Support, have following suggestions...
Sec 1. Introduction
A PCE or a
PCC operating as a PCE (in hierarchical PCE environment) computes
paths for MPLS Traffic Engineering LSPs (MPLS-TE LSPs) based on
various constraints and optimization criteria.
I find 'PCC operating as a PCE' c
Support, have following suggestions.
Sec 3. Path Setup Type TLV
The one octet value contains the Path Setup Type
(PST). This document specifies the following PST value:
o PST = 0: Path is setup via RSVP-TE signaling protocol(default).
Can some PST value be reserved for experime
Support.
Brgds,DG
" I've had good seasons and some deeply painful ones. I've made some
spectacularly good choices and some outrageously bad mistakes. I'm very human -
a work in progress". - Robin Sharma
~
---
Hi,
A noticed a minor discrepancy of Flags definition between the
draft-ietf-pce-pce-initiated-lsp-01
And ietf-pce-stateful-pce
Referring sec 5.3.1 of pce-pce-initiated-lsp-01, following is the definition of
Create flag. And has
Only two bits assigned for operational state.
But the definition
PCE working group,
draft-ietf-pce-rfc7150bis is fixing a clash between an IANA allocation for RFC
7150 and an unallocated code point documented in a working group Internet-Draft
that had been picked up and used by multiple implementations.
Another clash has just been pointed out to me between RFC
