I started experimenting.
Received the first incomprehensible situation:
There are three nodes. One of the quorum exists only, i.e. without a specific
pacemaker.
1. Run all the nodes - cluster is running. All rigth.
2. Disconnect of quorum nodes - cluster is running. (crm_mon partition with
The key was fine, but you nailed it on the mcast address. I thought it
had to match the mcast used by the cluster.
Many thanks! Now I can get back to learning. :)
digimer
On 06/18/2013 11:53 PM, Andrew Beekhof wrote:
Try the default multicast address perhaps?
address = 225.0.0.12;
You
Hi,
I have a project I'm working on and I'm stuck right now.
I'm building a cluster of 2 load balanced web server and I'm using
DRBD, OCFS2 and Pacemaker/Corosync.
My Problem is with configuring Pacemaker, the rest is working fine.
Here is the
On 2013-06-19T10:13:19, Andrey Groshev gre...@yandex.ru wrote:
I started experimenting.
Received the first incomprehensible situation:
There are three nodes. One of the quorum exists only, i.e. without a specific
pacemaker.
What do you mean by without a specific pacemaker?
What does your
19.06.2013, 17:27, Lars Marowsky-Bree l...@suse.com:
On 2013-06-19T10:13:19, Andrey Groshev gre...@yandex.ru wrote:
I started experimenting.
Received the first incomprehensible situation:
There are three nodes. One of the quorum exists only, i.e. without a
specific pacemaker.
What do
service cman start.
Thx,
CB
-Original Message-
From: Andrew Beekhof [mailto:and...@beekhof.net]
Sent: Tuesday, June 18, 2013 8:03 PM
To: The Pacemaker cluster resource manager
Subject: Re: [Pacemaker] Starting Pacemaker Cluster Manager: [FAILED]
On 18/06/2013, at 9:35 PM, Colin Blair
On Tue, Jun 18, 2013 at 01:06:36PM +0200, andreas graeper wrote:
the cleanup is doing the work.
it need to be done on both (all) nodes ?!
No, any node will do.
Thanks,
Dejan
2013/6/18 andreas graeper agrae...@googlemail.com
thanks a lot !
i just this minute came into such situation
Hi,
When I enter:
# crm configure
(... do some changes ...)
and enter
# crm(live)# ptest
The answer ist:
Could not parse configuration input from: input string
Nothing else. Any way to debug this? Ideas?
Environment
Plain Debian Wheezy. pacemaker 1.1.7-1 from the repositories.
--
Dr.
Hi ,
I can not make ‘ mount’ command on active node using IP-cluster
addresse - mount still uses real IP addresse the node got at
installation .
That breaks the access to external NFS storage from the active node.
All resources (drbd/fs/Ip-cluster/lsb-script) start successfully, the
On 2013-06-18T13:47:57, Nikita Michalko michalko.sys...@a-i-p.com wrote:
I tried build/compile the last version of pacemeker from sources
(http://blog.clusterlabs.org/blog/2013/release-candidate-1-dot-1-10-rc3/)
on SLES11/SP2 (kernel 3.0.58-0.6.2-default) with libqb-0.14.4 as follows:
Am Mittwoch, 12. Juni 2013, 10:08:39 schrieb Lars Marowsky-Bree:
On 2013-06-12T09:09:31, Michael Schwartzkopff mi...@clusterbau.com wrote:
Especially I would like to find out how many nodes are in a cluster and
how
many nodes are online. Perhaps somebody could post a code snipplet here.
All,
Anyone run into a NIC memory dump when Corosync is started on 2nd node?
Corosync starts fine on each node. When I start them at the same time, the
network is flooded and the NICs memory dump.
Ubuntu 11.10
Corosync 1.1.3
Thx,
CB
The information contained in this transmission may contain
- Original Message -
From: Jonathan-Marc Lapointe jmlapoi...@ccdmd.qc.ca
To: Pacemaker@oss.clusterlabs.org
Sent: Wednesday, June 19, 2013 8:21:03 AM
Subject: [Pacemaker] Errors in configuring cluster project with DRBD
and OCFS2, Help !
Hi,
I have a project I'm working on and
Hello All,
I have some 2-node active-passive clusters that occasionally lose Corosync
connectivity. The connectivity is fixed with a reboot. They don't have shared
storage so stonith doesn't have to happen for another node to take control of
the resource. Also they are VMs so I can't use a
I built a set of rpms for pacemaker 1.1.0-rc4 and updated my test cluster
(hopefully won't be a test cluster forever), as well as my VMs running
pacemaker-remote. The OS everywhere is Scientific Linux 6.4. I am wanting
to set some attributes on remote nodes, which I can use to control where
On 20/06/2013, at 6:33 AM, Doug Clow doug.c...@dashbox.com wrote:
Hello All,
I have some 2-node active-passive clusters that occasionally lose Corosync
connectivity. The connectivity is fixed with a reboot. They don't have
shared storage so stonith doesn't have to happen for another
- Original Message -
From: Lindsay Todd rltodd@gmail.com
To: The Pacemaker cluster resource manager Pacemaker@oss.clusterlabs.org
Sent: Wednesday, June 19, 2013 4:11:58 PM
Subject: [Pacemaker] Pacemaker remote nodes, naming, and attributes
I built a set of rpms for pacemaker
Hi Doug,
I have some 2-node active-passive clusters that occasionally lose
Corosync connectivity. The connectivity is fixed with a reboot.
They don't have shared storage so stonith doesn't have to happen for
another node to take control of the resource. Also they are VMs so I
can't use a
20.06.2013 00:36, Andrew Beekhof wrote:
On 20/06/2013, at 6:33 AM, Doug Clow doug.c...@dashbox.com wrote:
Hello All,
I have some 2-node active-passive clusters that occasionally lose
Corosync connectivity. The connectivity is fixed with a reboot. They
don't have shared storage so stonith
Ok, thank you for infos, Lars!
Best regards
Nikita Michalko
Am Mittwoch, 19. Juni 2013 17:17:50 schrieb Lars Marowsky-Bree:
On 2013-06-18T13:47:57, Nikita Michalko michalko.sys...@a-i-p.com wrote:
I tried build/compile the last version of pacemeker from sources
20 matches
Mail list logo