al Box:
>
> systemd service: irqbalance: [ FAILED ]
>
> On 2/1/2017 6:58 AM, Eric Broch wrote:
>
> Although, I don't think I've ever had it fail on VM's
>
> On 2/1/2017 6:39 AM, Eric Broch wrote:
>
> No
>
> On 2/1/2017 5:51 AM, Richard Baxant wrote
at 5:53 PM, Eric Broch <ebr...@whitehorsetc.com> wrote:
> I just downloaded from the link. Is this a problem with your DNS?
>
> What are your DNS servers?
>
> # cat /etc/resolv.conf
>
> On 1/29/2017 3:00 PM, Richard Baxant wrote:
>
> Getting error on S
Getting error on Step #2
2) # curl -O
https://raw.githubusercontent.com/qmtoaster/scripts/master/qt_prep.sh
% Total% Received % Xferd Average Speed TimeTime Time Current
Dload Upload Total SpentLeft Speed
0 00 00
Hello,
I had a dummy email with a rather simple password. I've since deleted that
account however it sent out 70,000+ spam emails in a 24 hour period
according to my service provider.
Running the following:
tail -f /var/log/qmail/current | tai64nlocal
I get the following output every 2
not
/var/log/qmail/current, maybe /var/log/qmail/send/current?
You might want to check your queue to see if there are any residual
messages in it. Use 'qmHandle -l' or 'qmailctl queue' and delete those that
come from the dummy account.
EricB
On 4/10/2015 7:11 PM, Richard Baxant wrote:
Hello
This is what I get when I run those commands:
[root@mail smtp]# qmHandle -l
Messages in local queue: 0
Messages in remote queue: 0
[root@mail smtp]# qmailctl queue
messages in queue: 0
messages in queue but not yet preprocessed: 0
On Fri, Apr 10, 2015 at 9:47 PM, Richard Baxant qmailtoasterl
Has anyone got this to work in qmailtoaster with this brand of SSL at 2048
encryption?
I can see that qmail has the clientcert.pem - servercert.pem. I looked at
the internals of the file to see the order of the keys. I cannot figure out
other than the test cert is 1024 encryption and mine is
Yes I followed the first part. It gave me the information to cat the files
to create the pem. The rest is self-signed certs and I do not want that
part.
On Sat, Feb 1, 2014 at 10:52 AM, Eric Shubert e...@shubes.net wrote:
On 02/01/2014 08:09 AM, Richard Baxant wrote:
Has anyone got
for administration.
--
-Eric 'shubes'
On 12/14/2010 10:16 AM, Richard Baxant wrote:
Thanks Eric
I was looking at using the repo mentioned here:
http://www.webtatic.com/blog/2009/06/php-530-on-centos-5/
If you see any issues, please let me know. Thanks again!
-Richard
On Tue, Dec 14, 2010 at 12
I have been trying to get rsync to work and in the process I added the rync
user to the vchkpw group... The following is where I think I messed up my
mail server.
I then changed all the ownership of the /vpopmail directory to
vpopmail:vchkpw and did it recursively (*chown -R vpopmail:vchkpw ./**)
@40004d050328311bbd3c delivery 492: deferral:
Uh-oh:_.qmail_has_prog_delivery_but_has_x_bit_set._(#4.7.0)/
@40004d050328311bec1c status: local 0/10 remote 0/60
Any idea on how this could correlate with using chown or chmod?
On Sun, Dec 12, 2010 at 10:49 AM, Richard Baxant qmailtoasterl...@gmail.com
wrote
Figure-out that the .qmail-* files should not be executable (eg x_bit_set)
Now isolated it to a procmail -- bogofilter issue and it is still a
permissions issue I believe
On Sun, Dec 12, 2010 at 12:20 PM, Richard Baxant qmailtoasterl...@gmail.com
wrote:
I finally found the log file and I have
Eric is correct, I am NOT trying to put POSTFIX on my QMT box but on my web
server box.
BTW Eric, I had your setup work only once and then for some reason it does
not send now. Serves me right for fiddling with it before bed last night.
I am trying to get my logwatch reports. I do a logwatch
Thanks Eric... I'll give it a look and see if I can find this.
On Thu, Jun 24, 2010 at 11:43 PM, Eric Shubert e...@shubes.net wrote:
Richard Baxant wrote:
I have an external ip address that goes through my router (hardware
firewall) to my webserver box (192.168.x.1) and my qmailtoaster box
I think this is the thread that you were referring to:
http://www.mail-archive.com/qmailtoaster-list@qmailtoaster.com/msg23916.html?
On Fri, Jun 25, 2010 at 9:15 PM, Richard Baxant
qmailtoasterl...@gmail.comwrote:
Thanks Eric... I'll give it a look and see if I can find this.
On Thu, Jun
I had yum-priorities installed but did some fine(r) tuning, added your
patch
and all seems to have gone without a hitch on the CentOS 5.2 machine. Thank
you so much for the prompt solution!
I am in the same boat... what did you change using yum priorities? Where and
how did you apply the patch?
I get a blank screen after login. In the apache error_log I get:
PHP Fatal error: Cannot redeclare sqauth_save_password() (previously
declared in
/usr/share/squirrelmail/plugins/compatibility/includes/1.5.1/global.php:205)
in /usr/share/squirrelmail/functions/auth.php on line 291, referer:
I figured out the issue. I had to upgrade the compatibility plugin
Just installed Qmailtoaster Plus want to upgrade my production system
I did a yum update - no issues
ran newmodel command from the qtp-menu:
qtp-newmodel v0.3.4 starting Sat Mar 28 19:46:51 EDT 2009
qtp-whatami v0.3.2
DISTRO=CentOS
OSVER=5.2
QTARCH=i686
QTKERN=2.6.18-92.1.22.el5
Can you clarify on the patching part? I found this patch file in
sources but not sure what changes I need to make on it?
clamav-0.9x.patch.bz2
cd /usr/src/redhat/SOURCES
tar xjvf clamav-0.93.3.tar.bz2
cd clamav-0.93.3
patch clamav-0.9x.patch.bz2
then rpmbuild process...
If you install the
I ran the rpmbuild command and while compiling it stops to ask for the
file to patch?
On Fri, Jul 11, 2008 at 2:11 PM, Jake Vickers [EMAIL PROTECTED] wrote:
Richard Baxant wrote:
Can you clarify on the patching part? I found this patch file in
sources but not sure what changes I need to make
Richard Baxant wrote:
I ran the rpmbuild command and while compiling it stops to ask for the
file to patch?
On Fri, Jul 11, 2008 at 2:11 PM, Jake Vickers [EMAIL PROTECTED] wrote:
Richard Baxant wrote:
Can you clarify on the patching part? I found this patch file in
sources but not sure
I don't know if this is annoying anyone else but it would seem that as
soon as a clamav-toaster release is made, clamav releases a new
version, so 0.93.1 toaster just came out and now there is clamav
0.93.3 is available
So, is there a simpler way to get realtime updates without waiting for
an
I figured as much... Thanks for the quick reply Jake.
What are the 2 projects? Can you post the links too. Thanks.
On Sat, Jun 7, 2008 at 8:46 PM, Jake Vickers [EMAIL PROTECTED] wrote:
Richard Baxant wrote:
Hi everyone...
My first issue is that one of my domains when I click the List
Hi everyone...
My first issue is that one of my domains when I click the List
Domain link and then the domain I get a blank screen. Every domain I
add does the same thing via vqadmin.
My second issue is that vqadmin does not use the vadddomain command
properly and when entering qmailadmin none
Thanks for the reply Eric,
So from reading the info at the link you provided there really is not
too much you can do to prevent backscatter?
On Sat, Apr 26, 2008 at 10:15 PM, Eric Shubert [EMAIL PROTECTED] wrote:
Richard Baxant wrote:
I am getting 100s of messages since yesterday to one
I am getting 100s of messages since yesterday to one of my emails
[EMAIL PROTECTED] with these various subjects:
failure notice
Delivery Status Notification (Failure)
Mail delivery failed: returning message to sender
Undelivered Mail Returned to Sender
They are clearly all spam and virus
As of late in my great fight against spam I have started to receive
NDRs (non-delivery reports)
where the spammer sends spam as non existent users with my domain and
then I get all these NDRs.
Can anyone tell me how to stop this?
TIA
Hello Robin,
I felt your pain. All bad words aside, I recommend trying bogofilter,
which uses a Bayesian technique. It has cut my SPAM by 75% especially
Viagra. You still have to teach it and the more Spam you feed it the
more accurate it becomes.
Read more about it here:
After the first email that I receive ... or the first email I send,
the frame below the navigation goes blank?
-
QmailToaster hosted by: VR Hosted http://www.vr.org
Has anyone used bogofilter for SPAM prevention with their toaster
setup? If so, how did you go about setting it up? Thanks.
-
QmailToaster hosted by: VR Hosted http://www.vr.org
++
| Tables_in_vpopmail |
++
| mydomain_com |
| dir_control|
| lastauth |
| valias |
++
My domain is also available in the mentioned sections of the Toaster Admin.
After clicking mydomain.com in List
:
I have my qmailadmin in /usr/share also.. hmmm somewhere is
missing...
maybe you can try reinstall the package manually again?
Richard Baxant wrote:
After going through the file system ... I realized that qmailadmin is
not located in
/usr/share/toaster like the rest of the toaster
you'll see the result ;-)
Richard Baxant wrote:
What do you mean when you say manually? Each src.rpm separately? ... I
have uninstalled individual packages and reinstalled just to find that
they were not installed ... This is frustrating for something that was
created to be simple
-toaster*.i386.rpm
done restart try login again :-)
Richard Baxant wrote:
Hi Gabriel,
do you get the following for when you type the command ls -la when
inside /usr/share/qmailadmin ?
drwxr-xr-x 5 root root 4096 Feb 19 16:23 .
drwxr-xr-x 197 root root 4096 Feb 19 16:30 ..
drwxr-xr-x 2
configuration on a test unit of FC4, maybe you should try
CentOS.
In qmailtoaster, is included of full installation process.
Richard Baxant wrote:
:(
Still the same ...
On 2/19/06, Gabriel Lai Yong Shern [EMAIL PROTECTED] wrote:
Yes Richard,
I have the following exactly the same
or vpopmail. What a nightmare!!!
On 2/19/06, Gabriel Lai Yong Shern [EMAIL PROTECTED] wrote:
you meant was it works for qmailadmin too??
There must be some config you have done? My propose was you install a test
server on another unit.
Richard Baxant wrote:
Thanks for the help
the question I have now is where in the toaster can I update or
insert this command?
On 2/19/06, Richard Baxant [EMAIL PROTECTED] wrote:
Yes ... it is some sort of permissions issue ... I just recalled that
I had this problem in the past ... but with me and documentation ...
it was never recorded
:
maxpopaccounts: 0
maxaliases: 0
maxforwards: 0
maxautoresponders: 0
maxmailinglists: 0
default_quota: 0
For some reason QmailAdmin does not like this file when adding a domain.
On 2/19/06, Richard Baxant [EMAIL PROTECTED] wrote:
Well this has to be the strangest solution ... I went
QmailAdmin has some sort of permissions issue, all of the menu links
are not visible, I have tried changing permissions but once that is
done QmailAdmin becomes completely useless and when even a correct
password is entered Invalid Login is displayed.
I am using Erik Espinoza's current-install-script.sh and I have all
of a sudden run into this problem, the weird thing is I installed this
a day ago and all installed fine but I had to re-install because of
another application. After 2 clean installs of FC4, this installer
keeps failing with the
I am using Erik Espinoza's current-install-script.sh and I have all
of a sudden run into this problem, the weird thing is I installed this
a day ago and all installed fine but I had to re-install because of
another application. After 2 clean installs of FC4, this installer
keeps failing with the
I am using Erik Espinoza's current-install-script.sh and I have all
of a sudden run into this problem, the weird thing is I installed this
a day ago and all installed fine but I had to re-install because of
another application. After 2 clean installs of FC4, this installer
keeps failing with the
spamassassin-toaster-3.1.0-1.2.11
Erik's install script removes sendmail first and then starts the toaster install
On 2/17/06, Jake Vickers [EMAIL PROTECTED] wrote:
Richard Baxant wrote:
I am using Erik Espinoza's current-install-script.sh and I have all
of a sudden run into this problem
, PACKAGING and CONFIGURATIONS are from http://www.qmailtoaster.com
On 2/17/06, Jake Vickers [EMAIL PROTECTED] wrote:
Richard Baxant wrote:
First I apologize if this post has repeated 2-3 times ... it told me
it was returned as spam which it is not.
rpm -qa | grep toaster returns
Yes the install completed and did not end in any noticable errors.
I will run the script again and let you know ...
Did you finish the install? I have to ask You were still missing or
so packages. You may try running the entire install script again - it
should run okay now that 89:89 is
I ran the script again ... restarted apache and all is still hidden.
On 2/17/06, Richard Baxant [EMAIL PROTECTED] wrote:
Yes the install completed and did not end in any noticable errors.
I will run the script again and let you know ...
Did you finish the install? I have to ask You were
Hi Gabriel
sendmail was removed in the process...
On 2/17/06, Gabriel Lai Yong Shern [EMAIL PROTECTED] wrote:
Hi Richard,
I'm not sure whether it was true, but maybe you can try remove sendmail
manually by forcing it.
rpm -e sendmail --nodeps
It has evolution installed, and so evolution
installed a fresh FC4 this morning. It's now running well. Fully installed
with the packages.
- Original Message -
From: Richard Baxant [EMAIL PROTECTED]
To: qmailtoaster-list@qmailtoaster.com
Sent: Friday, February 17, 2006 11:32 PM
Subject: Re: [qmailtoaster] stopping at simscan
. How exactly are you trying to access the menu
items? Be quite specific and do not leave anything out. Perhaps you are
assuming something you should not.
W
Richard Baxant wrote:
After a clean install ... All the toaster admin menu items are still
hidden ... I can't understand why
50 matches
Mail list logo