just picked up a 3400c, nice machine!! had a few Qs:
- any way to fix one of the elevation feet that still springs but doesn't
lock
- running 8.6, just curious which versions of NESTCAPE and IE seem to run
the best
BTW, lots of good info in the archive
plans underway to pick up a 128M and a
And I can get the case to close and everything but I just need to find
a way to connect a ADB Keyboard to it without using a dock. Becuase the
innards to the dock will not fit into the case. What can i do?
Why in gods name are you doing this? The 280c is a lovely little laptop
that isn't to
I don't like netscape too much, although I still keep it around, and I
refuse to use anything that comes out of Microsoft.
I mostly use iCab, www.icab.de
Its a great web browser that is currently in development for 68k, Classic
PowerPC, and OSX all at the same time.
Anyway they come out with a
just picked up a 3400c, nice machine!! had a few Qs:
- any way to fix one of the elevation feet that still springs but doesn't
lock
- running 8.6, just curious which versions of NESTCAPE and IE seem to run
the best
BTW, lots of good info in the archive
plans underway to pick up a 128M and a
My problem:
The [GV ethernet/modem] card appears on the desktop, all its extensions are
operative, but
AppleTalk absolutely refuses to connect via Alternate Ethernet
Dan asked:
Did you use the installer or just manually copy the extensions to the new
PB? I can't recall specifically about the
On Thursday, March 13, 2003, at 05:32AM, jim page [EMAIL PROTECTED] wrote:
just picked up a 3400c, nice machine!! had a few Qs:
plans underway to pick up a 128M and a larger drive, that is unless anyone
has any they are selling. if so contact me off list
For the 128-mb RAM module you can
on 3/13/03 8:57 AM, Bryan Kattwinkel at [EMAIL PROTECTED] wrote:
Did you use an installer program for the GV card? Non-Apple ethernet
drivers are typically not separate files or extensions but resources in
the System file.
Yes I did; the one that came with the card.
That message appears
Netscape 4.75
I prefer Mozilla 1.0.1 on my pb1400c, runs great and surfs faster than any
other browser I have installed. Takes longer to start up than the others but
is extremely stable.
Tabbed browsing is a must on a 800x600 11.3 inch screen. 1 window holds all
my browser pages in nice neat
jimwg wrote:
Greetings!
I am using my Powerbook 190 as a backup drive (after tossing
my doggie Orb drive!) for my 6320 via file sharing and the backup
program Synk.
Can anyone give recommendations on how to squeeze the most
file sharing speed from either system (OS 9.1 on
Can anyone give recommendations on how to squeeze the most
file sharing speed from either system (OS 9.1 on 6320, OS 8.1 on PB
190) ?
YIKES! 8.1 on a PowerBook 190? Absolutely horrible combination. I had
that on my 190 for a whole two days (just this past weekend actually) and
dropped back
I probably should have mentioned that the below reason is not really why
I dropped down to 7.5.5, but mostly because 8.1 felt so sluggish and I
want my 190cs to feel as peppy as possible.
My whole disk access spiel is just my thoughts relating to the
originator's question.
Speedometer
I'm running 9.1 on my 1400 with a G3 233mhz NuPower card. No problems so
far. Its been 3 days now, I switched for compatibility with my Jag equipped
G4 (too many lost connections in 8.6). Its rock solid. I did notice that
many apps launched ve slowly the first time. Subsequent relaunches
Thanks John, that's awesome to hear.
Now, the question is, where do I get OS 9.1? Is this something I have to buy or is
it downloadable yet? I know -- that's a stupendously lazy question of me. =-)
I may need to upgrade to 9x for my new wireless card to work... not sure about that,
have a tech
On 3/13/03 jim page [EMAIL PROTECTED] wrote:
just picked up a 3400c, nice machine!! had a few Qs:
- any way to fix one of the elevation feet that still springs but doesn't
lock
The catch inside the foot itself is broken, that's why it won't stay
latched. You need to replace just the foot, the
I'm interested in the Epson 5200 3x1 printer but I'm running only 8.6
on a PB3400.
I understand that I can make the USB connection.
But, documentation indicates OS 9.1 minimum.
I'm wondering if there is a software tweek that would render the
Epson useable through my PB.
Any suggestions, or
- running 8.6, just curious which versions of NESTCAPE and IE seem to run
the best
netscape 4.8 and IE 5.1 and make sure to trash old IE extensions that
are NOT used by other programs (pagemaker or outlook for example)
my friend has a 3400 and she runs them on that, another neat trick is
to
Command-Shift-K at the installer window will get you to the option to do a Clean
Install in system 7.5.x and 7.6.x. It's not necessary to do the System Folder rename
(it is necessary for older OS versions, IIRC).
Ref.: http://docs.info.apple.com/article.html?artnum=16095
Scroll down about
Recent discussion here reminded me of the great deal on these at DMS, so
naturally I bought two. Well, at the introducory price that would have
been about $800, but nowadays it's only $7.95 each. : -)
The 5300 into which I installed has an old 1.3 gig drive upon which I
recently installed 8.6
Hi, all,
I happily received a new replacement battery for my 1400cs this week
and I am having some trouble charging it. I know that it can take a
couple of times of charging, discharging and recharging for it to reach
full capacity. I'll describe problems below and try to be brief. I
apologize
They're not compatable with anything later than 8.1, AFAIK..
But then, I don't really know that running 8xx is the best thing on a 5300...
my $.02
Dave
In a message dated 3/13/03 7:36:05 PM, you wrote:
Recent discussion here reminded me of the great deal on these at DMS, so
naturally I
Hey Dana et. al.,
Yes, fortunately, I just received it and the battery has a year warranty, so if
this turns out to be a big waste of my time I can return it. Whew!
I am being patient with the process... Every time I put the new battery back in
to charge I am getting more white bars at first...
They're not compatable with anything later than 8.1, AFAIK..
But then, I don't really know that running 8xx is the best thing on a 5300...
my $.02
Dave
FUD.
Mine works fine on my 5300ce under OS 8.6. Well, the ethernet does,
anyway. There ARE documented bugs using the video portion of the
How do I get an adb port out of a duo without using a dock?
josh
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras start at $299 | Free iBook! |
Support
I have a 280c and on the mother board is a rectangular connection for
the lcd display do any other powerbooks use this type of connection?
josh
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
-- Canon
Good to hear about the warranty, Aly -
As mentioned, I'm new to Powerbooks also; veyeran colleagues are consistent
in mentioning the power manager reset button (on the back of the unit), if
that helps you at all. Worst comes to worst, surely eBatts would offer you
even some nominal tech support or
Does the powerbook 3400c have an internal ethernet. I've been using it
with dial up (road worrior) on weekends when i'm away from home. I want
to connect it to my home LAN via ethernet since I use DSL. TIA.
Peter.
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog
Hello,
I'm a little confused with your problem... I have 'white bars' appear in the
control strip when the battery is less than completely full, and when I
first plug a battery in, it is completely white, then quickly turns to grey,
once it realises the battery is charged (I think the OS assumes
At 12:32 AM 3/14/2003 +, you wrote:
Hi Josh,
I'm a new 280c owner myself, but I'll take a stab..
I'm going to bet the answer is you don't.
There is a way to do it, actually. You take the blank power card (IE, the
non-modem thingy with the power switches on it) and attach a spare ADB port
to
28 matches
Mail list logo