I have been pulling my hair out the last few days. Here is the setup:
Server running MDK 10.0. Printer is a HP OfficeJet K60. This works fine
when printing locally. Firewall is allowing all traffic. /etc/hosts.allow
is ALL:ALL. CUPS and SAMBA are running.
Computer A - Laptop running MDK
AL wrote:
Hi!
I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not
recognised by it. I have tried all the nearest settings available
offered by printool to no avail.
Any help greatly appreciated
Thanks!
ALI have a KX-P4420 (laser) and it runs perfectly (and
has
Hi,
I'll give that a try. My Panasonic is a dot matrix :-(
Alan Shoemaker wrote:
ALI have a KX-P4420 (laser) and it runs perfectly (and
has done so since I started using Linux with RedHat 5.2) when
I set it up as a HP Laserjet (the earliest, simplest one).
Extrapolating that info,
AL wrote:
Hi!
I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not
recognised by it. I have tried all the nearest settings available
offered by printool to no avail.
Any help greatly appreciated
Thanks!
Your printer does not seem to be on the HCL,
Mark Weaver wrote:
AL wrote:
Hi!
I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not
recognised by it. I have tried all the nearest settings available
offered by printool to no avail.
Any help greatly appreciated
Thanks!
Your printer does not seem to be on
John Rye wrote:
AL wrote:
Hi!
I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not
recognised by it. I have tried all the nearest settings available
offered by printool to no avail.
Any help greatly appreciated
Thanks!
As I recall, the KXP1150 is a
I don't recall seeing them, but then I wasn't looking for them. Follow
the link back and check to see if they're there.
Mark
John Rye wrote:
Mark Weaver wrote:
AL wrote:
Hi!
I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not
recognised by it. I have tried all the
AL:
Have you tried emulation? According to the Panasonic site
(.pansonic.com), your printer can pretend that it is either an Epson
FX-850 or an IBM Proprinter X24E.
HTH -
- cmg
AL wrote:
Hi!
I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not
recognised by it. I have
Hi!
I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not
recognised by it. I have tried all the nearest settings available
offered by printool to no avail.
Any help greatly appreciated
Thanks!
I have the Deskjet 600 hooked-up to mandrake 7.02
I tried to print a website's CGI page contents'...
and for some reason, the printer doesn't print out anything but
symbolsand won't stopjust keeps printing and
printing...etc...won't stop at all. How do I get it to stop...?
I've
Have HP Deskjet 600
can't get it to print in color under linux...why?
please someone must have it working under linux...correctly...
also installed StarOffice 5.1 just now...works great...
but don't have java support...how do I fix this?
printer won't print color in SO either
--
well...it printed both test pages fine (ascii, and postscript)
only the postscript was in color. but when I tried to print a
webpage in color, it only printed in B+W...what's the problem?
Michael Scottaline wrote:
KompuKit [EMAIL PROTECTED] wrote:
I have a HP deskjet 600...got it setup
I have the same printer and had the same problem. I used the printer 550UC
for configurating it and it now prints in color.
Dan
- Original Message -
From: "KompuKit" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, April 07, 2000 8:17 PM
Subject: Re: [[newbie] pr
Message -
From: "KompuKit" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, April 07, 2000 8:17 PM
Subject: Re: [[newbie] printer help]
well...it printed both test pages fine (ascii, and postscript)
only the postscript was in color. but when I tried to print a
webpag
I have a HP deskjet 600...got it setup under regular deskjet
it won't print in color...for some reason, why is this?
--
===KompuKit===
Kit Goins ICQ# 7110071
[EMAIL PROTECTED]Lowell, Mass.
Web Designer
I am still trying to find out how to get the printer icon on my KDE desktop
to work. I know you have to drag/ drop the text icon onto the printer icon.
My problem is that i can't get the lpr command which is linked to the
printer icon to work on my computer. I can print by opening the klpq
Warning
Could not process message with given Content-Type:
multipart/signed; boundary=zS7rBR6csb6tI2e1; micalg=pgp-sha1;protocol="application/pgp-signature"
Pankil Richards wrote:
Don Bonomini wrote:
...Is there like a print manager that i can cancell old
print jobs?
The easiest way (for me) is to unplug (and re-plug) the printer from the
electrical outlet completely. This will ensure any and all "garbage" in
it's memory to be erased.
18 matches
Mail list logo