I had to reset my router today. And then reconnect all my Squeezebox
and Google Home/Nest products. Right now, CastBridge can see all my
Google products,and I hear the tone when I direct music to one of them.
But after that no sound at all. The timer is running though. This is
true for the
Now the repo is shown and I could (re)activate LMSannounce without ans
problems. Thank you very much!
As far I could test (file and TTS), everything works fine. ;)
What I observed (also with LMS 7.9.3):
- If the desired player ain't reachable for LMS, another player is
chosen randomly.
-
mherger wrote:
> > Did you realise that if you set a playerâs DSTM settings to be
> LastMix
> > local files only that it actually will select and play Qobuz tracks
> if
> > you have OMLI switched on? Not sure whether the same applies to Spotty
> -
> > I think it might.
>
> That's by design -
zordaz wrote:
> Even greater ;-)
> These options aren't availabe when using a mobile browser isn't it? Some
> mobile browsers hide the notication bar, while others keep them visible.
> So far I haven't found a way to configure it.Yeah it is nice to have the
> navigation bar visible as well. I
slartibartfast wrote:
> Yes, it is in the application settings.
> [image:
> https://uploads.tapatalk-cdn.com/20200822/d99511d1ad80bec06e603b1c67a4c11e.jpg]
>
> Sent from my Pixel 3a using Tapatalk
Even greater ;-)
These options aren't availabe when using a mobile browser isn't
bpa wrote:
> IIRC if you try to pipe STDOUT from squeezelite - you get get problems -
> flow control, silence etc. Can't remember the detail but is has been
> tried before
>
> Do not use parec using STDIN is default - specify the pulseaudio input
> aka sink.
>
> Best to play squeezelite into
d6jg wrote:
> I have had a bit of a read and I see that pacrec can be configured to
> take input from STDIN. If I sent Squeezelite to STDOUT would that work I
> wonder.
> Thanks for the note about running as a service
IIRC if you try to pipe STDOUT from squeezelite - you get get problems -
I finally today got around to syncing an instance of Squeezelite with an
SB3 and LastMix threw a 24bit Qobuz track into the mix. Unfortunately it
was choppy on the SB3.
The ability for the bit rate to be dependent on the players capability
is still a massive step forward. Just not quite right
didjean wrote:
> Well, seeking fails. I can move the play bar, but it will stop playing
> and would move to the next song at one point of time.
Ok then that is expected as Boom (and SB3, transporter) fails to seek
flac streams. Ive made a fix for LMS 8.0 but that needs a bit of
collaboration
karlek wrote:
> I can't add the repo to my LMS 8.0.
> I've seen >
Code:
> > maxTarget="7.*"
> > when I oben 'the repo.xml'
> (https://www.nexus0.net/pub/sw/lmsannounce/repo.xml) in a browser.
> Could this be the reason why?
>
Most likely. I've
bpa wrote:
> Using pulseaudio - squeezelite cannot be run as a service unless
> pulseaudio is configured system wide. The normal and recommended config
> for pulseaudio is on a per user see
> https://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/WhatIsWrongWithSystemWide/
I
d6jg wrote:
> Thanks bpa. Thats somewhere to start.
Using pulseaudio - squeezelite cannot be run as a service unless
pulseaudio is configured system wide. The normal and recommended config
for pulseaudio is on a per user see
zordaz wrote:
> Great! Is it somehow possible to keep the notification bar of the device
> visible when using this wrapper/app?Yes, it is in the application settings.
[image:
https://uploads.tapatalk-cdn.com/20200822/d99511d1ad80bec06e603b1c67a4c11e.jpg]
Sent from my Pixel 3a using Ta
Paul Webster wrote:
> https://f-droid.org/en/packages/com.craigd.lmsmaterial.app/
Great! Is it somehow possible to keep the notification bar of the device
visible when using this wrapper/app?
*Living Room:* HifiBerry DAC+ Pro & piCorePlayer
*Attic:* HifiBerry DAC+ RCA & piCorePlayer
cpd73 wrote:
> Not currently, but you could just use a group player - then control the
> volume of that.
Awesome, I was not aware of that plugin. Thanks a bunch!
neco's Profile:
Paul Webster wrote:
> https://f-droid.org/en/packages/com.craigd.lmsmaterial.app/
Thanks
LMS server: O2 Joggler with Jivelite, Pi Zero W with PcP 6.0
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe
bpa wrote:
> Probably using pulseaudio and then using parec providing the source for
> icecast
Thanks bpa. Thats somewhere to start.
VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* - Joggler & SB3 -> Onkyo TS606 -> Celestion F20s
*Office* - Pi3+Sreen -> Sony TAFE320 -> Celestion F10s /
garym wrote:
> You'll get differing opinions on ethernet over powerline adapters. I
> think they tend to either work well or not work. In my own case, at my
> weekend cottage, I have my LMS server connected via powerline and one of
> the players connected via powerline. All has worked
Probably using pulseaudio and then using parec providing the source for
icecast
bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806
View this thread: http://forums.slimdevices.com/showthread.php?t=112809
Erm wrote:
> I hadn't thought of powerline, but it might be worth a go before I start
> drilling. The room is on the same circuit as the rest of the house so in
> theory it should work. Though I'd prefer not to spend another couple
> hundred if it's not 99% guaranteed. Plus I'm running out of
Erm wrote:
> I hadn't thought of powerline, but it might be worth a go before I start
> drilling. The room is on the same circuit as the rest of the house so in
> theory it should work. Though I'd prefer not to spend another couple
> hundred if it's not 99% guaranteed. Plus I'm running out of
bpa wrote:
> OK - all the symptoms are consistent with a really really bad wifi
> connection. Have you considered powerline.
I hadn't thought of powerline, but it might be worth a go before I start
drilling. The room is on the same circuit as the rest of the house so in
theory it should work.
Can anyone help?
Im looking for a way of piping Squeezelite output to an Icecast
server.
I can do it by using a players audio output into the input of the
Icecast server via Liquidsoap but Im looking for a method of doing it
without going analogue at any stage.
I can do it using Squeezelite
cpd73 wrote:
> the Material APK is now available on f-droid
Great to hear!
Pi4 4GB piCorePlayer with LMS and Squeezelite for USB; Pi3B+ (7"
Display, Hifiberry DAC+ Pro) piCoreplayer with Squeezlite/Jivelite for
Hifiberry and Bluetooth headphone; two Airport Express
castalla wrote:
> Where is it? Doesn't show for me ...
https://f-droid.org/en/packages/com.craigd.lmsmaterial.app/
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc), kcrw,
supla finland, abc australia, cbc/radio-canada and rte ireland
carsten_h wrote:
> Great to hear!
Where is it? Doesn't show for me ...
LMS server: O2 Joggler with Jivelite, Pi Zero W with PcP 6.0
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
philippe_44 wrote:
> You cannot seek or the seek fails and there is no sound?
Well, I can move the play bar, but it will stop playing and would move
to the next song at one point of time.
Transporter, Touch, SB3, SB2, Duet, Booms, Radios --- Ipeng & Material
--- LMS 8.0.0 - 1588799628 on
neco wrote:
> One thing I have been wondering about is volume control. I tried to
> search this thread but came up empty. So, is it possible to control the
> volume of all (linked) devices simultaneously? If it's not possible yet
> I think it would be a great feature and is the only thing I
Just registered an account on these forums to say that I am constantly
blown away by the Material Skin - both features and execution - it's
just lovely. :-)
One thing I have been wondering about is volume control. I tried to
search this thread but came up empty. So, is it possible to control
It's only taken about 4 months, but the Material APK is now available on
f-droid :)
*Material debug:* 1. Launch via http: //SERVER:9000/material/?debug=json
2. Open browser's developer tools 3. Open console tab in developer tools
4. REQ/RESP messages sent to/from LMS will be logged here.
30 matches
Mail list logo
