In a message dated 10/09/02 16:46:33 GMT Daylight Time, [EMAIL PROTECTED] writes:
Hi Rich,
It was Ken Brickwood who was bringing the Level 2 ROMs etc to Byfleet.
I can always refund you for the ROM if you like, maybe the trump card is a version that is incompatible with Level 2 - I know there
I currently keep an old Phillips Monitor for use with:
- Standard QL
- Atari Mega ST
- Amiga A-500 Plus
I also have the special Atari Mono monitor for use with the Mega ST.
I would like to release space, so can I wire up a modern Multi-Sync monitor
for use with these machines instea
At 03:40 ìì 11/9/2002, you wrote:
>Phoebus, my Minis-QL Aurora system sometimes fails to start. The cure
>is to remove or clean contacts on the EPROM cartridge which contains
>the SuperHErmes code. As it's a RomDisq in your case, I doubt it's
>this but this does seem to be the one thing not trie
Hello all,
I need some help to traslate Movep instruction, is it
correct what i did in the following example ?
Original instruction :
movep.l 0(a4),d1
New instructions to replace the movep:
move.b 0(a4),d1
lsl.l #8,d1
move.b 2(a4),d1
lsl.l #8,d1
move.b 4(a4),d1
lsl.l
Fabrizio Diversi wrote:
> I need some help to traslate Movep instruction, is it
> correct what i did in the following example ?
Yes.
> What is the equivalent of :
>
> movep.w d0,0(a5) ?
move.bd0,(a5)
lsr.l #8,d0
move.bd0,2(a5)
Viewed from the hardware on the bus both codes are no
Phoebus Dokos writes:
<>
>... The systems starts fine
>but once you spend 3 to 4 minutes it hopelessly crashes...
>Something heats up and that something I haven't found yet...
>My next move will be to get zero temp. spray to start
>spraying one by one the chips to see if the system will last
>lo
Hi, I tried on my Aurora/sgc/supherme/qubide
setup, to make a list of tables using
Paragraph.
It siezed up so many times, I did the
list using Paragraph on QPC2, and it was very stable.
I saved my work to floppy, and loaded
it into the Aurora for printing,
every time I tried to load it
A few months after the old web site at geocities was discontinued, I managed
to move it to a new address:
http://users.infoconex.com/daniele/q-emulator.html
Registered users of the Windows version can download an update from:
http://users.infoconex.com/daniele/winql.html
Dan