Re: [ql-users] QPC Keyboard

2005-01-18 Thread Geogwilt
In a message dated 15/01/05 15:30:00 GMT Standard Time, [EMAIL PROTECTED] writes: [EMAIL PROTECTED] wrote: Has anybody noticed that the various combinations with CAPS such as CAPS/SHIFT/ALT etc do not work with recent versions of SMSQE on QPC2 and on Q40/Q60? The combination DOES work with

Re: [ql-users] QPC Keyboard

2005-01-18 Thread Geogwilt
In a message dated 15/01/05 19:04:17 GMT Standard Time, [EMAIL PROTECTED] writes: George writes: I have also produced a private keyboard table loaded by KBD_TABLE which to some extent allows the two uses of the number pad. Holding down Alt Gr makes the num pad act as though Num lock was

Re: [ql-users] QPC Keyboard

2005-01-18 Thread Marcel Kilgus
[EMAIL PROTECTED] wrote: There are 8 combinations of CAPS with the presence of one or more of SHIFT, CONTROL and ALT (including just CAPS on its own. The seven combinations are all supposed to give rise to ASCII characters, ie they are part of the set where ALT adds '1' to the value of the key

Re: [ql-users] QPC Keyboard

2005-01-18 Thread Geogwilt
In a message dated 18/01/05 17:01:48 GMT Standard Time, [EMAIL PROTECTED] writes: Of course I could do my own Capslock state, but then the state wouldn't be reflected anymore by the Capslock LED, which would probably be pretty confusing. Marcel But on the Q40/60 you can't have LED

Re: [ql-users] QPC Keyboard

2005-01-16 Thread ian . pizer
YES, Marcel, that is exactly what I have! What next? Ian -- Message original -- Date: Sat, 15 Jan 2005 16:24:32 +0100 From: Marcel Kilgus [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [ql-users] QPC Keyboard Cc: Reply-To: [EMAIL PROTECTED] Wolfgang Lenerz wrote: azerty (french

Re: [ql-users] QPC Keyboard

2005-01-16 Thread ian . pizer
Jon, you are right, it is a Swiss keyboard. I would be glad to use your work when finished. But if you can do it maybe I can too. How do you do it, is it frantically difficult? Ian -- Message original -- From: Dent [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [ql-users] QPC Keyboard

Re: [ql-users] QPC Keyboard

2005-01-16 Thread Dilwyn Jones
[EMAIL PROTECTED] wrote: Has anybody noticed that the various combinations with CAPS such as CAPS/SHIFT/ALT etc do not work with recent versions of SMSQE on QPC2 and on Q40/Q60? The combination DOES work with SuperGold Card + Super Hermes because Super Hermes has its own keyboard routine I

Re: [ql-users] QPC Keyboard

2005-01-16 Thread Tony Firshman
On Sun, 16 Jan 2005 at 17:02:39, Dilwyn Jones wrote: (ref: [EMAIL PROTECTED]) snip In QPC2, these codes are not returned if you use something like PRINT CODE(INKEY$(-1)) and so programs like Perfection from Digital Precision have problems because they actually use these keycodes 224 to 231. I

Re: [ql-users] QPC Keyboard

2005-01-15 Thread Geogwilt
In a message dated 14/01/05 20:08:48 GMT Standard Time, [EMAIL PROTECTED] writes: I have also produced a private keyboard table loaded by KBD_TABLE which to some extent allows the two uses of the number pad. Holding down Alt Gr makes the num pad act as though Num lock was off. How

Re: [ql-users] QPC Keyboard

2005-01-15 Thread ian . pizer
are in English. I have tried 1 and 33 and 44 even 49 as mentioned above and do not get success. I wonder why my Configueration page of QPC2 is in French. Perhaps I should get it in English. But how? -- Message original -- To: [EMAIL PROTECTED] Subject: Re: [ql-users] QPC Keyboard Date: Fri, 14 Jan

Re: [ql-users] QPC Keyboard

2005-01-15 Thread ian . pizer
Yes I have done that but no success. My QPC2 Config page is in French. Perhaps I should have it in English? -- Message original -- From: Wolfgang Lenerz [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: Fri, 14 Jan 2005 17:53:19 +0100 Subject: Re: [ql-users] QPC Keyboard Cc: Reply-To: [EMAIL

Re: [ql-users] QPC Keyboard

2005-01-15 Thread Marcel Kilgus
[EMAIL PROTECTED] wrote: I presume there are only 2 ways of changing the kbd; either I set in Configuration QPC2 page, the CODE de Pays as 1 or 33 or 44 etc. and I set QBD_TABLE in my boot as the same chosen number. I do not know of any other way of affecting the keyboard. There is none. If

Re: [ql-users] QPC Keyboard

2005-01-15 Thread Wolfgang Lenerz
On 15 Jan 2005 at 15:24, [EMAIL PROTECTED] wrote: Yes I have done that but no success. My QPC2 Config page is in French. Perhaps I should have it in English? I think the language depends on the coutry you're in. Let's hgetthis is the clear: the first aplha row of your keyboard is what:

Re: [ql-users] QPC Keyboard

2005-01-15 Thread Marcel Kilgus
Wolfgang Lenerz wrote: azerty (french) qwerty (english) azertz (german)? The last one should be qwertz, surely. Asked another way, is it perhaps this layout: http://www.microsoft.com/globaldev/keyboards/kbdsf.htm (probably only properly viewable with internet explorer, go with the mouse over

Re: [ql-users] QPC Keyboard

2005-01-15 Thread Marcel Kilgus
[EMAIL PROTECTED] wrote: Has anybody noticed that the various combinations with CAPS such as CAPS/SHIFT/ALT etc do not work with recent versions of SMSQE on QPC2 and on Q40/Q60? The combination DOES work with SuperGold Card + Super Hermes because Super Hermes has its own keyboard routine I

Re: [ql-users] QPC Keyboard

2005-01-15 Thread Dent
Wolfgang Lenerz wrote: If you have a french keyboard: Forget Cueshell. exec QPC with the shift button held down to get the config window. Set code du pays to 33. Then hit the sauver button! Now do OK. AND CHECK your boot file for a line such as kbd_table xx. If this is present,

Re: [ql-users] QPC Keyboard

2005-01-15 Thread P Witte
George writes: I have also produced a private keyboard table loaded by KBD_TABLE which to some extent allows the two uses of the number pad. Holding down Alt Gr makes the num pad act as though Num lock was off. How difficult would it be to add Minerva's 'Compose' keystrokes? You know,

Re: [ql-users] QPC Keyboard

2005-01-15 Thread ian . pizer
PROTECTED] Date: Sat, 15 Jan 2005 16:13:42 +0100 Subject: Re: [ql-users] QPC Keyboard Cc: Reply-To: [EMAIL PROTECTED] On 15 Jan 2005 at 15:24, [EMAIL PROTECTED] wrote: Yes I have done that but no success. My QPC2 Config page is in French. Perhaps I should have it in English? I think

Re: [ql-users] QPC Keyboard

2005-01-14 Thread Malcolm Lear
I thought it was only me! Since using XP I've not been able to get the config menu up using the shift key. I have now set it to always show. But you do have to get to the menu to set that option. Malcolm [EMAIL PROTECTED] wrote: Terrific. What ignorance on my part. I tried as you said but that

Re: [ql-users] QPC Keyboard

2005-01-14 Thread ian . pizer
PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [ql-users] QPC Keyboard Cc: Reply-To: [EMAIL PROTECTED] I thought it was only me! Since using XP I've not been able to get the config menu up using the shift key. I have now set it to always show. But you do have to get to the menu to set that option

Re: [ql-users] QPC Keyboard

2005-01-14 Thread Rich Mellor
On Fri, 14 Jan 2005 17:22:31 +0100, [EMAIL PROTECTED] wrote: I have managed to configure smsqe.bin by using Cueshell so I can choose the language. I have also tried out Code du Pays in the Configuration window of QPC starting window. But I have not solved my problem. Ian, I presume that you

Re: [ql-users] QPC Keyboard

2005-01-14 Thread P Witte
George writes: I have also produced a private keyboard table loaded by KBD_TABLE which to some extent allows the two uses of the number pad. Holding down Alt Gr makes the num pad act as though Num lock was off. How difficult would it be to add Minerva's 'Compose' keystrokes? You know, 'a' +

Re: [ql-users] QPC Keyboard

2005-01-13 Thread ian . pizer
That is a great idea - how do you do it? My QPC has no configure block. -- Message original -- To: [EMAIL PROTECTED] Subject: Re: [ql-users] QPC Keyboard Date: Thu, 13 Jan 2005 15:23:55 +0100 From: Wolfgang Uhlig [EMAIL PROTECTED] Cc: Reply-To: [EMAIL PROTECTED] When I use QPC2v312 via XP my

Re: [ql-users] QPC Keyboard

2005-01-13 Thread Wolfgang Uhlig
That is a great idea - how do you do it? My QPC has no configure block. Oh, hardly can't believe that you don't know: double clicking on your QPC.exe while holding pressed the Shift key will bring you into the config menu of QPC/SMSQ/E, where you can configure lots of things among which the

Re: [ql-users] QPC Keyboard

2005-01-13 Thread ian . pizer
Terrific. What ignorance on my part. I tried as you said but that does nothing. Maybe because of Windows XP? -- Message original -- To: [EMAIL PROTECTED] Subject: Re: [ql-users] QPC Keyboard Date: Thu, 13 Jan 2005 17:00:21 +0100 From: Wolfgang Uhlig [EMAIL PROTECTED] Cc: Reply-To: [EMAIL

Re: [ql-users] QPC Keyboard

2005-01-13 Thread Rich Mellor
On Thu, 13 Jan 2005 20:15:40 +0100, [EMAIL PROTECTED] wrote: Terrific. What ignorance on my part. I tried as you said but that does nothing. Maybe because of Windows XP? Nope works here - you might not be holding down the shift key long enough. You might need to left click the QPC2 icon first