Hi,
I wanted to upgrade from 3.3.6 to 4.2 but I have encountered a problem.
My card is a "Number Nine FX Motion 771" (S3 Inc. Vision 968 (rev 0))
and worked perfectly with the XF86_S3 server under 3.3.6.
Well, the status page http://www.xfree86.org/current/Status28.html#28
mentions
$ All har
Hello,
i'm trying to setup the twin view ( lcd screen + ext screen with one single
video card) on my Toshiba Satellite with a Savage card , but it doesnt
work : the clone mode is working, but i can't have my WM (enlightenment) divided
between the 2 screens
i 've tried with xinerama but i
I had no problems with that card and the drivers I got with X
Lionel
--- Rodrigo Leivas <[EMAIL PROTECTED]> wrote:
> Hi all,
>
> I have a problem with the configuration of the video card in the XFree server. The
>video card is
> a Matrox MGA 200 AGP. I've installed the 4.1.0 version of the XFree
Hi,
Ted Spradley wrote:
> > In the mailing lists I see reference to the message:
> >
> > INIT: Id "x" respawning too fast: disabled for 5 minutes
>
> If a process that init started dies, init restarts it, but if the same
> program keeps dying immediately every time it's restarted ini
Are you still having this problem and are you sure it is not an issue with
your monitor. I have an ATI Xpert PCI and I have not seen this problem.
Is it with all software or just certain applications?
John Supplee
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Exist a driver for ATI 3D Rage Mobility M1 8MB...
...I can run Xfree on a notebook Sony Vaio FX501
thanks, Gianmarco.
___
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newb
Hi All,
I'm trying to configure X on my Debian(Woody) box and I'm having some
trouble. The first thing that I did was to recompile the kernel
(2.4.16) and include the following options:
CONFIG_AGP=m
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_I810 is not set
# CONFIG_AGP_VIA is not set
# CONFIG
On Tue, 5 Feb 2002, Markus Schaber wrote:
> Ted Spradley wrote:
> > > In the mailing lists I see reference to the message:
> > >
> > > INIT: Id "x" respawning too fast: disabled for 5 minutes
> >
> > If a process that init started dies, init restarts it, but if the same
> > program kee
Hello all.
Running RHat 7.1.
Original kernel is 2.4.
I'm trying to upgrade my system.
after upgrading mkinitrd, SysVinit and initscripts
went for the kernel
When I exec this command:
rpm -ivh kernel-2.4.9-21.i586.rpm (what i want to
upgrade to)
I get:
error: failed dependencies:
e2fspro
Hi all. Anybody have any tips on doing this. I
tried to upgrade my RH 7.2 box so that I can use the updated ATI drivers and try
and get some hardware accel for MPEG playback but I just succeeded in screwing
up the system. So I have reinstalled and now want to try again but I don't want
to bl
I used the binaries and followed the instructions
ins and used xinstall.sh and it worked.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf
Of Tom Bednarchuk
Sent: Tuesday, February 05, 2002
1:30 PM
To: [EMAIL PROTECTED]
Subject: [Newbie]Upgrading
Expert but it appears that your XF86Config file is screwed up in the
following area:
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor"Monitor0"
DefaultDepth24
SubSection "Display"
Depth 1
EndSubSection
That's what I did but I guess that I answered one
of the questions to the installer incorrectly. Did you just go with the defaults
for everything ??
- Original Message -
From:
Otto
E. Haliburton
To: [EMAIL PROTECTED]
Sent: Tuesday, February 05, 2002 2:41
PM
Subje
The following is my experience upgrading to
XFree86 Version 4.1.0.1
(using Debian package management) under Linux 2.2.19
I have had some video problems, not all solved.
Hardware is an IBM ThinkPad 760ED, with a Trident Cyber 9385
aka TGUI9660. This is nicely detected by the server.
In all cases
At 02:29 PM 2/5/2002 -0500, you wrote:
Hi all.
Anybody have any tips on doing this. I tried to upgrade my RH 7.2 box so
that I can use the updated ATI drivers and try and get some hardware
accel for MPEG playback but I just succeeded in screwing up the system.
So I have reinstalled and now want to
Yes, you could have it replace all your
defaults but I did that the first time and got in trouble. I ended up
reinstall RH 4.1 and reinstalling to preserve RH’s files.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf
Of Tom Bednarchuk
Sent: Tuesd
> I used the binaries and followed the instructions ins and used
> xinstall.sh and it worked.
I am a newbie indeed, have not really upgraded anything before,
should i try this at all?
where would one find the binaries? I have mandrake 8.1 - should
i use rpms?
exploring my system:
$ xinst
I think that if you did it correctly then everything is ok. There is a
discussion in the archives of the fact that the binaries do change the
default window manager to twm and you need to go to directories in
/etc/X11/init and go to the desired window manager and change it to the
one that you wan
OK , we're gonna try it again before I get too far
along with this system. I'll let you know how it goes.
Thanks for the help all
Tom
- Original Message -
From:
Dennie Lee
To: [EMAIL PROTECTED]
Sent: Tuesday, February 05, 2002 6:40
PM
Subject: Re: [Newbie]Upgr
Hey all !!! Seems to be working well. Playing video
with XINE is only a 5-10% CPU utilization with the Rage Fury Pro doing the grunt
work. Now to get that TV out working !!!
Thanks again all
Tom
- Original Message -
From:
Tom Bednarchuk
To: [EMAIL PROTECTED]
Sent: Tu
Hello Folks,
I'm over the moon!
I have been trying for a long time to get X running on my laptop. It is
badged 'Pioneer' but is manufactured by Clevo. It is known by a lot of
names around the world. It is based on the SiS630 chip. It is a 1G PIII
with 256M of ram and with a SmartLink winmodem ba
I am having a similar problem with my ATI Xpert 2k
Pro. I posted last week, but I only got one response
and it didn't help (thanks anyways guys!). My problem
has something to do with the monitor frequencies I
think because I can make the lines and separations
larger and smaller by adjusting the hs
hi,
i have just installed 4.1.0 (after uninstall all the old 3.3.6 rpms), the
installation and configuration(with xf86config) went fine, i guess :). But
everytime i do "startx", it gave me the signal 11 error...dont know what the
problem is, please please help?
Thanks in advance
XFree86 V
Here's a link to a guy using an Xpert 200 Pro card
running Slack 8 kernel 2.4.9 who supposedly got X
working. Until I see it work on my box, I dunno...
http://www.goingware.com/linux/configs/bjarne/
Check out the file linx at the bottom
Chris
___
24 matches
Mail list logo