On Tue, 2003-06-10 at 12:07, Poogle wrote:
>
> >
> > I wonder where to try next.
>
> No use trying me, I've run out of ideas (Big Sigh)
Thanks for the ideas, maybe I should start over with a new install, sure
hate to do that, I hardly ever reinstall any more, I used to enjoy it,
as a learning e
>
> I wonder where to try next.
No use trying me, I've run out of ideas (Big Sigh)
--
http://www.poogle.co.uk
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Mon, 2003-06-09 at 12:51, Poogle wrote:
> On Sunday 08 Jun 2003 H:24 pm, Marco Verheul wrote:
> > On Sun, 2003-06-08 at 10:11, Poogle wrote:
> > > >
> > > > When I do cat /proc/bus/usb/devices I get exactly that, except for the
> > > > ProdID that is different from yours e26. My ProdID 0x208f i
On Sunday 08 Jun 2003 H:24 pm, Marco Verheul wrote:
> On Sun, 2003-06-08 at 10:11, Poogle wrote:
> > >
> > > When I do cat /proc/bus/usb/devices I get exactly that, except for the
> > > ProdID that is different from yours e26. My ProdID 0x208f is similar to
> > > that shown on http://snapscan.sour
On Sun, 2003-06-08 at 10:11, Poogle wrote:
> >
> > When I do cat /proc/bus/usb/devices I get exactly that, except for the
> > ProdID that is different from yours e26. My ProdID 0x208f is similar to
> > that shown on http://snapscan.sourceforge.net/ so that part seems to be
> > in order.
> >
> > Ma
>
> When I do cat /proc/bus/usb/devices I get exactly that, except for the
> ProdID that is different from yours e26. My ProdID 0x208f is similar to
> that shown on http://snapscan.sourceforge.net/ so that part seems to be
> in order.
>
> Marco
O.K.
Make sure that your snape50.bin is executable
On Sat, 2003-06-07 at 12:07, Poogle wrote:
> Referring to http://snapscan.sourceforge.net/, you may or may not need the
> edit /etc/sane.d/snapscan.conf in respect of the firmware, but if you do you
> have edited it correctly.
> Next do cat /proc/bus/usb/devices
> and you should get something
On Saturday 07 Jun 2003 H:16 am, Anne Wilson wrote:
> On Saturday 07 Jun 2003 1:06 pm, Marco Verheul wrote:
> > Hi,
> >
> > I couldn't use my flatbed scanner on mdk 9.0 and I still can't on
> > 9.1. The scanner is a AGFA SnapScan e50, which is listed by SANE as
> > supported. Here is what I did sof
On Saturday 07 Jun 2003 2:18 pm, Marco Verheul wrote:
> On Sat, 2003-06-07 at 10:16, Anne Wilson wrote:
> > Sounds like a conflict to me. I think you have installed two
> > drivers - one from the Agfa disk and one from the Mandrake
> > install. If it were me, I would try getting rid of the stuff