I had the same problem with my 435CDS and LM8.0 with 48MB of ram. LM7.2
installed normally and worked great, but I was not able to get 8.0 to
install. I tried all of the installation options and all of the images on
the install disk.
Lee
At 01:02 AM 10/25/2001 +0200, Frans Ketelaars wrote:
I am running celeron 366's with big GlobalWin coolers. They run cool at
550mhz (100mhz fsb) and SMP enabled using Mandrake 8.0.
Your 400mhz celerons do not overclock, I tried.
Intel made the celeron to compete with the cheaper AMD K6 chips. The
original release (without level 2 cache) was
Hello
Is there a timeout in kppp?
When downloading mail from isp everything works great unless I get a large
attatchment. Kmail and Netscape mail fail at the same point. The only way I have been
able to get these attatchments is to shut down and boot Windows.
I have also been unable to use
Hello
I upgraded (full re-install) my desktop computer from MDK 7.2 to MDK 8.0. I
am pleased with the later version, so I decided to upgrade my laptop computer.
I have a TOSHIBA 435 CDS with a 120 MHz processor and 48 Meg RAM. It was so
slow in MDK 7.1 LIN4WIN that it was useless. It was
I am having the same problem!!
I get the same response when I select the STAR OFFICE PRINTER SETUP, and the
STAR OFFICE SETUP from the K-MENU.
Lee Waters
On Tuesday 05 June 2001 14:37, David Beahm wrote:
When I click on the StarOffice icon, an installation screen comes up,
however
Hello
I installed Sane with frontends and backends (from MDK 8.0 install disk) on
my desktop computer running MDK 8.0. I can can access my scanner from GIMP,
but only get a communication error.
I am running an ABIT BP6 motherboard with a pair of Celeron 366's (at 550
Mbps) and 384K PC133
I am using MDK 7.2 on an Abit BP6 motherboard with dual Celeron.
cat /proc/cpuinfo
Lists both processors identically. Does this mean that SMP is enabled
and working? If not, how do I verify smp?
What does "1101 bogomips" mean.
Thanks in advance!
Lee
I have an ide cdrom, a scsi cdrw, and an atapi zip that show mounted, but
when I try to access them I get a not authorized error as user or root. In
permissions read, write and exe are checked.
I am running an abit bp6 with a pair of celeron 366's @ 550 and 384m pc133
ram. The SCSI controller
I have win2000Pro biggyback with win98se on the primary partition and
Mandrake 7.2 on the extended partition.
What line do I add to boot.ini to boot linux from the windows bootloader.
Lee
I am a total command line illiterate!
I have an Actiontec Call Waiting modem that I was able to get working once.
On re-boot and ever since I have not been able to connect.
In Windows it is on com port 5 and linux is ttyS4.
Two of the steps in the modem installation instructions are in
10 matches
Mail list logo