Am Mittwoch, 29. August 2007 08:06 schrieb [EMAIL PROTECTED]:
> I installed VirtualBox SOE v1.4 from opensuse repositories. But when I try
> to run it, this error shows up :
>
> VirtualBox kernel driver not installed. The vboxdrv kernel module was
> either not loaded or /dev/vboxdrv was not created
Bob S wrote:
Hello SuSE people,
Downloaded the latest nvidia driver last night.
The latest nVidia driver is 100.14.11 and not x.09.
However, you would need to go to the nVidia site itself to get it.
(100.14.09) RPMs from the
Nvidia repo. Installed OK, but, GLXgears shows only about 2900 F
I dont know what could possibly cause this error after I restart my
notebook :
GConf schema installer error, battery_low_percentage cannot be zero
What should I do? GNOME-panel are all gone after blinking on startup. Last
thing I did was install packet smart and smart-gui.
Rgds
Hans
--
To unsu
I installed VirtualBox SOE v1.4 from opensuse repositories. But when I try
to run it, this error shows up :
VirtualBox kernel driver not installed. The vboxdrv kernel module was
either not loaded or /dev/vboxdrv was not created for some reason.
Re-setup the kernel module by executing '/etc/init.d/
Suse 10.2 on Latitude D820, KDE normally shows 4 buttons for the 4
desktops. Under Compiz, it shows 16. 1 thru 4 are labeled desktop 1 thru
4 as you hold the mouse cursor over the button. Buttons 5 thru 16 show
up as desktop 1.
How can I get rid of the extra 12 buttons? KDE desktop config and comp
On Aug 29 2007 22:50, Bob S wrote:
>
>Downloaded the latest nvidia driver last night. (100.14.09) RPMs from the
>Nvidia repo. Installed OK, but, GLXgears shows only about 2900 FPS.
>Shouldn't it be much faster? I get the nvidia spalsh at bootup amd my
>xorg.conf shows nvidia as the driver.
>
>
> > > Downloaded the latest nvidia driver last night. (100.14.09) RPMs from the
> > > Nvidia repo. Installed OK, but, GLXgears shows only about 2900 FPS.
> > > Shouldn't it be much faster? I get the nvidia spalsh at bootup amd my
> > > xorg.conf shows nvidia as the driver.
> >
> > 2900 fps? wow, w
On Wednesday 29 August 2007 22:48:36 joe wrote:
> Bob S wrote:
> > Hello SuSE people,
> >
> > Downloaded the latest nvidia driver last night. (100.14.09) RPMs from the
> > Nvidia repo. Installed OK, but, GLXgears shows only about 2900 FPS.
> > Shouldn't it be much faster? I get the nvidia spalsh a
On Wed, 2007-08-29 at 23:32 -0400, steve wrote:
> joe wrote:
> > Bob S wrote:
> >
> >> Hello SuSE people,
> >>
> >> Downloaded the latest nvidia driver last night. (100.14.09) RPMs from the
> >> Nvidia repo. Installed OK, but, GLXgears shows only about 2900 FPS.
> >> Shouldn't it be much fast
joe wrote:
Bob S wrote:
Hello SuSE people,
Downloaded the latest nvidia driver last night. (100.14.09) RPMs from the
Nvidia repo. Installed OK, but, GLXgears shows only about 2900 FPS.
Shouldn't it be much faster? I get the nvidia spalsh at bootup amd my
xorg.conf shows nvidia as the dri
Am Donnerstag, 30. August 2007 03:44 schrieb James Knott:
> SOTL wrote:
> > http://www.groklaw.net/article.php?story=2007082918292633
>
> I find the stories about MS stuffing the ISO ballot box to be more
> interesting, such as 37 identical letters sent to the Norwegian
> committee. Or how MS boug
Bob S wrote:
> Hello SuSE people,
>
> Downloaded the latest nvidia driver last night. (100.14.09) RPMs from the
> Nvidia repo. Installed OK, but, GLXgears shows only about 2900 FPS.
> Shouldn't it be much faster? I get the nvidia spalsh at bootup amd my
> xorg.conf shows nvidia as the driver
Hello SuSE people,
Downloaded the latest nvidia driver last night. (100.14.09) RPMs from the
Nvidia repo. Installed OK, but, GLXgears shows only about 2900 FPS.
Shouldn't it be much faster? I get the nvidia spalsh at bootup amd my
xorg.conf shows nvidia as the driver.
Doesn't appear to be rig
On Wednesday 29 August 2007 21:14, Kai Ponte wrote:
> Huh?
> http://openprinting.org/show_printer.cgi?recnum=Epson-Stylus_C87
Is that means, driver for C87 is also working for C87+?
--
Salam,
Adi Nugroho
PT. iNterNUX - Internet Service Provider
Jalan Dr. Sam Ratulangi No. 53J Makassar
Tel. +62
SOTL wrote:
> http://www.groklaw.net/article.php?story=2007082918292633
>
I find the stories about MS stuffing the ISO ballot box to be more
interesting, such as 37 identical letters sent to the Norwegian
committee. Or how MS bought so many members on Sweden's committee etc.
--
Use OpenOffic
http://www.groklaw.net/article.php?story=2007082918292633
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Hi Marcus,
I have checked my matlab installation and I can launch standalone matlab under
both 32 and 64 linux.
The code snippet from Mathworks is:
/*
* Start the MATLAB engine locally by executing the string
* "matlab"
*
* To start the session on a
On 2007-08-29 15:31:01 -0700, Vahe Avedissian wrote:
> I have open SuSE 10.2 32 and 64 bit installed on the same machine.
>
> I compile a small matlab example under 32b (either by booting 32b
> linux or -m32 compiler flag) and run under 32 and 64 bit linux. The
> code compiles under both environme
Hi,
I have open SuSE 10.2 32 and 64 bit installed on the same machine.
I compile a small matlab example under 32b (either by booting 32b linux or -m32
compiler flag) and run under 32 and 64 bit
linux. The code compiles under both environments.
However, the code runs normally under 32b linux, bu
On 8/29/07, Jorge Fábregas <[EMAIL PROTECTED]> wrote:
> Hello Guys,
>
> Do anyone of you use any tape drive for personal backup? I personally use a
> 2nd internal hard-drive where I perform nightly backups but twice a year I
> backup to offline media (DVD-R DL media)...but right now I'm reaching 10
Hello Guys,
Do anyone of you use any tape drive for personal backup? I personally use a
2nd internal hard-drive where I perform nightly backups but twice a year I
backup to offline media (DVD-R DL media)...but right now I'm reaching 100 GB
of data...that's a bunch of data to burn! (even if it'
Hi !
Anyone has been able to configure Asterisk 1.4.10 to work with freePBX on SuSE
10.2?
I am struggling to do so dispite following instruction on freePBX install
guide.
I have downloaded Asterisk 1.4.10 RPMs from:
download.opensuse.org/repositories/home:/vitsoft/openSUSE_10.2/i586/
Thanks i
Hi lists and Novell,
as I set up a diskless boot, I am facing a rather desktop-oriented
problem. Have a look at this screenshot:
http://jengelh.hopto.org/GFX0/ohnoes.png
what we see here is
* opensuse/novell registration
* “wanna configure your network card?”
Is ther
http://dazuko.org/
you can just wait for 2.3.4 :-)
Yuriy Lalym wrote:
> In "/usr/src/linux-2.6.22.1-14/include/linux/dcache.h"
>
>
> extern char *__d_path(struct dentry *, struct vfsmount *, struct
> dentry *, struct vfsmount *, char *, int, int);
>
>
> In "dazuko-2.3.3/dazuko_linux26.c"
2007/8/29, Ciro Iriarte <[EMAIL PROTECTED]>:
> Hi, trying to update a [EMAIL PROTECTED] system with the latest KDE3
> packages from build service i get a lot of conflicts between kdelibs3
> and kdelibs3-32bit. Shouldn't this libraries go to a different
> directory?
>
> Example:
>
> error: file /opt
Was wondering if anyone had run into the problem of openXchange as setup
default in opensuse, that contacts (using ldap and postgresql) are in
the database but not showing up when doing a search?
Powered by Open-Xchange.com
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional comman
On Wednesday 29 August 2007 10:46, Robert Lewis wrote:
> I was thinking about buying a Q6600 processor that
> has four cores.
>
> Does anyone have htop running using this processor?
It handles two just fine, I'm sure four will work, too.
> Does htop show all four cores?
It should.
> Is the cu
On Aug 29 2007 19:55, Jan Engelhardt wrote:
>On Aug 29 2007 10:46, Robert Lewis wrote:
>>I was thinking about buying a Q6600 processor that
>>has four cores.
>>
>>Does anyone have htop running using this processor?
>>Does htop show all four cores?
>
>top (not sure about htop) will show 'cpus', whi
On Aug 29 2007 10:46, Robert Lewis wrote:
>I was thinking about buying a Q6600 processor that
>has four cores.
>
>Does anyone have htop running using this processor?
>Does htop show all four cores?
top (not sure about htop) will show 'cpus', which is the liberal term for core
in linux.
>Is the c
I was thinking about buying a Q6600 processor that
has four cores.
Does anyone have htop running using this processor?
Does htop show all four cores?
Is the current kernel multi-threaded such that the
end user gets any benefit if they purchase this processor?
My laptop has dual core and I do se
Bogdan Cristea schreef:
> Sorry, I was not clear enough. The web page is opened locally.
>
> On Wednesday 29 August 2007 13:10, you wrote:
>> Bogdan Cristea wrote:
>>> I have a html page with a search box using a php script. However the
>>> search facility does not work, each time I press enter a
Jan Engelhardt wrote:
> On Aug 24 2007 12:19, David C. Rankin wrote:
>
>> Mates,
>>
>>On my Toshiba P35 laptop with the ati Radeon 9700 chipset and the
>> latest drivers install via yast, there is no 3D and glxgears gives only
>> 160 FPS. The fglrx rpms installed are:
>>
>> Rankin-P35a:/hom
Thanks, looks good. There is too much info out there to make google a friend.
I'm very surprised that Novell does not have an easy to find HowTo for this.
Greg
On 8/29/07, G T Smith <[EMAIL PROTECTED]> wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Greg Freemyer wrote:
> > All,
>
On 8/29/07, G T Smith <[EMAIL PROTECTED]> wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Greg Freemyer wrote:
> > All,
> >
> > I have a few remote samba shares I want to mount from my desktop.
> >
> > I have not found the magic method yet.
> >
> > I looked in Yast - nothing, the opens
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Greg Freemyer wrote:
> All,
>
> I have a few remote samba shares I want to mount from my desktop.
>
> I have not found the magic method yet.
>
> I looked in Yast - nothing, the opensuse wiki - nothing, google - lots
> but it does not seem to work on
Am Mittwoch, 29. August 2007 16:57:13 schrieb Guido Pinkernell:
> Hi all,
>
> I recently sent this to the openoffice mailing list, with no response yet.
> Probably this has more to do with opensuse. Here we go:
>
> This problem occurs on my freshly installed openSUSE 10.2 x86-64 system
> with openo
Hello,
I'm probably dumb or not well awaiken :-).
I use openSUSE 10.2
I have an ethernet card for internet link (fixed IP)
I just plugin a pcmcia wifi (wlan) card seen as Ralink RT2500 802.11g
cardbus miniPCI.
I don't have any other wifi of my own, except a wifi cellular phone.
I configured
On 8/29/07, Art Fore <[EMAIL PROTECTED]> wrote:
>
> In ~.kde/Autostart/startcompiz.sh, I changed it from
>
> #! /bin/sh
> compiz --replace ccp &
> emerald --replace &
>
You do not require emerald --replace in there, add that to ccsm ->
decoration -> command.
See also: http://en.opensuse.org/Compi
Hi all,
I recently sent this to the openoffice mailing list, with no response yet.
Probably this has more to do with opensuse. Here we go:
This problem occurs on my freshly installed openSUSE 10.2 x86-64 system with
openoffice.org 2.2.1-43.1: I can't start spadmin for installing a printer.
Wha
All,
I have a few remote samba shares I want to mount from my desktop.
I have not found the magic method yet.
I looked in Yast - nothing, the opensuse wiki - nothing, google - lots
but it does not seem to work on my box.
FYI: Both the samba server and my desktop are opensuse 10.2 with
updates a
On Wed, 2007-08-29 at 11:12 -0300, Druid wrote:
> this is the exactly moment you should start reading the help for the
> command applydeltaiso, provided by deltarpm.rpm
>
> On 8/29/07, Art Fore <[EMAIL PROTECTED]> wrote:
> > I am not having any luck upgrading Beta1 to Beta2.
> >
> > I download the
Started this email with a problem with compiz, but think I found the
answer. When I would boot into suse level 5, I could no get the start
menu or do anything else other than right-click, and log out. I would go
to console session, the startx. Logout again, and do startx again, then
everything seem
On Wed, 2007-08-29 at 22:06 +0800, Art Fore wrote:
> I am not having any luck upgrading Beta1 to Beta2.
>
> I download the openSUSE-10.3-Beta1_Beta2-DVD-x86_64.delta.iso (via
> Ktorrent which is as slow as Christmas) and try to burn it with K3B. K3B
> comes up that it is not an iso image. Burn it
Erik Jakobsen wrote:
>
> Think you have downloaded the delta iso, that is the different between
> the Beta1 and Beta2.
> You have to link the delta iso to the Beta1 iso to get the full Beta2 iso.
> Se opensuse for further details.
>
>
The link for the help is to be found here:
http://en.opensus
this is the exactly moment you should start reading the help for the
command applydeltaiso, provided by deltarpm.rpm
On 8/29/07, Art Fore <[EMAIL PROTECTED]> wrote:
> I am not having any luck upgrading Beta1 to Beta2.
>
> I download the openSUSE-10.3-Beta1_Beta2-DVD-x86_64.delta.iso (via
> Ktorren
Art Fore wrote:
> So, any suggestion on howto update Beta1 to Beta2?
>
>
>
Think you have downloaded the delta iso, that is the different between
the Beta1 and Beta2.
You have to link the delta iso to the Beta1 iso to get the full Beta2 iso.
Se opensuse for further details.
--
Med venlig hilse
I am not having any luck upgrading Beta1 to Beta2.
I download the openSUSE-10.3-Beta1_Beta2-DVD-x86_64.delta.iso (via
Ktorrent which is as slow as Christmas) and try to burn it with K3B. K3B
comes up that it is not an iso image. Burn it anyway. Sure enough, it
will not boot.
Try doing online upda
> I have one PATA DVD & one SATA DVD. The system can't boot from the SATA
> DVD. 10.3b2 boots OK from the PATA DVD but then fails to load the
> installation catalogue, gives me a message in red & then goes to the
> manual install. Checking the boot logs I see that it is trying to find
> the cata
On Wednesday 29 August 2007 03:34, Adi Nugroho wrote:
> Dear all,
>
> Is there someone here has experience with Epson Stylus C87+?
> I am interested to this printer, but it is not (yet) listed in
> http://openprinting.org/
>
Huh?
http://openprinting.org/show_printer.cgi?recnum=Epson-Stylus_C87
h
On Tuesday 28 August 2007 22:44, Ladislav Slezak wrote:
> Kai Ponte napsal(a):
> > On Tuesday 28 August 2007 18:48, Fernando Costa wrote:
> >> Hi all,
> >>
> >> When I initially installed openSUSE 10.2, I choose all the default
> >> settings, big mistake, after that I realized that the default desk
On Wednesday 29 August 2007 02:59, Bogdan Cristea wrote:
> I have a html page with a search box using a php script. However the search
> facility does not work, each time I press enter a new window appears asking
> to open or save the file *.php. Is there something else I need to install
> in order
On Aug 29 2007 14:00, Marcus Meissner wrote:
>> > Or you could use 10.2 plus a 3rd-party 2.6.22. Webpin will tell.
>>
>> Webpin? I found http://benjiweber.co.uk:8080/webpin/
>>
>> Is that what you mean? What 3rd party kernel package does all the other
>> things needed to go from 2.6.13 to 2.6.2
On Wed, 2007-08-29 at 14:00 +0200, Marcus Meissner wrote:
> You can use the 2.6.22 kernel from 10.3 on 10.2. Only thing affected is likely
> udev/hal.
Seems like a big 'only thing' :)
--
Roger Oberholtzer
OPQ Systems / Ramböll RST
Ramböll Sverige AB
Kapellgränd 7
P.O. Box 4205
SE-102 65 Stoc
On Wed, Aug 29, 2007 at 01:58:51PM +0200, Roger Oberholtzer wrote:
> On Wed, 2007-08-29 at 12:48 +0200, Jan Engelhardt wrote:
> > On Aug 29 2007 08:09, Roger Oberholtzer wrote:
> > >On Tue, 2007-08-28 at 18:28 -0500, Rajko M. wrote:
> > >
> > >> I would rather install on another partition Beta 2 or
On Wed, 2007-08-29 at 12:48 +0200, Jan Engelhardt wrote:
> On Aug 29 2007 08:09, Roger Oberholtzer wrote:
> >On Tue, 2007-08-28 at 18:28 -0500, Rajko M. wrote:
> >
> >> I would rather install on another partition Beta 2 or wait few days for
> >> Beta3
> >> (Sept. 6th). That way you get all softwa
Hi,
I just updated to 10.3/x86 beta2 from beta1 using the DVD ISO.
Everything worked OK except for recognising the DVD during boot.
I have one PATA DVD & one SATA DVD. The system can't boot from the SATA
DVD. 10.3b2 boots OK from the PATA DVD but then fails to load the
installation catalogue, g
On 08/29/2007 09:20 AM, James Knott wrote:
> I was using RAID 5 and the installer refused to configure the boot loader.
>
RAID 5 I am not sure of.
>
> How would I get to Yast, when I couldn't install a bootable system?
>
Don't you install from Yast? I am pretty sure the configuration of the
Le Mardi 28 Août 2007 05:05, Kalvin Weng a écrit :
> Dear All,
>
> I want to install nvidia 7600GS on suse 10.0 I download the drive from the
> nvidia.com and install as the readme step by step ,but it failed something
> with the kernal version. Must I update the kernal version to the newest or
>
On Aug 29 2007 08:09, Roger Oberholtzer wrote:
>On Tue, 2007-08-28 at 18:28 -0500, Rajko M. wrote:
>
>> I would rather install on another partition Beta 2 or wait few days for
>> Beta3
>> (Sept. 6th). That way you get all software updated and if it doesn't work
>> well, there is good old 10.0 i
On 8/29/07, Roger Oberholtzer <[EMAIL PROTECTED]> wrote:
> On Tue, 2007-08-28 at 18:28 -0500, Rajko M. wrote:
>
> > I would rather install on another partition Beta 2 or wait few days for
> > Beta3
> > (Sept. 6th). That way you get all software updated and if it doesn't work
> > well, there is goo
Dear all,
Is there someone here has experience with Epson Stylus C87+?
I am interested to this printer, but it is not (yet) listed in
http://openprinting.org/
SInce *ussually* epson printer is working well in Linux, I need advise, if
this printer is working properly in openSUSE 10.2.
Thank you
Sorry: I wanted to say, that Leo Eraly was right, of course :-)
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
On Wednesday 29 August 2007, Bogdan Cristea wrote:
> Sorry, I was not clear enough. The web page is opened locally.
>
> On Wednesday 29 August 2007 13:10, you wrote:
> > Bogdan Cristea wrote:
> > > I have a html page with a search box using a php script. However the
> > > search facility does not w
Bogdan Cristea wrote:
Sorry, I was not clear enough. The web page is opened locally.
I assume this is the reason why it's not working
A php page is parsed on the server and sends the html and output to the
client ( = your browser).
from http://be.php.net/manual/en/introduction.php
...
Wha
Sorry, I was not clear enough. The web page is opened locally.
On Wednesday 29 August 2007 13:10, you wrote:
> Bogdan Cristea wrote:
> > I have a html page with a search box using a php script. However the
> > search facility does not work, each time I press enter a new window
> > appears asking
Bogdan Cristea wrote:
I have a html page with a search box using a php script. However the search
facility does not work, each time I press enter a new window appears asking
to open or save the file *.php. Is there something else I need to install in
order to have the php script working?
PHP
I have a html page with a search box using a php script. However the search
facility does not work, each time I press enter a new window appears asking
to open or save the file *.php. Is there something else I need to install in
order to have the php script working?
--
Bogdan Cristea
--
To uns
With respect to wlan and internet access I have had some success
with OS10.2 and so have
after a succession of DVD updating a remnant ifcfg-wlan0, now
evidently not entirely compatible
to OS10.3beta2.
There has however been no success in booting up the wlan ( in Li
Dňa Tuesday 28 August 2007 22:41:54 Robert Lewis ste napísal:
>
> Everytime I go to YaST and try to do an "Online Update Configuration"
> I get a failure and it does not complete. It says ERROR
> An error occured while connecting to the server. I press Details and I
> get back: Cannot list servic
69 matches
Mail list logo