Thank you all who responded to my question. I am sorry I didn't reply
earlier, I was quite busy these few days.
I have been inside the spottie already (to clean and lube the shutter
spindles), but never yet under the top cover.
The battery chamber I checked first, then I checked the connection
u
On 1 Jul 2002 at 9:49, Peifer, William [OCDUS] wrote:
> These funny screws are used on lots of different Pentax cameras, and I've
> found an easy way to remove them I thought I'd share with anyone interested. I
> take a paperclip, then bend it so that both ends are straight, parallel, and
> space
Before removing the top, did you check the bottom? If it is like the SP,
there will be a contact for the battery compartment mounted on the casting.
Check this first.
If the meter does not respond at any shutter/film speed setting, then the
coil in the meter is open. I believe circuit is a bridge
On 30 Jun 2002 at 16:02, Frantisek Vlcek wrote:
> Hi,
>I wanted to check the expertise pool :) before I remove the top of
>my SP1000 (for checking nonfunctioning meter -hopefully just bad
>connection or cold solder joint or similar, in worst case burned
>coil). I have been inside
4 matches
Mail list logo
