mbg wrote:
> Is there a complete list of ports that need to be opened for this plugin
> to function correctly?
>
> I just did a new install of LMS 8.3 on CentOS 9 and while I was able to
> get Shairtunes2W and ChromeCast bridge working by opening specific
> firewall ports, I wasn't able to get
ASenna04 wrote:
> Hello,
>
> I am trying to use the squeeze2upnp plugin to send HQPlayer ouput.
> Currently I have successfully setup the plugin as a Roon endpoint and
> this is enabling playback from Roon into Naim NDS. I want to send Apple
> Music through HQPlayer to the Naim NDS.
>
>
Is there a complete list of ports that need to be opened for this plugin
to function correctly?
I just did a new install of LMS 8.3 on CentOS 9 and while I was able to
get Shairtunes2W and ChromeCast bridge working by opening specific
firewall ports, I wasn't able to get this one going with
Cut-Throat wrote:
> Yes, eventually the problem just 'went away'..It seemed to take a
> few months though. Qobuz probably fixed something
Ok thanks for the feedback! That sounds promising. I did open a ticket
with Qobuz about it and hopefully it follows suit.
Greg Erskine wrote:
> I think socat is similar to netcat which is similar to nc. pCP has
> busybox nc installed. Type busybox to get a list of commands.
>
> pCP doesn't include bash by default, pCP uses sh. pCP doesn't include
> python by default, pCP uses microPython (with only a couple of
Beta 0.0.19d (via non-published repo)
- Added more EspaceRadio Group (France) stations, each under own top
level menu, many of which have their own sub-channels - JazzRadio.fr,
Alpes1, M Radio, Generations, La Radio Plus, La Radio Plus Alpes Du Sud,
ODS, RVA, Virage, Durance (although they have
I think socat is similar to netcat which is similar to nc. pCP has
busybox nc installed. Type busybox to get a list of commands.
pCP doesn't include bash by default, pCP uses sh. pCP doesn't include
python by default, pCP uses microPython (with only a couple of libs)
philippe_44 wrote:
> Does it do the same thing on iTunes?
Huh, I had no idea I could do airplay from my PC/iTunes. lol. But yes,
every device shows up as expected in iTunes on my PC.
superstar19's Profile:
BoomX2 wrote:
> install the SDT plugin manually.
Thanks for your reply, @BoomX2. I chose the manual install route shortly
after posting and everything's working well.
darwinesque's Profile:
scslite wrote:
> This is happening to me that had cropped up after I updated to the
> latest Material Skin. For me so far it's just in my Playlist folder in
> Qobuz. Everything is duplicated. The Qobuz app doesn't show
> duplicates.
>
> So if this is on Qobuz end not sure if they'd oblige
cpd73 wrote:
> Sorry, I don't use any streaming services so cannot directly help. Does
> the Default skin show the same issue? What about iPeng, SqueezeCtrl, or
> Squeezer?
>
> If you use Material's debug (see my sig) then you should be able to see
> if it is LMS that is sending the
PaulH wrote:
> To summarize (with the knowledge I have) , external communication it's
> not so easy as I thought :-(
>
> No issue for metadatas output.
>
> The only issue I founded to control the player is using the
> SqueezeButtonPi. Instead buttons I could connect it to digital outputs
>
bpa wrote:
> After looking at LMS CLI code - it just connects to a TCP port and
> expected line by line of text on a TCP port. The CLI code does not
> connect to a tty/serial device
> An RS232-Ethernet connection usually creates tty devices and this is
> irrelevant to the CLI plugin and nothing
kidstypike wrote:
> Thanks bpa, working here no problem.
Good to know.
Quality isn't great but it's free.
I think the number after the title is the number of items in the
playlist which are served up at random in groups of 32.
I'm not how well the lists are managed. The "Nordic Folk Songs"
Cool! I will update LMS and check during next week.
bonndias's Profile: http://forums.slimdevices.com/member.php?userid=43372
View this thread: http://forums.slimdevices.com/showthread.php?t=114611
cpd73 wrote:
> I never actually tried analysing on Linux then running on Windows - or
> even the other way around. [...] However, if you delete the jukebox file
> it is recreated from the DB contents, and this then works.
Users do crazy and unexpected things all the time, don't they?
I never
I have several new intents lined up for certification so now would be a
good time to tweak any misfirings in the voice model.
I find that Alexa often misunderstands me when I use the assume and
ungroup commands.
If you have any examples of commands that she often misunderstands for
you,
Thanks bpa, working here no problem.
36843
+---+
|Filename: Accu.jpg |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=36843|
bpa wrote:
> i* a serial server (e.g. nc601b type) - probably works but only if
> device is supported by PCP kernel but may need an extension for it.
> Still would need code on Arduino to login and issue CLI commands - same
> as my earlier suggestion
After looking at LMS CLI code - it just
DavidBulluss wrote:
> I have loaded the files in and restarted, nothing broken. Then I
> realised that I am using Squeeze CTRL, not Squeezer... not sure how to
> get to a menu that looks like the one on Squeezer, but I will endevour
> to see if there is.
>
> Cheers, David.
The plugin's audio
PaulH wrote:
> I'm ok with C but not with Linux.
if you can do C - python P erl , bash etc. is just a bit of reading.
> PCP is perfect for me. Restart perfectly after power supply failure,
> easy to use and efficient!
Limited.
I reckon if you could build *socat* for PCP a single command line
cpd73 wrote:
> All I want to do is convert from an LMS track URL to the URL to access
> the track on the service's website. So, for spotify LMS has
> "spotify://track:TRACK_ID" - Material then simply converts this to
> "https://open.spotify.com/track/TRACK_ID; This URL is then use when
>
bpa wrote:
> Much clearer.
>
> I don't know about PCP and as you are doing development, I'd start with
> LMS on a full Raspbian/Max2play system to have full flexibility rather
> than cut down piCore.
>
I'm ok with C but not with Linux.
PCP is perfect for me. Restart perfectly after power
Hi there,
I'm using AirPlay Bridge to integrate my Yamaha RX-V675 which is almost
working.
Only problem is, that my Receiver will be recognized by LMS/Plugin, if I
restart the server while the Yamaha is switched on.
If I switch the Yamaha off and on a little bit later it will be not
recognized
PaulH wrote:
> I hope I have made myself clearer. I should have started there!
Much clearer.
I don't know about PCP and as you are doing development, I'd start with
LMS on a full Raspbian/Max2play system to have full flexibility rather
than cut down piCore.
Once you have a workign system, then
bpa wrote:
> You have not described your use case.
>
> I think you are over complicating things.
>
>
Your are right, I had to explain first how I would like to use
Picoreplayer.
I would like to integrate it on my small home made home automation. It's
using Arduino,
Accuradio now seems to play M4A streams and so LMS support is required.
Because of an Accuradio M4a format pecularity, *this plugin requires LMS
8.3.0 - 1642205175 @ Sat Jan 15 or later.*
As plugin requires a very up to date version of LMS, I have not yet put
the plugin into LMS 3rd party
PaulH wrote:
> 36836
>
> You are right it's to control the Logitech Transporter (I never saw this
> unit)
>
>
> Otherwise I'm not able to write any program on Linux :-(. Maybe I can
> use an RS232 -> IP converter. It's probably working to send any basic
> commands (play, stop,). For
36836bpa wrote:
> IIRC = No. I think it was about control of amps - LMS to device - you
> want a device to LMS.
>
You are right it's to control the Logitech Transporter (I never saw this
unit)
Otherwise I'm not able to write any program on Linux :-(. Maybe I can
use an RS232 -> IP
cpd73 wrote:
> All I want to do is convert from an LMS track URL to the URL to access
> the track on the service's website. So, for spotify LMS has
> "spotify://track:TRACK_ID" - Material then simply converts this to
> "https://open.spotify.com/track/TRACK_ID; This URL is then use when
>
PaulH wrote:
> I discovered that there is a RS232 plugin in the LMS plugin
> But I didn't find any documentation.
> Could this do the trick?
IIRC = No. I think it was about control of amps - LMS to device - you
want a device tpo LMS.
Look at the readsq.py application - it deal with CLI
I discovered that there is a RS232 plugin in the LMS plugin
But I didn't find any documentation.
Could this do the trick?
PaulH's Profile: http://forums.slimdevices.com/member.php?userid=72449
View this thread:
All I want to do is convert from an LMS track URL to the URL to access
the track on the service's website. So, for spotify LMS has
"spotify://track:TRACK_ID" - Material then simply converts this to
"https://open.spotify.com/track/TRACK_ID; This URL is then use when
copying track details and also
mherger wrote:
> What exactly are you trying to do? Context is hard to find in this
> lengthy thread...
All I want to do is convert from an LMS track URL to the URL to access
the track on the service's website. So, for spotify LMS has
"spotify://track:TRACK_ID" - Material then simply converts
https://tidal.com/browse/track/95570766
...
wimp://(playlist|album|):?([0-9a-z-]+)
wimp://123.mp3 (or .flac)
So, "wimp://TRACK.EXT" => "https://tidal.com/browse/track/TRACK;
I somewhat forgot about the context... left is the LMS internal URI
schema, right is "official". The plugin can go
prabbit wrote:
> After numerous retries I finally got through analyzing all of my files.
> As a reminder, I analyzed my files using Ubuntu on Windows to get the
> high-level analysis. I see that data in the library.db file. I also see
> a jukebox file.
>
> I am attempting to start the API
mherger wrote:
> https://tidal.com/browse/track/95570766
> ...
> wimp://(playlist|album|):?([0-9a-z-]+)
> wimp://123.mp3 (or .flac)
So, "wimp://TRACK.EXT" => "https://tidal.com/browse/track/TRACK;
mherger wrote:
>
> https://www.deezer.com/track/531514321?...
> ...
> deezer://123.mp3 (or
paul- wrote:
> When using the mobile layout, what decides if a dropdown list(Like the
> player list) uses a scroll bar, or just uses a gesture to swipe in the
> list.
>
> I'm playing with using the 7" RPI display and Xorg
>
> Firefox shows a scollbar to navigate in the list
> Epiphany uses a
38 matches
Mail list logo
