st Regards,
Sameer N. Ingole
http://weblogic.noroot.org/gallery2/
--
Better to light one candle than to curse the darkness.
l the email had
already been pop-ed before. I'd already checked the maildir size and
it was only acouple of kilobyte, while I had an 4 MB of mail quota.
Check if your quota includes trash folder..
--
Best Regards,
Sameer N. Ingole
http://weblogic.noroot.org/
--
Better to light one candle t
need users: alias, qmaild, qmaill, qmailp in nofiles group and
qmailq, qmailr, qmails in qmail group etc.
Did you miss some of these steps?
Read http://www.proscrutiny.com/howtos/qmail-ldap.html#users-groups_subsec
What does your /var/qmail/bin/qmail-showctl say?
--
Best Regards,
Sameer N
it says if you can't spot any problem.
--
Best Regards,
Sameer N. Ingole
http://weblogic.noroot.org/gallery2/
--
Better to light one candle than to curse the darkness.
T"} \
/usr/local/bin/tcpserver \
-vDU"$H$R" \
${LOCALNAME+"-l$LOCALNAME"} \
${BACKLOG+"-b$BACKLOG"} \
${CONCURRENCY+"-c$CONCURRENCY"} \
-x/var/qmail/control/qmail-smtpd.cdb \
-- "${IP-0}" "${PORT-25}" \
/qmail-smtpd.rules file say? Which type of
authentication you are using? Perhaps you have not configured
qmail-smtpd.rules.
Did you configure it?
Did you compile qmail-smtpd.rules into qmail-smtpd.cdb?
--
Best Regards,
Sameer N. Ingole
http://weblogic.noroot.org/gallery2/
--
Better to light one
e too. -xtcp.cdb ??
check your control directory, I think it should be something like
qmail-pop3d.cdb.
-- "${IP-0}" "${PORT-110}" \
/var/qmail/bin/qmail-popup "${POPUPHOST-`sed 1q
/var/qmail/control/me`}" \
/var/qmail/bin/auth_pop \
/var/qmail/bin/qmail-pop3d "${MAILDIRNAME-Maildir}"
'
--
Best Regards,
Sameer N. Ingole
http://weblogic.noroot.org/
--
Better to light one candle than to curse the darkness.
OTECTED] qmail]# cat ./service/pop3d/log/main/current
@400045e6c0812ac1ee34 tcpserver: warning: dropping connection,
unable to read tcp.cdb: file does not exist
Post your /service/pop3d/run file.
--
Best Regards,
Sameer N. Ingole
http://weblogic.noroot.org/gallery2/
--
Better to light one candle than to curse the darkness.
Dear Sato,
Sameer N Ingole wrote:
sato x wrote:
Hi Sameer. Thank you for your reply. Latest information, I've just
reinstalled qmail-ldap according to the tutorial from
http://www.qmail-ldap.org/wiki/Full_Installation_Guide_-_Basic_Qmail_Installation,
yet I didn't includ
y is wrong with your setup.
end quote
[EMAIL PROTECTED] bin]# ./qmail-showctl
Looks ok
--
Best Regards,
Sameer N. Ingole
http://weblogic.noroot.org/gallery2/
--
Better to light one candle than to curse the darkness.
is not working. Can you show (almost) unedited
output of showctl please?
You may want to strip off ldap root password :)
also try sending mail when after you have increased loglevel for smtp
daemon. Post logs as well.
--
Best Regards,
Sameer N. Ingole
http://weblogic.noroot.org/gallery2/
--
t.
Wait for sometime and it will resolve after your ISPs DNS cache expire.
My nslookup www.proscrutiny.com <http://www.proscrutiny.com> still
give 64.62.190.191 <http://64.62.190.191>
is correct.
--
Best Regards,
Sameer N. Ingole
http://weblogic.noroot.org/gallery2/
--
Better to
/control/locals.cdb or ~control/locals
~/control/rcpthosts.cdb or ~control/rcpthosts
Both are correct. Whenever you make a change in locals or rcpthosts, you
run make. This creates a database file in .cdb file keeping the prefix
of file same.
--
Best Regards,
Sameer N. Ingole
http://weblog
instructions here..
http://www.proscrutiny.com/howtos/
Report any problem you face, do not reinstall instead of solving the
problem.
--
Best Regards,
Sameer N. Ingole
http://weblogic.noroot.org/gallery2/
--
Better to light one candle than to curse the darkness.
.
check your slapd.conf file for something like this..
# Misc security settings
password-hash
--
Best Regards,
Sameer N. Ingole
http://weblogic.noroot.org/
--
Better to light one candle than to curse the darkness.
Regards,
Sameer N. Ingole
http://weblogic.noroot.org/gallery2/
--
Better to light one candle than to curse the darkness.
p.org site.
--
Best Regards,
Sameer N. Ingole
http://weblogic.noroot.org/gallery2/
--
Better to light one candle than to curse the darkness.
Jaime Ventura wrote:
Hello.
Im been using qmail-ldap for a while with qmail-scanner and
Spamassassin.
'Til now, I would tag the mail as spam only, but now need to reject
mail tagged as spam for a specific user.
Can I do it?
Is "qmail-scanner" the best scanner to do it than simscan ?
Turbo Fredriksson wrote:
Quoting satish patel <[EMAIL PROTECTED]>:
anybady know about content filtering tool ?and spam
filtering ...i want solution of spam i m tired 2 fight with spam
Spamassassin (for anti-spam) and SimScan (for anti-virus).
Basicall
&w=2
Regards,
Sameer N. Ingole.
http://weblogic.noroot.org
ster server. So that satisfies the condition for
RCPTCHECK that the domain should be in ~control/locals.
I suggest you use RCPTCHECK with SANITYCHECK which will reject senders
without valid email address.
HTH.
Regards,
--
Sameer N. Ingole
http://weblogic.noroot.org/
---
Better to light one
n-exist mail-ids.
I want to reject non-exist mail-ids at mx1.hello.com itself.
You did not read!
http://www.qmail-ldap.org/wiki/RCPTCHECK
--
Sameer N. Ingole
http://weblogic.noroot.org/
---
Better to light one candle than to curse the darkness.
loaded with inbound mails as much as Server1.
Regards,
--
Sameer N. Ingole
http://weblogic.noroot.org/
---
Better to light one candle than to curse the darkness.
am but at the same time I face
odd calls of customers who are loosing ham but that seldom happens. If
you decide to use this combination, then take a close look at simscan
options.
You may also consider DSPAM+Mysql as suggested by Jacob. I haven't tried
it so can't comment on it.
CHECK and SENDERCHECK.
2. Proper Rate Limit
What do you mean by that?
and Spam solution. I get almost 50k mails and out of that 75% are spam.
You may want to use Spamassassin with simscan, RBLs etc.
Regards,
--
Sameer N. Ingole
http://weblogic.noroot.org/
---
Better to light one candle than to
Juliano Souza - Tecnologia wrote:
The ldap module does not have relationship between vpopmail-ldap and
qmail-ldap.
But can I use both together?
If you install qmail-ldap, it already has pop support. It is capable of
authenticating with LDAP. So why do you want to use both?
--
Sameer N
connectivity on all locations is good, why not go for one server?
HTH.
Regards,
--
Sameer N. Ingole
http://weblogic.noroot.org/
---
Better to light one candle than to curse the darkness.
Sameer N Ingole wrote:
Alain Wolf wrote:
AUTHPREPEND works for me event with TLSREQUIRED,
but only when set in /var/qmail/boot/qmail-smtpd/env/AUTHPREPEND
and not when seit in /var/qmail/control/qmail-smtpd.rules
Is there a way I can see which environment variables are being
considered
nment variables are being
considered? Increasing loglevel didn't help.
--
Sameer N. Ingole
http://weblogic.noroot.org/
---
Better to light one candle than to curse the darkness.
Sameer N Ingole wrote:
-- qmail-smtpd.rules file start --
127.:allow,RELAYCLIENT=""
:allow,SMTPAUTH="TLSREQUIRED",AUTHPREPEND="authenticated-as:",RCPTCHECK="",SANITYCHECK="",NOPBS="",QMAILQUEUE="/var/qmail/bin/simscan&
sure..
even after creating .cdb twice but no luck..
Is it a bug or I am doing something wrong.
/ /
--
Sameer N. Ingole
http://weblogic.noroot.org/
---
Better to light one candle than to curse the darkness.
LDAP instead of storing them in files in ~control/whatever. In some
situations, it is very helpful.
--
Sameer N. Ingole
http://weblogic.noroot.org/
NetFreeHost.com Support wrote:
This is my first qmail-ldap installation, so can you please tell me
how i add a virtual domain to LDAP ?
Assuming this is a sample entry in ldap tree:
# Example ldap entry for test, created by Sameer N. Ingole < strike at
proscrutiny dot com >
# Proscruti
rata-qmail-ldap.html
--
Sameer N. Ingole
http://weblogic.noroot.org/
---
Better to light one candle than to curse the darkness.
Sameer N Ingole wrote:
[snip]
Can any one tell me how to fix the problem ?
If you have compiled qmail with LDAPLIBS=-L/usr/local/lib -lldap
-llber and LDAPINCLUDES=-I/usr/local/include and still get errors like
above, you need to add the path to these libraries to /etc/ld.conf.so
and run
nd LDAPINCLUDES=-I/usr/local/include and still get errors like above,
you need to add the path to these libraries to /etc/ld.conf.so and run
ldconfig command as root. If qmail refuse to start even after this, try
increasing ulimit in /var/qmail/boot/qmail/run file and then check if
the process ex
-ldap-1.03-20060201-controls20060403b.bz2
<http://qmail.bayour.com/patches_ldap/qmail-ldap-1.03-20060201-controls20060403b.bz2>?
I searched for any previous discussions related to this on qmail-ldap
archives and googled around but could not find anything useful.
--
Sameer N. Ingole
Blog
/manually_patch.html
Above link explains how to patch manually, the example used there is of
custom error patch..
Regards,
--
Sameer N. Ingole
Blog: http://weblogic.noroot.org/
---
Better to light one candle than to curse the darkness.
ta page on the above link.
Regards,
--
Sameer N. Ingole
Blog: http://weblogic.noroot.org/
---
Better to light one candle than to curse the darkness.
Claudio Jeker wrote:
On Wed, Dec 28, 2005 at 04:42:53PM +0530, Sameer N Ingole wrote:
Hi,
I have been trying to add an attribute mailReplyText for an LDAP entry.
The message I was trying to store is a multiline message so I was
referring to
http://www.nrg4u.com/qmail/QLDAPINSTALL
nrg4u.com. Means I get literal string which is a
base64 encoded message in autoreply mail body.
I got other things working using PHP, like creating users, managing
attributes etc. in LDAP.
But I am stuck with vacation mail (multiline messages).
Regards,
--
Sameer
ssage) and
chunk_split(base64_encode($mymessage)) but both base64 strings failed.
If anyone have any Ideas what I am doing wrong? Did anyone managed to
use multiline autoreply message using base64 encoding?
An example of an LDAP entry (as in LDIF file) would be a greate help.
Regards,
--
Sameer
s will shade some light on this.
regards
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
others will shade some light on this.
regards
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
/www.proscrutiny.com/howtos/errata-qmail-ldap.html#004
Regards,
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*********/
dies
connecting to pop3s. I was trying to find out what is stopping M$
Outlook from POP3ing on ssl.
Now when I replace pop3s with port number my pop3s works. So from where
tcpserver interpretes what pop3 (or pop3s) mean?
Sameer N Ingole wrote:
Hi All,
I was trying to run qmail-pop3d-ss
AIL/bin/pbsadd"}
if [ X${NOPBS+"true"} = X"true" ]; then
unset PBSTOOL
fi
unset PBSTOOL
exec \
tcpserver -v -HRl $ME -x$QMAIL/control/qmail-pop3d.cdb \
${CONCURRENCY:+"-c$CONCURRENCY"} ${BACKLOG:+"-b$BACKLOG"} \
-s ${TLSCERT:+"-n$TLSCERT"} 192.168.2.111 995 pop3s \
$QMAIL/bin/qmail-popup $ME \
$QMAIL/bin/auth_pop ${PBSTOOL:+"-d$PBSTOOL"}\
$QMAIL/bin/qmail-pop3d "$ALIASEMPTY"
--- Ends ---
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
t create a copy of
/var/qmail/boot/qmail-smtpd,
change ownerships as required,
change run file,
add new IP to it and start a new daemon?
Will it work?
To change smtp cert can I use -n option
for tcpserver? How do I specify ~/control/smtpcert for
this second daemon?
Regards,
--
Sameer
.
Any guesses what might be stopping me from sending
mails?
Regards,
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
Sameer N Ingole wrote:
Taciano Tavares wrote:
Are you using Spamassassin? Atthachment blocks is by domain? The
simscan needs a strong machine?
Yes, actually spamassassin is heavy as compared to simscan. Its C
based. Simscan is not all that heavy. Yes you can block attachements
per domain
configuration.
I think this is not a proper list to discuss these topics though.
Regards,
--
Sameer N. Ingole
Taciano Tavares wrote:
Hi!
I have a server that receives a lot of messages and I need to block
some messages with specifics attachment files and specifics subjects...
Someone know any program with good performance for that case?
[]s
taz
ripmime
you may use it with simscan
--
Sameer N
Claudio Jeker wrote:
On Mon, Sep 19, 2005 at 06:23:05PM +0530, Sameer N Ingole wrote:
Here I found is pretty obscure as what *add an appropriate Received: field*
means. What should smtp add? The IP or host name of email server on which
smtp relay is or IP or host name of smtp client? Is
ning on the servers then
attributes this mail as spam whereas it is not. Now how do I deal with
it? Is it some misconfiguration in qmail-ldap or it is normal behavior?
Looking forward for your valued reply.
Regards,
--
Sameer N. Ingole
.proscrutiny.com/howtos/errata-qmail-ldap.html#002
"qmail-ldap POP3 fails, I suspect ldap-lookup failure"
See if it helps.
Regards,
--
Sameer N. Ingole
ample:
BDB database definitions
Check that for configuration of rootdn.
Regards,
Sameer.
*/Sameer N Ingole <[EMAIL PROTECTED]>/* wrote:
gokul nath wrote:
>Dear sir,
>
> i tried to send a mail using the command prompt
>where i have installed qmail and ldap ser
gure
it in slapd.conf.
Regards,
--
Sameer N. Ingole
http://www.proscrutiny.com/howtos/errata-qmail-ldap.html#004
--
Sameer N. Ingole
Sameer N Ingole wrote:
gokul nath wrote:
i have my ldap server running now.
Have necessary schema files in place, configure slapd.conf accordingly
and restart ldap server.
i want integrate my existing qmail server with my
exising ldap server.
You need to recompile qmail with qmail
suggested.
it would be a real help to me
Regards
gokul
--- Sameer N Ingole <[EMAIL PROTECTED]> wrote:
gokul nath wrote:
kindly help me out on how to integrate qmail with
ldap. I want all my qmail users to get
authenticated
thorough ldap.
I am stuck with this issue for
?
Read http://www.proscrutiny.com/howtos/
Regards,
-
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
,
-
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
wn an ldif file. You are not supposed to follow
it as it is.
Regards,
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
es.
So now the sample entry looks like
Gotchas
---
Even if you don't specify the attribute deliveryMode as reply
and the attribute mailReplyText exists it will reply
automatically as long as mailReplyText attribute is
defined in the ldap entry for th
still have any questions, you can ask
on openldap-software list.
Regards,
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
[EMAIL PROTECTED] wrote:
Quoting Sameer N Ingole <[EMAIL PROTECTED]>:
[EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] qmail-smtpd]# svc -d /service/qmail-smtpd
[EMAIL PROTECTED] qmail-smtpd]# cd /var/qmail/boot/qmail-smtpd
[EMAIL PROTECTED] qmail-smtpd]# env LOGLEVEL=255 ./run
tcp
[EMAIL PROTECTED] wrote:
Quoting Sameer N Ingole <[EMAIL PROTECTED]>:
[EMAIL PROTECTED] wrote:
Quoting Sameer N Ingole <[EMAIL PROTECTED]>:
[EMAIL PROTECTED] wrote:
Quoting Sameer N Ingole <[EMAIL PROTECTED]>:
[EMAI
Hi Claudio,
Claudio Jeker wrote:
On Fri, Aug 05, 2005 at 11:05:08AM +0530, Sameer N Ingole wrote:
homeDirectory: /var/qmail/maildirs
mailMessageStore: /var/qmail/maildirs/spd9
It created the file spd9 in maildirs but not created directory..
This is a normal behaviour, you
[EMAIL PROTECTED] wrote:
Quoting Sameer N Ingole <[EMAIL PROTECTED]>:
[EMAIL PROTECTED] wrote:
Quoting Sameer N Ingole <[EMAIL PROTECTED]>:
[EMAIL PROTECTED] wrote:
Quoting Sameer N Ingole <[EMAIL PROTECTED]>:
[EMAI
[EMAIL PROTECTED] wrote:
Quoting Sameer N Ingole <[EMAIL PROTECTED]>:
[EMAIL PROTECTED] wrote:
Quoting Sameer N Ingole <[EMAIL PROTECTED]>:
[EMAIL PROTECTED] wrote:
Quoting Scott Ryan <[EMAIL PROTECTED]>:
This one
[EMAIL PROTECTED] wrote:
Quoting Sameer N Ingole <[EMAIL PROTECTED]>:
[EMAIL PROTECTED] wrote:
Quoting Scott Ryan <[EMAIL PROTECTED]>:
This one time, at band camp, [EMAIL PROTECTED] wrote:
/var/qmail/maildirs/
homeDirectory: /var/qmail/m
- Original Message - From: <[EMAIL PROTECTED]>
To: "Sameer N Ingole" <[EMAIL PROTECTED]>
Cc: ; <[EMAIL PROTECTED]>
Sent: Wednesday, August 03, 2005 7:58 PM
Subject: Re: Qmail-LDAP: Maildir not create automatically
Quoting Sameer N Ingole <[EMAIL PROTECT
try this and tell me what it did..
run this command as root
/var/qmail/bin/dirmaker1 "/var/qmail/maildirs/spd9"
Did it create dir intended directory (/var/qmail/maildirs/spd9) ?
Once these questions are answered, we will proceed
Roger Thomas wrote:
Quoting Sameer N Ingole <[EMAIL PROTECTED]>:
Are you sure about
192.168.1.
Do I need to put the full (actual) IP address there? ie 192.168.1.47 ?
If you want to allow all the IPs in that range to use your server as
mail relay, put entire range. Mean
rcpthosts and locals
I installed qmail where the fqdn of my server is imap.example.com
In rcpthosts and locals, do I put
example.com
imap.example.com
or just example.com ?
Please advise.
--
Roger
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
qdn of my server is imap.example.com
In rcpthosts and locals, do I put
example.com
imap.example.com
or just example.com ?
Please advise.
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
rs/spd7/:_file_does_not_exist._(#4.3.0)/
@400042ee2e1231c6169c status: local 0/10 remote 0/20
======
Regards,
--
Sameer N. Ingole
to LDAP server with
retrieved user's dn and password provided by user. Password schema
used
in userPassword field must be supported by LDAP server's
authentication
system.
--
Tomas
Regards,
--
Sameer N. Ingole
.
Regards,
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
Hardik Dalwadi wrote:
Sameer N Ingole wrote:
Hardik Dalwadi wrote:
jay alvarez wrote:
For example, after sending email to
[EMAIL PROTECTED] it created a /home/bani and
/home/bani/Maildir directories... and an ascii file
/var/vmail/bani which resembles the mbox format.
Ya, I know this
, which owns the /var/vmail directory
such
that it cannot create any file in it.
Any idea?
Thanks!
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.ya
put when qmail-smtpd run with increased loglevel.
--
Sameer N. Ingole
ble to run the script.
Jay, did you try running qmail smtpd with increased loglevel?
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
running.
I have attached here some files that might interest
you:)
Please do not attach slapd logs, it will not help as lookup is working
properly..
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
HyperAxe wrote:
Hi,
Are you using /var/qmail/bin/maildirmake or a customized script of your
own? If you are using a custom script, can you email us the content?
Its there in his first mail..
--
Sameer N. Ingole
/*/
Better to light one
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
--
Sameer N. Ingole
/***
vmail, which owns the /var/vmail directory such
that it cannot create any file in it.
Any idea?
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
,
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
lease tell me the proper
way of going around this problem?
For detailed installation steps refer
http://www.proscrutiny.com/howtos/qmail-ldap.html
Regards,
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
maker
script located at /var/qmail/bin/dirmaker and
contains:
#!/bin/sh
/bin/mkdir -m 0700 -p $1
There was a long discusion on this on the list you can find here
http://marc.theaimsgroup.com/?l=qmail-ldap&m=111590884712691&w=2
See if this help.
--
Sam
Mihai Costache wrote:
so ... the problem is only when password contain spaces ?
or any special characters ?
That would be a pass phrase then..
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
m/qmail/QLDAPINSTALL
You may also refer to step-by-step installation
that I have here..
http://www.proscrutiny.com/howtos/
Regards,
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
-1.03.
Regards,
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
o lazy to mention it. But not sure if it qmail-smtpd will
start tls if SMTPAUTH is given empty string. Never tried that one, and
don't have a spare server to test all that.. :-(
(assuming smtpcert and cert.pem is in place)
--
Sameer N. Ingole
ete it I will surely add link there.
Regards,
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
that, you should have the options enabled as told by bruno.
Here, this might help you..
http://www.proscrutiny.com/howtos/qmail-ldap.html
Regards,
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
dap, simscan, spamassassin.
(It was working some time before..)
Regards,
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
Sameer N Ingole wrote:
Hi,
I was trying to run qmail-ldap. Following are the steps I performed.
Correction there,
I was trying to run *qmail-imapd*. Following are the steps I performed.
1. Edited qmail-imapd/run script to use auth_imap
--< edited exec statement >--
ind. What does the warning
"auth_error: authorization failed (file descriptor not open)" indicate?
I am using qmail-ldap-1.03-20050401a patch and
qmail-queue-custom-error patch.
Regards,
--
Sameer N. Ingole
/*/
Better to light one candle than to curse the darkness.
/*/
1 - 100 of 120 matches
Mail list logo