Hi,
>From what I understood about buffer_id is that they are used to identify where
>the packet are stored in the buffer instead of passing the entire packet
>payload to the controller during a packet_in message.
However, when using NOX classic (in Python), I also noticed that when you send
a
k you for your swift reply,
Heming
From: Ali Al-Shabibi [ali.al-shab...@stanford.edu]
Sent: May 29, 2012 15:04
To: Heming Wen
Cc: openflow-discuss@lists.stanford.edu
Subject: Re: New Flowvisor JSON configuration file not writing
> Hi Ali,
Hi Heming,
&
Hi everyone,
I am trying to setup the L3 Inband control (APTYPE=0) on the recently released
PC Engine Openflow image. The image I am using is the one Masa released earlier
this year in March. It's the one compatible with Openflow v1.0 with no need of
manual upgrade. However, even after followin
Hi Ali,
I was using the binary for Flowvisor on 32-bit Ubuntu 10.04. It used to work
fine. With the recent automatic update to the new version, it is no longer
working the same as before. First of all, it seems I cannot run flowvisor nor
fvconfig generate unless I am under sudo/root, which does
ontents of openflow-discuss digest..."
Today's Topics:
1. Wireless NIC Bonding for n-casting demo (Kevin Han)
2. Re: Wireless NIC Bonding for n-casting demo (Ben Pfaff)
3. Re: Openflow ncasting Client (Kevin Han)
4. Re: Openflow ncas
m: yap...@gmail.com [yap...@gmail.com] on behalf of kk yap
[yap...@stanford.edu]
Sent: May 18, 2012 14:24
To: Heming Wen
Cc: openflow-discuss@lists.stanford.edu; Masayoshi Kobayashi
Subject: Re: [openflow-discuss] OpenRoads controller link with PC Engine AP
> For both cases, the AP did send
[yap...@stanford.edu]
Sent: May 18, 2012 11:32
To: Heming Wen
Cc: openflow-discuss@lists.stanford.edu; Masayoshi Kobayashi
Subject: Re: [openflow-discuss] OpenRoads controller link with PC Engine AP
Hi, some comments inline.
Regards
KK
On 18 May 2012 08:17, Heming Wen wrote:
> Hello again,
>
age (with the old instructions) and try again.
Thank you!
Best Regards,
Heming
From: yap...@gmail.com [yap...@gmail.com] on behalf of kk yap
[yap...@stanford.edu]
Sent: May 11, 2012 14:23
To: Heming Wen
Cc: Dan Talayco; openflow-discuss@lists.stanford.edu
no response to inactivity probe after 5 seconds, disconnecting". I wasn't
able to obtain a good slice of the tcpdump on the AP side because the traffic
level was extremely high. I'll try to filter out some of it and see if if the
AP ever received the message from the controller.
Do
be an issue?
Thank you for your kind response,
Regards,
Heming
____
From: yap...@gmail.com [yap...@gmail.com] on behalf of kk yap
[yap...@stanford.edu]
Sent: May 10, 2012 15:51
To: Dan Talayco
Cc: Heming Wen; openflow-discuss@lists.stanford.edu
Subject: Re: [ope
start off with.
Thank you again,
Heming
From: yap...@gmail.com [yap...@gmail.com] on behalf of kk yap
[yap...@stanford.edu]
Sent: May 10, 2012 13:55
To: Heming Wen
Cc: Dan Talayco; openflow-discuss@lists.stanford.edu
Subject: Re: [openflow-discuss] OpenRoads
ent: May 9, 2012 22:19
To: Heming Wen
Cc: Dan Talayco; openflow-discuss@lists.stanford.edu
Subject: Re: [openflow-discuss] OpenRoads controller link with PC Engine AP
Hi Heming,
One way is to have only the AP in inband mode. Get your switch to the
controller, then make sure the controller is also acc
?
Thank you,
Heming
From: Dan Talayco [dan.tala...@bigswitch.com] on behalf of Dan Talayco
[dtala...@stanford.edu]
Sent: May 9, 2012 18:00
To: Heming Wen
Cc: openflow-discuss@lists.stanford.edu
Subject: Re: [openflow-discuss] OpenRoads controller link with PC
Greetings,
We are currently setting up a basic Openflow Wireless testbed with three PC
Engine AP and a Pronto 3290 switch in our labs. We have a few questions
regarding the connection between the elements:
1) There are three controller path setups possible: L3 inband, tunneling and L2
inband.
you,
Heming
From: Diana Marosin [marosin.di...@gmail.com]
Sent: April 30, 2012 18:22
To: Heming Wen
Cc: openflow-discuss@lists.stanford.edu; rwh...@i-a-i.com
Subject: Re: [openflow-discuss] Openflow wireshark dissector not recognized
I am not sure if this is
Hi Ryan and Rob,
I have the same problem regarding the Wireshark dissector. At first, I have the
same problem as Ryan regarding a message "'of' is neither a field nor a
protocol name." It turned out I installed under root. However, when I tried
re-installing it as regular user, I get the messag
From: yap...@gmail.com [yap...@gmail.com] on behalf of kk yap
[yap...@stanford.edu]
Sent: March 3, 2012 20:01
To: Heming Wen
Cc: openflow-discuss@lists.stanford.edu
Subject: Re: [openflow-discuss] PC Engine AP booting errors for OpenRoads
Hi Heming,
Sorry for the late response
@gmail.com [yap...@gmail.com] on behalf of kk yap
[yap...@stanford.edu]
Sent: March 3, 2012 20:01
To: Heming Wen
Cc: openflow-discuss@lists.stanford.edu
Subject: Re: [openflow-discuss] PC Engine AP booting errors for OpenRoads
Hi Heming,
Sorry for the late response.
The difference in size of t
the image is
properly flashed on the CF card, which in this case I believe has failed.
Did anyone encounter similar issues before or have any good suggestions?
Thank you in advance for your support,
Heming Wen
McGill University
___
openflow-discuss mai
19 matches
Mail list logo