On Thu, Jan 07, 2016 at 10:31:49PM +, Gomes, Rich wrote:
> Is there additional configuration that needs to be done for mail-enabled
> Public Folders?
> They all come back with:
>
> Recipient address rejected: User unknown in relay recipient table
What does the LDAP data for a mail-enabled
...@postfix.org [mailto:owner-postfix-us...@postfix.org]
On Behalf Of Gomes, Rich
Sent: Tuesday, January 05, 2016 10:28 PM
To: postfix users <postfix-users@postfix.org>
Subject: RE: ldap validate
It's not so much what is missing as there is no in between Smtpd -v just gives
so much per trans
On 1/5/2016 1:22 PM, Gomes, Rich wrote:
> Does this imply an actual list\map?
>
> " and list the valid recipients in relay_recipient_maps"
>
relay_recipient_maps = ldap:/path/to/file
>
> I am looking to do real-time LDAP lookups.
>
> The only time I get it to work is when using virtual
ostfix.org
Subject: Re: ldap validate
On 1/4/2016 3:37 PM, Gomes, Rich wrote:
> So I should change the config to use relay domains instead of virtual mailbox?
You previously wrote that these domains were defined in relay_domains (which
they should be).
Don't define domains in more than one add
-us...@postfix.org]
On Behalf Of Noel Jones
Sent: Tuesday, January 05, 2016 3:04 PM
To: postfix-users@postfix.org
Subject: Re: ldap validate
On 1/5/2016 1:50 PM, Gomes, Rich wrote:
> Ok, my bad that does work in fact.
> I had shut off smtpd -v in master.cf so I was not seeing the ful
On 1/5/2016 1:50 PM, Gomes, Rich wrote:
> Ok, my bad that does work in fact.
> I had shut off smtpd -v in master.cf so I was not seeing the full LDAP
> queries.
>
> However it will only validate the default domain even though I have more than
> one domain listed in relay_domains.
> Is it
info.
Somewhere between smtpd and smtpd -v would be about right
-Original Message-
From: owner-postfix-us...@postfix.org [mailto:owner-postfix-us...@postfix.org]
On Behalf Of Noel Jones
Sent: Tuesday, January 05, 2016 5:39 PM
To: postfix-users@postfix.org
Subject: Re: ldap validate
On 1/5
On 1/5/2016 2:32 PM, Gomes, Rich wrote:
>
> I'll also need to see if I can filter the logs, smtpd -v gives way too much
> while without the -v gives way too little
I can't remember the last time I needed verbose logging, even to
debug a problem.
What is missing from the normal logging you need
?
Or somewhere else?
-Original Message-
From: owner-postfix-us...@postfix.org [mailto:owner-postfix-us...@postfix.org]
On Behalf Of Noel Jones
Sent: Tuesday, January 05, 2016 2:33 PM
To: postfix-users@postfix.org
Subject: Re: ldap validate
On 1/5/2016 1:22 PM, Gomes, Rich wrote:
> Does this im
: Re: ldap validate
On 12/30/2015 12:35 PM, Gomes, Rich wrote:
> My postfix install is quite vanilla.
> Other than inet_interfaces, and the ldap config, I change the following:
>
> Mydomain
> Myorigin
> Relayhost
>
>
Carefully study the following, especially the part
Message-
From: Gomes, Rich
Sent: Monday, January 04, 2016 1:48 PM
To: postfix-users@postfix.org
Subject: RE: ldap validate
I have read over the suggested documentation and I have some questions. But
perhaps it would be good to break down my goals here first.
First by the postfix\relaying part
On 1/4/2016 12:47 PM, Gomes, Rich wrote:
> I have read over the suggested documentation and I have some questions. But
> perhaps it would be good to break down my goals here first.
> First by the postfix\relaying part, then by the validation.
>
> Years ago I used qmail on the 'nix side but since
Subject: Re: ldap validate
On 1/4/2016 3:11 PM, Gomes, Rich wrote:
> Ok, I have LDAP working in stream although still have a few bugs.
>
> I found this article:
>
> http://www.experts-exchange.com/questions/28251757/How-to-configure-LD
> AP-Authentication-for-Incoming
On 1/4/2016 3:11 PM, Gomes, Rich wrote:
> Ok, I have LDAP working in stream although still have a few bugs.
>
> I found this article:
>
> http://www.experts-exchange.com/questions/28251757/How-to-configure-LDAP-Authentication-for-Incoming-SMTP-Traffic.html
>
>
> Basically I added these lines
>
postfix.org] On Behalf Of Noel Jones
> Sent: Monday, January 04, 2016 4:32 PM
> To: postfix-users@postfix.org
> Subject: Re: ldap validate
>
> On 1/4/2016 3:11 PM, Gomes, Rich wrote:
>> Ok, I have LDAP working in stream although still have a few bugs.
>>
>>
On 12/30/2015 11:22 AM, Gomes, Rich wrote:
> I have a couple of question about LDAP verification.
>
> I followed this guide as I am using AD as LDAP source:
>
> http://blog.yenlo.com/nl/using-postfix-ldap-search-against-active-directory
>
>
> This works perfectly until I am sending mail to the
On 12/30/2015 11:56 AM, Gomes, Rich wrote:
> Thanks, not using address rewrites
>
> I am not sure which question you are answering when you listed the following:
>
> users in local domains defined in $mydestination are listed in
> local_recipient_maps
> users in domains defined in
I have a couple of question about LDAP verification.
I followed this guide as I am using AD as LDAP source:
http://blog.yenlo.com/nl/using-postfix-ldap-search-against-active-directory
This works perfectly until I am sending mail to the postfix server, then it
accepts the mail and passes with
: Wednesday, December 30, 2015 12:53 PM
To: postfix-users@postfix.org
Subject: Re: ldap validate
On 12/30/2015 11:22 AM, Gomes, Rich wrote:
> I have a couple of question about LDAP verification.
>
> I followed this guide as I am using AD as LDAP source:
>
> http://blog.yenlo.com/n
, December 30, 2015 1:28 PM
To: postfix-users@postfix.org
Subject: Re: ldap validate
On 12/30/2015 11:56 AM, Gomes, Rich wrote:
> Thanks, not using address rewrites
>
> I am not sure which question you are answering when you listed the following:
>
> users in local domains defined in
On 12/30/2015 12:35 PM, Gomes, Rich wrote:
> My postfix install is quite vanilla.
> Other than inet_interfaces, and the ldap config, I change the following:
>
> Mydomain
> Myorigin
> Relayhost
>
>
Carefully study the following, especially the parts about "valid
addresses."
21 matches
Mail list logo
