Hi Guillaume,
Maybe even better, I got an u-boot log over the console.
U-Boot SPL 2019.01 (Aug 21 2019 - 17:22:46 +)
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
U-Boot 2019.01 (Aug 21 2019 - 17:22:46 +)
CPU: Altera SoCFPGA Platform
FPGA: Altera Cyclone V
Hi,
Am Freitag, 24. April 2020, 18:10:14 CEST schrieb Axel Braun:
> Am Freitag, 24. April 2020, 17:42:29 CEST schrieb Guillaume Gardet:
> > > -Original Message-
> > > From: Axel Braun
> > > Sent: 24 April 2020 17:33
> > > To: opensuse-arm@opensuse.org
> > > Subject: Re: [opensuse-arm] Ras
Hi Guillaume,
> Is your rootfs on mmc ?
Everything is on mmc. To copy the image to the mmc card I used the same
command with any image I tried.
xzcat openSUSE-...-ARM-JeOS-socfpgade0nanosoc.armv7lraw.xz | dd
bs=4M of=/dev/mmcblk0 iflag=fullblock oflag=direct; sync
> Do you have multiple
Am Freitag, 24. April 2020, 17:42:29 CEST schrieb Guillaume Gardet:
> > -Original Message-
> > From: Axel Braun
> > Sent: 24 April 2020 17:33
> > To: opensuse-arm@opensuse.org
> > Subject: Re: [opensuse-arm] Raspi4/Leap 15.2/wrong disk size
> >
> > Hello Fabian,
> >
> > Am Donnerstag, 23
> -Original Message-
> From: Axel Braun
> Sent: 24 April 2020 17:33
> To: opensuse-arm@opensuse.org
> Subject: Re: [opensuse-arm] Raspi4/Leap 15.2/wrong disk size
>
> Hello Fabian,
>
> Am Donnerstag, 23. April 2020, 11:13:34 CEST schrieb Fabian Vogt:
> > Am Mittwoch, 22. April 2020, 16:
Hello Fabian,
Am Donnerstag, 23. April 2020, 11:13:34 CEST schrieb Fabian Vogt:
> Am Mittwoch, 22. April 2020, 16:22:03 CEST schrieb Axel Braun:
> > Hi,
> > I'm trying the Raspi 4 image (openSUSE-Leap-15.2-ARM-LXQT-
> > raspberrypi4.aarch64-2020.02.26-Build1.63.raw.xz) updated to the latest
> > pa
Hi Alexander,
On 24/04/2020 10:22, Alexander Bergmann wrote:
> Hi Axel,
>
> On Wed, Apr 22, 2020 at 04:35:08PM +0200, Axel Braun wrote:
>> Am Mittwoch, 22. April 2020, 16:33:03 CEST schrieb Guillaume Gardet:
Is this an issue of the used image?
>>>
>>> The resize of the partition should happe
> -Original Message-
> From: Christian Gross
> Sent: 23 April 2020 10:24
> To: opensuse-arm@opensuse.org
> Subject: [opensuse-arm] Leap 15.1 does not boot on DE0-Nano-SoC
>
> Hi,
>
> If I try to boot openSUSE-Leap-15.1-ARM-JeOS-socfpgade0nanosoc.armv7l it
> ends up showing the u-boot pro
Hi Axel,
On Wed, Apr 22, 2020 at 04:35:08PM +0200, Axel Braun wrote:
> Am Mittwoch, 22. April 2020, 16:33:03 CEST schrieb Guillaume Gardet:
> > > Is this an issue of the used image?
> >
> > The resize of the partition should happen on first boot.
> > Would you have serial traces of the boot?
>
>
