detects no
15 matches
Mail list logo
