[NTG-context] \placefigure[location=here...] problem

Hi all, I am generating a quiz, with eight questions, each with text and a figure following it. The output was fine till the fifth question, but then the margin separating the text of each question disappeared and the figure got put on the next page one after the other. Can anyone suggest what I c

Re: [NTG-context] placefigure, usetikzlibrary and readfile

On 8/1/2021 10:27 PM, Jigé via ntg-context wrote: Hello all. It seems that \usetikzlibrary is sometimes read, sometimes not, and I don't understand why. Rationale: I would like, using one file, to use it to produce a picture, as with LaTeX's Standalone class, but to be able to include it in

[NTG-context] placefigure, usetikzlibrary and readfile

Hello all. It seems that \usetikzlibrary is sometimes read, sometimes not, and I don't understand why. Rationale: I would like, using one file, to use it to produce a picture, as with LaTeX's Standalone class, but to be able to include it in a calling document as well, for better management

[NTG-context] placefigure RTL

Hello, Is there a way to make \placefigure[left,right] work in RTL documents? Here's a MWE: \starttext \setupalign[r2l] \placefigure[none,right]{}{\externalfigure[cow]} \input knuth \placefigure[none,left]{}{\externalfigure[cow]} \input knuth \page \setupalign[l2r] \placefigure[none,right]{}{\ex

Re: [NTG-context] placefigure right or left error in ver: 2018.04.04 00:51 MKIV

On 9/27/19 2:33 PM, Philippe Oechslin wrote: > Hello there, > > I recently upgraded to ConTeXt ver: 2018.04.04 00:51 MKIV and found that > the following simple code gives an error, where as it compiled without > complaining in ver: 2017.05.15 21:48. > [...] > I am running a freshly installed Ubu

[NTG-context] placefigure right or left error in ver: 2018.04.04 00:51 MKIV

Hello there, I recently upgraded to ConTeXt ver: 2018.04.04 00:51 MKIV and found that the following simple code gives an error, where as it compiled without complaining in ver: 2017.05.15 21:48. \setupexternalfigures[location={local,default}] \starttext \input ward \placefigure[left,none]{}

Re: [NTG-context] placefigure and listoffigures

On Tue, 15 Mar 2016 23:01:46 +0100 Wolfgang Schuster wrote: > \startplacefigure [location={inmargin,none}] Thank you, clean and elegant (and much easier than Willi's suggestion). The syntax is a bit magical, though ("location" of the caption). Alan __

Re: [NTG-context] placefigure and listoffigures

Alan BRASLAU 15. März 2016 um 21:43 Hi, How can one suppress the addition of a placed figure to the listoffigures? In the following MWE, list=no places "no" as an alternative to the (blank) title. Alan \starttext \startplacefigure [location=inmargin,number=no,lis

Re: [NTG-context] placefigure and listoffigures

I would define another float and assign this not to be listed float to this new float-type something like \definefloat[Notlisted][figure] and then \startplaceNotlisted \externalf… \stopplaceNotlisted Best wishes Willi > On 15 mrt. 2016, at 21:43, Alan BRASLAU wrote: > > Hi, > > How ca

[NTG-context] placefigure and listoffigures

Hi, How can one suppress the addition of a placed figure to the listoffigures? In the following MWE, list=no places "no" as an alternative to the (blank) title. Alan \starttext \startplacefigure [location=inmargin,number=no,list=no] \externalfigure [cow] [width=1cm] \stopplacefigure \input

[NTG-context] \placefigure[right,high] in two column mode

Hello, Is it possible to place a figure to the right in two column mode? I always get it centered for some reason. \setupexternalfigures[location={local,global,default}] \starttext \startcolumns[two] % doesn't work \startplacefigure[location={nonumber,right,high}] \externalfigure[cow][width=2c

Re: [NTG-context] \placefigure and title bug in latest beta

Hi, I can confirm this… This is probably due to the new features Hans added today. Also, the new feature \placelist[figure][criterium=text] places indeed the list of the figures, but the names of the figures, or rather their captions are all indicated by the word « list ». Best regar

[NTG-context] \placefigure and title bug in latest beta

Hans-- In today's beta, the following produces a figure entitled "Figure 1 title": \setupexternalfigures[location={local,default}] \starttext \useexternalfigure[cow.pdf] \startplacefigure[title={A cow}] {\externalfigure[Graphic][cow.pdf]} \stopplacefigure \stoptext Alan _

Re: [NTG-context] \placefigure[right or left] failing in footnotes

Again, thanks. My tests so far indicate that the only way to go in footnotes is with \starthanging[location-right]...\stophanging--and to be happy with the output as it is (which is quite nice, when all is said and done). Alan On Mon, Mar 3, 2014 at 11:24 AM, Wolfgang Schuster < schuster.wolfg.

Re: [NTG-context] \placefigure[right or left] failing in footnotes

Am 03.03.2014 um 16:04 schrieb Alan Bowen : > The following does not work as it should: > > setupexternalfigures[location={local,default}] > > \starttext > text% > \footnote{\hangsidefloat[2] > \placefigure[right,none]{} > {\externalfigure[cow][width=.1\textwidth]} > \dorecurs

[NTG-context] \placefigure[right or left] failing in footnotes

The following does not work as it should: setupexternalfigures[location={local,default}] \starttext text% \footnote{\hangsidefloat[2] \placefigure[right,none]{} {\externalfigure[cow][width=.1\textwidth]} \dorecurse{3}{\input ward}} %for comparison \hangsidefloat[2] \placefigure[right,none]{} {\e

Re: [NTG-context] Placefigure without Caption-Numbering

On Sat, 30 Nov 2013 21:06:20 +0100 Jan Tosovsky wrote: > Indeed much cleaner. But that numbering option seems to be ignored ;-) > Does it work for you? Sorry, it is "number=no". Alan ___ If your question is of inter

Re: [NTG-context] Placefigure without Caption-Numbering

On 2013-11-30 Alan Braslau wrote: > On Sat, 30 Nov 2013 19:42:54 +0100 > Jan Tosovsky wrote: > > On 2013-04-16 Wolfgang Schuster wrote: > > > Am 16.04.2013 um 18:56 schrieb "H. Özoguz" > > > > > > > > How to deactive the Caption-Numbering: > > > > > > > > \starttext > > > > > > > > \placefigure[h

Re: [NTG-context] Placefigure without Caption-Numbering

On Sat, 30 Nov 2013 19:42:54 +0100 Jan Tosovsky wrote: > On 2013-04-16 Wolfgang Schuster wrote: > > Am 16.04.2013 um 18:56 schrieb "H. Özoguz" : > > > > > > How to deactive the Caption-Numbering: > > > > > > \starttext > > > > > > \placefigure[here]{Blub}{\externalfigure[image][width=6cm]} > >

Re: [NTG-context] Placefigure without Caption-Numbering

On 2013-04-16 Wolfgang Schuster wrote: > Am 16.04.2013 um 18:56 schrieb "H. Özoguz" : > > > > How to deactive the Caption-Numbering: > > > > \starttext > > > > \placefigure[here]{Blub}{\externalfigure[image][width=6cm]} > > > > \stoptext > > > > I want the caption "Blub", but not the "Figure 1"

Re: [NTG-context] placefigure problem

On 8/20/2013 12:08 PM, Wim W. Wilhelm wrote: Dear all, I encountered a problem with TexLive 2013 context. The problem persisted with the context beta. With LuaTex version beta-0.77.0-2013081719 (rev 4640) and ConTeXt ver: 2013.08.18 18:32 MKIV beta fmt: 2013.8.20 int: english/english I compile

[NTG-context] placefigure problem

Dear all, I encountered a problem with TexLive 2013 context. The problem persisted with the context beta. With LuaTex version beta-0.77.0-2013081719 (rev 4640) and ConTeXt ver: 2013.08.18 18:32 MKIV beta fmt: 2013.8.20 int: english/english I compiled: \starttext \chapter{c-titel} \section{s1

Re: [NTG-context] Placefigure inner/outer

Thanks Wolfgang! 2013/8/4 Wolfgang Schuster : > > Am 04.08.2013 um 22:53 schrieb Tim Steenvoorden : > >> Pitty. I used it a lot in a project I'm porting to MkIV. Will it be >> fixed someday? > > It depends on Hans, I’ll send him a mail about the problem. > > Wolfgang >

Re: [NTG-context] Placefigure inner/outer

Am 04.08.2013 um 22:53 schrieb Tim Steenvoorden : > Pitty. I used it a lot in a project I'm porting to MkIV. Will it be > fixed someday? It depends on Hans, I’ll send him a mail about the problem. Wolfgang ___ If yo

Re: [NTG-context] Placefigure inner/outer

Pitty. I used it a lot in a project I'm porting to MkIV. Will it be fixed someday? 2013/8/4 Wolfgang Schuster : > > Am 04.08.2013 um 22:40 schrieb Marco Patzer : > >> On 2013–08–04 Tim Steenvoorden wrote: >> >>> \starttext >>> \input knuth >>> \placefigure[left]{}{\externalfigure[figurename]} >>>

Re: [NTG-context] Placefigure inner/outer

Am 04.08.2013 um 22:40 schrieb Marco Patzer : > On 2013–08–04 Tim Steenvoorden wrote: > >> \starttext >> \input knuth >> \placefigure[left]{}{\externalfigure[figurename]} >> \input knuth >> \placefigure[inner]{}{\externalfigure[figurename]} > > What do you want to do? Place it in the margin? >

Re: [NTG-context] Placefigure inner/outer

No. I want to place the figure to the left of the text if it is on a odd page and to the right of the text if it is on a even page. Thus the same effect "left" and "right" have as keywords, but depending on the page it is on. Cheers, Tim 2013/8/4 Marco Patzer : > On 2013–08–04 Tim Steenvoorden wr

Re: [NTG-context] Placefigure inner/outer

On 2013–08–04 Tim Steenvoorden wrote: > \starttext > \input knuth > \placefigure[left]{}{\externalfigure[figurename]} > \input knuth > \placefigure[inner]{}{\externalfigure[figurename]} What do you want to do? Place it in the margin? \placefigure[inleft]{}{\externalfigure[figurename]} Marco

[NTG-context] Placefigure inner/outer

Hi all! This worked in MkII but doesn't in MkIV. Did something changed? Cheers, Tim \starttext \input knuth \placefigure[left]{}{\externalfigure[figurename]} \input knuth \placefigure[inner]{}{\externalfigure[figurename]} \input knuth \stoptext

Re: [NTG-context] Placefigure without Caption-Numbering

Am 16.04.2013 um 18:56 schrieb "H. Özoguz" : > How to deactive the Caption-Numbering: > > \starttext > > \placefigure[here]{Blub}{\externalfigure[image][width=6cm]} > > \stoptext > > I want the caption "Blub", but not the "Figure 1" label. \placefigure[here,nonumber]{…}{…} Wolfgang

[NTG-context] Placefigure without Caption-Numbering

How to deactive the Caption-Numbering: \starttext \placefigure[here]{Blub}{\externalfigure[image][width=6cm]} \stoptext I want the caption "Blub", but not the "Figure 1" label. Thanks! Huseyin ___ If your questio

Re: [NTG-context] placefigure

On 3/21/2013 11:04 PM, Sietse Brouwer wrote: On 21 March 2013 17:26, Hans Hagen wrote: while fixing some buglets that showed up in the test suite I ran into \placenamedfloat maybe worth wikifying (bug will be solved in beta) Wikified: http://wiki.contextgarden.net/Command/placenamedfloat Be

Re: [NTG-context] placefigure

On 21 March 2013 17:26, Hans Hagen wrote: > while fixing some buglets that showed up in the test suite I ran into > \placenamedfloat > maybe worth wikifying (bug will be solved in beta) Wikified: http://wiki.contextgarden.net/Command/placenamedfloat Below is what I wrote; is that correct? Groe

[NTG-context] placefigure

Hi, while fixing some buglets that showed up in the test suite I ran into: \starttext test \placefigure[somewhere:alpha][whatever]{alpha}{} test \placefigure[somewhere:beta] [whatever]{beta}{} test \placefigure[somewhere:gamma][whatever]{gamma}{} test \placefigure[somewhere:delta][whatever]{del

Re: [NTG-context] Placefigure without numbering

On Fri, 1 Feb 2013 22:42:10 +0100 "H. Özoguz" wrote: > Am 01.02.2013 21:58, schrieb ntg-context-requ...@ntg.nl: > > \startplacefigure [title=My description, reference=fig:demo, > > number=no] ? > > \stopplacefigure > Thanks Marco, and how to align the title at the center under the > picture? (No

Re: [NTG-context] Placefigure without numbering

Am 01.02.2013 21:58, schrieb ntg-context-requ...@ntg.nl: \startplacefigure [title=My description, reference=fig:demo, number=no] ? \stopplacefigure Thanks Marco, and how to align the title at the center under the picture? (Now it is flushright) Thanks Huseyin ___

Re: [NTG-context] Placefigure without numbering

Am 01.02.2013 21:58, schrieb ntg-context-requ...@ntg.nl: \startplacefigure [title=My description, reference=fig:demo, number=no] ? \stopplacefigure Thanks Marco, and how to align the title at the center under the picture? (Now it is flushright) Thanks Huseyin ___

Re: [NTG-context] Placefigure without numbering

On 2013–02–01 "H. Özoguz" wrote: > how to deactivate numbering for the following (empty) picture? > > \placefigure[here][fig:demo]{My description under the picture.}{} \startplacefigure [title=My description, reference=fig:demo, number=no] … \stopplacefigure Marco signature.asc Description:

[NTG-context] Placefigure without numbering

Hi there, how to deactivate numbering for the following (empty) picture? \placefigure[here][fig:demo]{My description under the picture.}{} Thanks, Huseyin P.S.: I know that for multi-line code my email-client seems to format the code with many spaces, how to control that, I am using Mozilla

Re: [NTG-context] \placefigure[margin] but in left margin?

On Thu, Jan 3, 2013 at 5:16 PM, Wolfgang Schuster < wolfgang.schus...@gmail.com> wrote: > > Am 03.01.2013 um 17:13 schrieb "Mikael P. Sundqvist" : > > On Thu, Jan 3, 2013 at 3:58 PM, Wolfgang Schuster < > wolfgang.schus...@gmail.com> wrote: > >> >> Am 03.01.2013 um 13:48 schrieb Mikael P. Sundqvis

Re: [NTG-context] \placefigure[margin] but in left margin?

Am 03.01.2013 um 17:13 schrieb "Mikael P. Sundqvist" : > On Thu, Jan 3, 2013 at 3:58 PM, Wolfgang Schuster > wrote: > > Am 03.01.2013 um 13:48 schrieb Mikael P. Sundqvist : > > > Dear list, > > > > I want to have the effect I get with \placefigure[margin] but I want it > > _always_ in the le

Re: [NTG-context] \placefigure[margin] but in left margin?

On Thu, Jan 3, 2013 at 3:58 PM, Wolfgang Schuster < wolfgang.schus...@gmail.com> wrote: > > Am 03.01.2013 um 13:48 schrieb Mikael P. Sundqvist : > > > Dear list, > > > > I want to have the effect I get with \placefigure[margin] but I want it > _always_ in the left margin instead of the right margi

Re: [NTG-context] \placefigure[margin] but in left margin?

Am 03.01.2013 um 13:48 schrieb Mikael P. Sundqvist : > Dear list, > > I want to have the effect I get with \placefigure[margin] but I want it > _always_ in the left margin instead of the right margin where it ends up by > default. I have tried several other keys but with leftmargin, inleft the

[NTG-context] \placefigure[margin] but in left margin?

Dear list, I want to have the effect I get with \placefigure[margin] but I want it _always_ in the left margin instead of the right margin where it ends up by default. I have tried several other keys but with leftmargin, inleft the figure is not put in the top of the page, "independent of the text

Re: [NTG-context] placefigure adds break

Hello, A follow-up on the solution \startpostponing [+0] \startplacefigure … \stopplacefigure \stoppostponing As a side effect, one then needs to be careful to surround ALL placefigures with \startpostponing[+0]\stoppostponing, even those that occur after a paragraph end (where one is not concern

[NTG-context] placefigure vs grid problem

Hello, I have found that placing figures in grid mode does problems with [left,right...] parameters. The figure brokes the text flow. (It suffice to turn grid=yes.) Any solution, please? Thanks, Honza \enableregime[utf] \mainlanguage[cz] \setuppapersize[A5][A5] \setuplayout[ *grid=yes* ] \setu

Re: [NTG-context] \placefigure padding

On Sun, 2012-03-11 at 10:01 +0100, Wolfgang Schuster wrote: > \setupfloats > [spacebefore=, >spaceafter=] > > you can control the space before and after the float, accepted are all values > for \blank (dimensions and keywords). That's probably the command I need, but I can't find any usefu

Re: [NTG-context] \placefigure padding

Am 11.03.2012 um 04:12 schrieb Kip Warner: > Hey list, > > The following minimal typesets a dummy figure. Note how there is about > two lines of empty space below the figure. How do I control the amount > of padding that surrounds the figure, such as the bottom? With \setupfloats [spacebefor

[NTG-context] \placefigure padding

Hey list, The following minimal typesets a dummy figure. Note how there is about two lines of empty space below the figure. How do I control the amount of padding that surrounds the figure, such as the bottom? \setupexternalfigures [frame=off, corner=rectangular, rulethickness=0.5pt] \st

Re: [NTG-context] placefigure shifting up?

I think I can nail the responsible one. As far as I can see the problem is tightly coupled with the following structure: \placefigure[][]{caption}{\startcombination[]{contents}{}{contents}{}\stopcombination} The other figures I have seem to placed well enough, the above structures behaving err

Re: [NTG-context] placefigure shifting up?

I might add to this report the following observation: In a document with \setuppapersize [S8][S8] the shifts appear now and then, whereas these are typeset normally when the document is place on \setuppapersize [A4][A4]. It seems that the papersize and placefigure sometimes have a problem wi

Re: [NTG-context] placefigure shifting up?

On 11-1-2012 20:01, Meer, H. van der wrote: In my document I have a number of \placefigures, some pdf's, some jpg's etc.. Mostly the figure are placed correct with respect to, the caption but sometimes for no apparent reason I can spot, the picture is shifted up. In the first illustration take

[NTG-context] placefigure shifting up?

In my document I have a number of \placefigures, some pdf's, some jpg's etc. Mostly the figure are placed correct with respect to, the caption but sometimes for no apparent reason I can spot, the picture is shifted up. In the first illustration taken from the document this is clearly seen, pictu

Re: [NTG-context] \placefigure and \em (again)

On 25-2-2011 9:44, Procházka Lukáš Ing. - Pontex s. r. o. wrote: ... Thanks for the answers. I'm familiar with using \dontleavehmode when needing to keep a figure midaligned; I had no idea that this would be a similar situation (and solution). {\em xxx ..} the first x triggers the start of a

Re: [NTG-context] \placefigure and \em (again)

Hello, of course I do not have the solution for the underlaying problem. I found out, that you can put a \strut in front of the problematic text and then it comes out ok. Another point is, that placing the whole text-part i.e. all 4 paragraphs in your example between \bgroup \egroup results in

Re: [NTG-context] \placefigure and \em (again)

... Thanks for the answers. I'm familiar with using \dontleavehmode when needing to keep a figure midaligned; I had no idea that this would be a similar situation (and solution). Best regards, Lukas On Fri, 25 Feb 2011 09:37:40 +0100, Wolfgang Schuster wrote: Am 25.02.2011 um 09:16 schr

Re: [NTG-context] \placefigure and \em (again)

Am 25.02.2011 um 09:16 schrieb Henning Hraban Ramm: > You can add a \strut in front of {\em - that’s a usual workaround for > problems with non-letters starting a paragraph. The usual workaround is \dontleavehmode. Wolfgang _

Re: [NTG-context] \placefigure and \em (again)

Am 25.02.2011 um 08:56 schrieb Procházka Lukáš Ing. - Pontex s. r. o.: > Hello, > > sorry for repeating this topic, maybe it's not too attractive. > > Please, have a look to the following problem. > > I wonder why the behaviour described bellow occurs and how to typeset a > paragraph starting

Re: [NTG-context] \placefigure and \em (again)

Am 2011-02-25 um 08:56 schrieb Procházka Lukáš Ing. - Pontex s. r. o.: --- \starttext \placefigure [left,none] {} { \startMPcode draw (0,0)--(6cm,6cm); \stopMPcode } This is a normal text -- it flows around the picture on the left side of the page as expected. {\

[NTG-context] \placefigure and \em (again)

Hello, sorry for repeating this topic, maybe it's not too attractive. Please, have a look to the following problem. I wonder why the behaviour described bellow occurs and how to typeset a paragraph starting with some text enclosed into {\em ...} group inside the "free" area formed (affected)

Re: [NTG-context] placefigure ?

Am 29.09.2010 um 19:44 schrieb R. Bastian: > On Tue, 28 Sep 2010 13:39:56 +0300 > Mari Voipio scribit: > >> On Tue, Sep 28, 2010 at 13:22, R. Bastian wrote: >>> In Mk II, I need to place figures - with numbers and captions - >>> but \placefigure is for floats and never places the figure [here]

Re: [NTG-context] placefigure ?

On Tue, 28 Sep 2010 13:39:56 +0300 Mari Voipio scribit: > On Tue, Sep 28, 2010 at 13:22, R. Bastian wrote: > > In Mk II, I need to place figures - with numbers and captions - > > but \placefigure is for floats and never places the figure [here]. > > Is there another way? > > I've found that mos

Re: [NTG-context] placefigure ?

On Tue, Sep 28, 2010 at 13:22, R. Bastian wrote: > In Mk II, I need to place figures - with numbers and captions - > but \placefigure is for floats and never places the figure [here]. > Is there another way? I've found that mostly [here,force] will do the trick, but sometimes a judiciously placed

[NTG-context] placefigure ?

Hello, In Mk II, I need to place figures - with numbers and captions - but \placefigure is for floats and never places the figure [here]. Is there another way? Thanks, -- René Bastian www.pythoneon.org www.musiques-rb.org __

Re: [NTG-context] \placefigure setups

Am 01.11.2009 um 15:23 schrieb Vyatcheslav Yatskovsky: Hello, Sorry for another newbie question, but how can I setup \placefigure so that its caption appeared as "Рис. 1.1"? That is, with "Рис." prefix and numbered by subsection? \setuplabeltext[ru][figure=Рис. ] Wolfgang __

[NTG-context] \placefigure setups

Hello, Sorry for another newbie question, but how can I setup \placefigure so that its caption appeared as "Рис. 1.1"? That is, with "Рис." prefix and numbered by subsection? Best regards, Vyatcheslav ___ If your q

Re: [NTG-context] placefigure broken in mkiv?

Am 16.10.2009 um 15:29 schrieb Vyatcheslav Yatskovsky: please add this to the new mkii/mkiv difference page on the wiki) OK, but where this page is? http://wiki.contextgarden.net/MkIV_Differences (Oh, I we could get rid of these empty parenthesizes, it would be even nicer. Let's clean th

Re: [NTG-context] placefigure broken in mkiv?

Hello, Thanks, Wolfgang. \placefigure[middle,none]{}{...} the official way in mkiv (please add this to the new mkii/mkiv difference page on the wiki) OK, but where this page is? (Oh, I we could get rid of these empty parenthesizes, it would be even nicer. Let's clean the syntax! ) Vyat

Re: [NTG-context] placefigure broken in mkiv?

Alan BRASLAU wrote: However, on the subject of \placefigure, there appears to be a small bug in mkiv. (Untested) minimal example: \usemodule[bib] \starttext \placefigure[right,none]{}{\externalfigure[file][width=.3\textwidth] Text...\cite{Me2009} \blank[2*line] \placepublications[criter

Re: [NTG-context] placefigure broken in mkiv?

On Thursday 15 October 2009 17:29:12 Wolfgang Schuster wrote: > Am 15.10.2009 um 16:04 schrieb Vyatcheslav Yatskovsky: > > Hello, > > > > A document that was previously compiled successfully a few months > > ago, now throws an exception. > > > > My code: > > \placefigure > > [middle] > > {none} >

Re: [NTG-context] placefigure broken in mkiv?

Am 15.10.2009 um 16:04 schrieb Vyatcheslav Yatskovsky: Hello, A document that was previously compiled successfully a few months ago, now throws an exception. My code: \placefigure [middle] {none} {\externalfigure[2009-05-26_200309s][width=0.9\textwidth]} \placefigure[middle,none]{}{..

[NTG-context] placefigure broken in mkiv?

Hello, A document that was previously compiled successfully a few months ago, now throws an exception. My code: \placefigure [middle] {none} {\externalfigure[2009-05-26_200309s][width=0.9\textwidth]} My result: ! Missing number, treated as zero. \currentfloatattribut

Re: [NTG-context] placefigure[right] draws figures inside framed text (Willi Egger)

ards, Jos Message: 4 Date: Wed, 8 Jul 2009 16:44:11 +0200 From: Willi Egger Subject: Re: [NTG-context] placefigure[right] draws figures inside framedtext To: mailing list for ConTeXt users Message-ID: Content-Type: text/plain; charset=US-ASCII; delsp=yes; for

Re: [NTG-context] placefigure[right] draws figures inside framed text

Hi, use \framedtext[width=.5\textwidth]{...}. Framed text breaks over the lines. Do not use a \vbox Willi On Jul 8, 2009, at 1:54 PM, Jos van Gisbergen wrote: Hello, I'm using framed text to display verbatim sourse code. The frame should use the entire textwidth, so I use width=broad.

[NTG-context] placefigure[right] draws figures inside framed text

Hello, I'm using framed text to display verbatim sourse code. The frame should use the entire textwidth, so I use width=broad. A problem occurs when I use a figure placed at the right side of the page, before a framed text section: the figure is drawn *inside* the frame. With non-framed text every

Re: [NTG-context] \placefigure not centering

Marcin Borkowski wrote: > Dnia Wed, Aug 27, 2008 at 11:14:26AM +0200, Marcin Borkowski napisał(a): >> Why this does not center the figure horizontally? What should I do to >> center it? >> >> \placefigure{none}{ >> \starttikzpicture[scale=0.3] >> \draw (0,0) -- (5,0) -- (4.5,6) -

Re: [NTG-context] \placefigure not centering

Marcin Borkowski wrote: > Dnia Wed, Aug 27, 2008 at 11:14:26AM +0200, Marcin Borkowski napisał(a): >> Why this does not center the figure horizontally? What should I do to >> center it? >> >> \placefigure{none}{ >> \starttikzpicture[scale=0.3] >> \draw (0,0) -- (5,0) -- (4.5,6) -

Re: [NTG-context] \placefigure not centering

Dnia Wed, Aug 27, 2008 at 11:14:26AM +0200, Marcin Borkowski napisał(a): > Why this does not center the figure horizontally? What should I do to > center it? > > \placefigure{none}{ > \starttikzpicture[scale=0.3] > \draw (0,0) -- (5,0) -- (4.5,6) -- (1.5,6) -- cycle; > \st

[NTG-context] \placefigure not centering

Hey! Seems I'm going to ask lots of questions here - I'm starting to _really_ use ConTeXt;). Why this does not center the figure horizontally? What should I do to center it? \placefigure{none}{ \starttikzpicture[scale=0.3] \draw (0,0) -- (5,0) -- (4.5,6) -- (1.5,6) -- cycle;

Re: [NTG-context] placefigure[hang] in columns

Christof Meigen wrote: > > Hi, > > I'm quite new to ConTeXT, so excuse me if the solution is obvious. > > I'm trying to typeset a document with three columns which contains _a > lot_ of graphics, most of which are pretty small, about one third of a > column. > > Unfortunately, while \placefig

[NTG-context] placefigure[hang] in columns

Hi, I'm quite new to ConTeXT, so excuse me if the solution is obvious. I'm trying to typeset a document with three columns which contains _a lot_ of graphics, most of which are pretty small, about one third of a column. Unfortunately, while \placefigure[left,hang] works fine with one column,

Re: [NTG-context] placefigure

> I tried your command but it doesn't work on my pc. Maybe ghostscript isn't installed? What was the exact error? On my system (i386 laptop with Ubuntu GNU/Linux): $ gs -h GPL Ghostscript 8.54 (2006-05-17) but most versions of ghostscript should work. -Sanjoy "Creativity can be a social cont

Re: [NTG-context] placefigure

On Sat, 28 Jul 2007 09:19:45 +0200 "Liesbeth van der Plas" <[EMAIL PROTECTED]> wrote: > Hallo Sanjoy, > > I tried your command but it doens't work on my pc. > > Liesbeth try "gswin32c -sDEVICE=bbox -dSAFER -dBATCH -dNOPAUSE -q file.eps" Wolfgang

Re: [NTG-context] placefigure

Hallo Sanjoy, I tried your command but it doens't work on my pc. Liesbeth 2007/7/28, Sanjoy Mahajan <[EMAIL PROTECTED]>: > > > you can load the eps graphic in ghostview, then hit the "i"-key. > > but i agree, that this method is a pain in the ???, if you have many > > graphics. > > The followin

Re: [NTG-context] placefigure

> you can load the eps graphic in ghostview, then hit the "i"-key. > but i agree, that this method is a pain in the ???, if you have many > graphics. The following command often finds the right bounding box: gs -sDEVICE=bbox -dSAFER -dBATCH -dNOPAUSE -q file.eps -Sanjoy "Creativity can be a s

Re: [NTG-context] placefigure

> Here are the three most important files from yesterday's map. I looked at the .eps file in emacs, and it has junk at the beginning and the end. My system (GNU/Linux) says: $ file testPlaatje.eps testPlaatje.eps: DOS EPS Binary File Postscript starts at byte 30 length 4085 Metafile star

Re: [NTG-context] placefigure

I use Illustrator. That certainly works -- you can save the pictures as pdfs (it's Adobe, after all). Liesbeth van der Plas wrote: > Hello Patrick, Peter,.. > > > The 3-step method doesn't work? I tried it over and over again. > > Changing the media size by hand does work if I guess the size of

Re: [NTG-context] placefigure

Liesbeth van der Plas schrieb: > Hello Patrick, Peter,.. > > > The 3-step method doesn't work? I tried it over and over again. > yes, sorry about that. only changing the media size works. > Changing the media size by hand does work if I guess the size of the > picture (I don't have an option bb

Re: [NTG-context] placefigure

Hello Patrick, Peter,.. The 3-step method doesn't work? I tried it over and over again. Changing the media size by hand does work if I guess the size of the picture (I don't have an option bb or bounding box). I think I can work with this method for the time being. Do you know if this boundin

Re: [NTG-context] placefigure

Peter Rolf schrieb: > Hi Liesbeth, > > There is a problem with the bounding box (bb) of the eps file. Although > gs shows it correctly (Info), it uses the media size (default A4) as > border for the pdf. > > You can change the media size by hand (set it to bb), but it's less > error prone to use

Re: [NTG-context] placefigure

Le Thu, 26 Jul 2007 08:36:53 +0200, Liesbeth van der Plas a écrit : > Hallo Patrick, > > Yesterday I sent a few files, but I got a return that the message body was > too big. > Here are the three most important files from yesterday's map. > > Liesbeth > > > > 2007/7/25, Liesbeth van der Plas

Re: [NTG-context] placefigure

Hi Liesbeth, There is a problem with the bounding box (bb) of the eps file. Although gs shows it correctly (Info), it uses the media size (default A4) as border for the pdf. You can change the media size by hand (set it to bb), but it's less error prone to use "extract..." or "ps to eps" from the

Re: [NTG-context] placefigure

> I use Windows XP. Sorry Liesbeth, I am out of my wits then, perhaps there is somebody out here with some tricks. Perhaps you can use some special printer driver that is able to create different kind of eps or pdf and then use 'print to file' to create the pdf. Does ghostscript offer such a thi

Re: [NTG-context] placefigure

I use Windows XP. 2007/7/26, Patrick Gundlach <[EMAIL PROTECTED]>: Hello Liesbeth, > Yesterday I sent a few files, but I got a return that the message body was > too big. > Here are the three most important files from yesterday's map. epstopdf breaks with this file. If, by chance, you use Mac

Re: [NTG-context] placefigure

Hello Liesbeth, > Yesterday I sent a few files, but I got a return that the message body was > too big. > Here are the three most important files from yesterday's map. epstopdf breaks with this file. If, by chance, you use Mac OS X, you can use 'pstopdf' (the distiller from adobe). Then the pdf f

Re: [NTG-context] placefigure

Hello Liesbeth, do you have a small sample eps file which gives you a problem? That way we might be able to help you better. Patrick ___ If your question is of interest to others as well, please add an entry to the W

Re: [NTG-context] placefigure

In GhostScript: Options àEPS Clip File à Convert à pdfwrite, Variable Page File à Convert à pdfwrite, Fixed Page Size File à Convert à pdfwrite, Shrink to fit Page Size I do get the picture now, but it is inbedded in a (s

Re: [NTG-context] placefigure

2007/7/24, Roelof Langman <[EMAIL PROTECTED]>: > This is a simple case of rtfm. From chapter 7 of the pdftex manual: > > "pdfTEX supports inclusion of pictures in png, jpeg, tiff and pdf format. Please update. tiff is long gone... Best Martin ___

Re: [NTG-context] placefigure

This is a simple case of rtfm. From chapter 7 of the pdftex manual: "pdfTEX supports inclusion of pictures in png, jpeg, tiff and pdf format. The most common technique -the inclusion of eps figures- is replaced by pdf inclusion. eps files can be converted to pdf by GhostScript, Acrobat Distiller o

Re: [NTG-context] placefigure

I don't succeed in using the program epstopdf for my drawing. Probably it is also not very handy to alter a lot of drawings bij hand first? Or maybe there is a way to make MetaPost drawings without learning the MetaPost language? I have a lot of drawings made in Macromedia(=Adobe) Flash (or FreeHa

  1   2   >