Hi
Planning the following setup
nxge1+nxge2+nxge3+nxge4 = aggr1
aggr10001 = vlan10
aggr20001 = vlan20
aggr30001 = vlan30
aggr40001 = vlan40
aggr10001:1 - interface for 1st zone in vlan10
aggr10001:2 - interface for 2nd zone in vlan10 etc
On switch side LACP + trunking is
Thanks Mike, I was able to get the jumpstart done by removing the aggregate and
the trunking (thanks to meem) ... i was just thinking that maybe the setup was
not working because of the
When the nxge interface sends out its rarp request to get its IP during the
start of jumpstart, it is an
Hi
Planning the following setup
nxge1+nxge2+nxge3+nxge4 = aggr1
aggr10001 = vlan10
aggr20001 = vlan20
aggr30001 = vlan30
aggr40001 = vlan40
aggr10001:1 - interface for 1st zone in vlan10
aggr10001:2 - interface for 2nd zone in vlan10 etc
On switch side LACP + trunking is configured, the
I am trying to do static link aggregation using a Netgear switch.Open solaris
System has an aggregation that consists of two interfaces, bge0 and bge1.
These interfaces are connected to the switch through aggregated ports. If both
links are connected, in Netgear, traffic is only on one link
On 08/14/09 07:46, rudro wrote:
I am trying to do static link aggregation using a Netgear switch.Open solaris
System has an aggregation that consists of two interfaces, bge0 and bge1. These
interfaces are connected to the switch through aggregated ports. If both links are
connected, in
rudro stated:
I am trying to do static link aggregation using a Netgear switch.Open
solaris System has an aggregation that consists of two interfaces, bge0 and
bge1. These interfaces are connected to the switch through aggregated ports. If
both links are connected, in Netgear, traffic is
Hi,all:
I tried to install solaris 10 on a T2000 boxes (T1 8 cores,32
multi-threading CPU) in recent days, after installation, I tried dladm to
test the 802.3 link aggregation,but failed, error msg is :
bash-3.00# dladm create-aggr -d ipge0 -d ipge1 1
dladm: create operation failed: No such file