[newbie] Printer Help

I have been pulling my hair out the last few days. Here is the setup: Server running MDK 10.0. Printer is a HP OfficeJet K60. This works fine when printing locally. Firewall is allowing all traffic. /etc/hosts.allow is ALL:ALL. CUPS and SAMBA are running. Computer A - Laptop running MDK

Re: [newbie] Printer Help

AL wrote: Hi! I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not recognised by it. I have tried all the nearest settings available offered by printool to no avail. Any help greatly appreciated Thanks! ALI have a KX-P4420 (laser) and it runs perfectly (and has

Re: [newbie] Printer Help

Hi, I'll give that a try. My Panasonic is a dot matrix :-( Alan Shoemaker wrote: ALI have a KX-P4420 (laser) and it runs perfectly (and has done so since I started using Linux with RedHat 5.2) when I set it up as a HP Laserjet (the earliest, simplest one). Extrapolating that info,

Re: [newbie] Printer Help

AL wrote: Hi! I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not recognised by it. I have tried all the nearest settings available offered by printool to no avail. Any help greatly appreciated Thanks! Your printer does not seem to be on the HCL,

Re: [newbie] Printer Help

Mark Weaver wrote: AL wrote: Hi! I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not recognised by it. I have tried all the nearest settings available offered by printool to no avail. Any help greatly appreciated Thanks! Your printer does not seem to be on

Re: [newbie] Printer Help

John Rye wrote: AL wrote: Hi! I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not recognised by it. I have tried all the nearest settings available offered by printool to no avail. Any help greatly appreciated Thanks! As I recall, the KXP1150 is a

Re: [newbie] Printer Help

I don't recall seeing them, but then I wasn't looking for them. Follow the link back and check to see if they're there. Mark John Rye wrote: Mark Weaver wrote: AL wrote: Hi! I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not recognised by it. I have tried all the

Re: [newbie] Printer Help

AL: Have you tried emulation? According to the Panasonic site (.pansonic.com), your printer can pretend that it is either an Epson FX-850 or an IBM Proprinter X24E. HTH - - cmg AL wrote: Hi! I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not recognised by it. I have

[newbie] Printer Help

Hi! I'm running Mandrake 7.1 and my Panasonic printer (KXP1150) is not recognised by it. I have tried all the nearest settings available offered by printool to no avail. Any help greatly appreciated Thanks!

[newbie] printer help

I have the Deskjet 600 hooked-up to mandrake 7.02 I tried to print a website's CGI page contents'... and for some reason, the printer doesn't print out anything but symbolsand won't stopjust keeps printing and printing...etc...won't stop at all. How do I get it to stop...? I've

[newbie] printer help

Have HP Deskjet 600 can't get it to print in color under linux...why? please someone must have it working under linux...correctly... also installed StarOffice 5.1 just now...works great... but don't have java support...how do I fix this? printer won't print color in SO either --

Re: [[newbie] printer help]

well...it printed both test pages fine (ascii, and postscript) only the postscript was in color. but when I tried to print a webpage in color, it only printed in B+W...what's the problem? Michael Scottaline wrote: KompuKit [EMAIL PROTECTED] wrote: I have a HP deskjet 600...got it setup

Re: [[newbie] printer help]

I have the same printer and had the same problem. I used the printer 550UC for configurating it and it now prints in color. Dan - Original Message - From: "KompuKit" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, April 07, 2000 8:17 PM Subject: Re: [[newbie] pr

Re: [[newbie] printer help]

Message - From: "KompuKit" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, April 07, 2000 8:17 PM Subject: Re: [[newbie] printer help] well...it printed both test pages fine (ascii, and postscript) only the postscript was in color. but when I tried to print a webpag

[newbie] printer help

I have a HP deskjet 600...got it setup under regular deskjet it won't print in color...for some reason, why is this? -- ===KompuKit=== Kit Goins ICQ# 7110071 [EMAIL PROTECTED]Lowell, Mass. Web Designer

[newbie] Printer Help!!!

I am still trying to find out how to get the printer icon on my KDE desktop to work. I know you have to drag/ drop the text icon onto the printer icon. My problem is that i can't get the lpr command which is linked to the printer icon to work on my computer. I can print by opening the klpq

Re: [newbie] Printer HELP!

Warning Could not process message with given Content-Type: multipart/signed; boundary=zS7rBR6csb6tI2e1; micalg=pgp-sha1;protocol="application/pgp-signature"

Re: [newbie] Printer HELP!

Pankil Richards wrote: Don Bonomini wrote: ...Is there like a print manager that i can cancell old print jobs? The easiest way (for me) is to unplug (and re-plug) the printer from the electrical outlet completely. This will ensure any and all "garbage" in it's memory to be erased.