Ok, i've done all these steps, but the thing doesn't work
I've also disassembled a duo 2300c and installed the ide-cf adapter to
see if it works, but it seems that i've found further problems: it
doesn't boot from a floppy!!! I've tried 8.0 install disk 2, but crashes
while loading the
Hi How are you using the drive
A. as a single drive connected to the ide of the 2300.
B. as a dual drive connected to the ide of the 2300 with a drive
connected to the scsi of the 2300.
C. connected to the ide side of the scsi to ide adapter connected to
the scsi side of the duo
If you
FWIW, I use 700 MB / 80 min Memorex 52X media burned at 48X in my
iomega USB 2 burner. My 1400cs 166, 12X CD ROM reads them fine.
Rick :)
On Feb 3, 2006, at 5:53 PM, Dan K wrote:
I've had very poor luck with 700MB disks in older CD-ROM drives of all
sorts, so I wouldn't be too hopeful about
My Reply follows quote. On 03/02/2006 18:22 [EMAIL PROTECTED] said:
Does anyone know where I would get the system enabler to use system
7.5.3 on my PB 1400, I am pressed for cash and I have 8.1 on it right
now, and would like to decrease the footprint of the OS for the moment.
Thanks in
Does the 240mhz version have faster internal video than the 180mhz?
I was reading a benchmark somewhere and they comapred a 180mhz,
240mhz, and a 180mhz upgraded to G3, and the 240mhz still had faster
video than the G3, although everything else was slower.
Can anyone confirm or reject
Hi,
Has anyone here every managed to send pictures via the infrared port
from a PowerBook 3400 to a Kodak digital picture kiosk at a photo lab?
I know of a nearby store with one that has Infrared capability for
tranfering from camera phones and I'm really curiouse about whether I
could do
If it's possible it would be really hard to do. The IR port on PBs
only support IRTalk, I know no other programs that use the IR Port on
PBs
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Enter To Win A |
-- Canon PowerShot
If it's possible it would be really hard to do. The IR port on PBs
only support IRTalk, I know no other programs that use the IR Port on
PBs
3400s were IrDA, earlier models were IRTalk only.
--
Best wishes
Malcolm Cornelius - The Powerbook Fanatic
http://www.pbfanatic.co.uk
--
Is it not on the 7.5.3 disk?
Roy
- Original Message -
From: [EMAIL PROTECTED]
To: PowerBooks powerbooks@mail.maclaunch.com
Sent: Friday, February 03, 2006 8:22 PM
Subject: 7.5.3 on PB 1400
Does anyone know where I would get the system enabler to use system
7.5.3 on my PB 1400, I am
Vicki wrote:
Its vicki here in the UK i have been trying to get the duo 2300 to
see a compact flash wifi card using the internal ide connector
linked to a compact flash to ide adapter.
which prompted Tom Peters [EMAIL PROTECTED] to write:
Thats a neat idea. I wonder why it doesnt work ?
You really aught to try 7.6.1... as this site describes why: http://
www.system7today.com/
7.6.1 gives you the smaller footprint of Mac OS 7, but allows you to
use a lot of newer Mac OS 8-era software such as Internet Explorer 5.
I can never get enough of advocating 7.6.1 - I put that site
Drew Kershaw [EMAIL PROTECTED] chimed in:
Probably because there are no drivers for the CF wireless card. I
doubt it would even work in a PowerBook w/ a PC card slot.
I bet a supported-chipset CF wifi adapter in a PCcard adapter would work
in a PowerBook's card slot BTW, though I have no
Hi Dan
The cf wifi card i got was a wsgo for a pda, I have tried the card in
my 2400 in a pcmcia cf adapter but no luck I will keep trying to see
if i can get the card even seen by the system and report back to the
list.
vicki
On Feb 5, 2006, at 4:22 AM, Andrew Kershaw wrote:
Drew
13 matches
Mail list logo