Dumb question.
did you try to run qtp-backup script before any modifications to it?
Dave M
-Original Message-
From: Peter Peterse
Sent: Monday, April 07, 2014 1:24 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] Re: qtp-backup won't work
Eric Shubert schreef op
:
On 12/20/2013 04:30 PM, System Admin wrote:
on fresh install, got to the qmail install part
yum install qmail qmail admin
Shows installing lots of dependencies
but also show this on screen
Installing : *c**ontrol-panel-0.5-0.qt.el6.x86_64* 22/30
Non-fatal POSTIN scriptlet failure in rpm package
Thansk Eric,
On 12/20/2013 8:23 AM, Eric Shubert wrote:
Oops. Forgot to rebuild the nodist rpm for that.
It's there now (or will be on all mirrors w/in an hour).
Thanks.
-
To unsubscribe, e-mail:
My VM of choice ( right now ) is VMware ESXi 5
For me right now, it works, so the VM will be OVF format.
Does OpenVZ, have a server setup like Vmware,
My ESXiserver I think is great as it runs off a 2Gb flash drive, then
the VM`s are created on the internal drive,
FYI, Bare Centos6.5 almost
on fresh install, got to the qmail install part
yum install qmail qmail admin
Shows installing lots of dependencies
but also show this on screen
Installing : *c**ontrol-panel-0.5-0.qt.el6.x86_64* 22/30
Non-fatal POSTIN scriptlet failure in rpm package
control-panel-0.5-0.qt.el6.x86_64
/20/2013 3:30 PM, System Admin wrote:
on fresh install, got to the qmail install part
yum install qmail qmail admin
Shows installing lots of dependencies
but also show this on screen
Installing : *c**ontrol-panel-0.5-0.qt.el6.x86_64* 22/30
Non-fatal POSTIN scriptlet failure in rpm package
Hi all
evrything installed exept :
spamassasin,
Finished Dependency Resolution
Error: Package: spamassassin-3.3.2-0.qt.el6.x86_64 (qmailtoaster-testing)
Requires: perl(*Razor2::Client::Agent*)
Error: Package: spamassassin-3.3.2-0.qt.el6.x86_64 (qmailtoaster-testing)
Update of my test install, Centos 6.5 bare metal, not VM
*What worked for me:*
Clean install, minimal
yum update
yum install yum-priorities
rpm -ivh
http://mirrors.qmailtoaster.com/testing/nodist/qmailtoaster-release-2.0-1.qt.nodist.noarch.rpm
vi /etc/yum.repos.d/qmailtoaster-centos.repo
**
No problemmo,
I am also looking at creating an install ISO, but that may be some
little time down the road , as I am still getting use to mastering disks
in Centos
On 12/19/2013 1:48 PM, Eric Shubert wrote:
Thanks Dave. This is a big help.
On 12/19/2013 01:15 PM, System Admin wrote
Thanks for all the comments as well,
I will get about doing another Fresh install
As I do seem to have a little time on my hands right now ; )
Keep you posted.
On 12/19/2013 1:48 PM, Eric Shubert wrote:
Thanks Dave. This is a big help.
On 12/19/2013 01:15 PM, System Admin wrote:
Update
how do we get this installed
qt-install-repoforge
qmailtoaster-util
No package qt-install-repoforge available
and
No package qmailtoaster-util available
Dave M
On 12/19/2013 3:38 PM, System Admin wrote:
Thanks for all the comments as well,
I will get about doing another Fresh install
As I
HI guys,
time i got testing in Centos6 again.
Built a new bare metal centos 6.5 64bit
Ran this
*rpm -ivh
http://mirrors.qmailtoaster.com/testing/nodist/qmailtoaster-release-2.0-0.qt.nodist.noarch.rpm*
Failed, so went snooping and changed to this
* rpm -ivh
Doh!
sorry guys been a while:
Dumb ass rooky error
yum install autorespond
works just fine
How embarrassing : )
Cheers ,. will let you know how it goes
Dave M
On 12/18/2013 2:15 PM, System Admin wrote:
HI guys,
time i got testing in Centos6 again.
Built a new bare metal centos 6.5
What is the best order to install these, to reduce failed dependencies.
Thanks
Dave M
On 12/18/2013 2:26 PM, System Admin wrote:
Doh!
sorry guys been a while:
Dumb ass rooky error
yum install autorespond
works just fine
How embarrassing : )
Cheers ,. will let you know how it goes
Dave M
Hi all,
is this a DNS or qmail error
Just for one specific domain so far as I can tell
*CNAME lookup failed temporarily. (#4.4.3)
I'm not going to try again; this message has been in the queue too long.
*
Thanks
Dave M
Hi Eric
is that in /var/log/qmail/send
On 11/22/13 8:43 AM, Eric Shubert wrote:
I'd be careful in reaching that conclusion. Is any client program of
hers running while she sleeps, like her computer or perhaps her phone?
This is not uncommon.
I'd be more concerned with unexplained activity
I seel lots of this in the send logs, is it normal
user_and_password_not_set,_continuing_without_authentication
-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail:
Hi Angus,
Care to share
I banned a bunch of Chinese class C's
I tried to attach my iptables , but get bounce back saying file to big.
So anyone who wants a copy of mine,
Exported from a Atomic Linux install
http://www.techyguru.com/qmail.fw
Hi guys n Gals,
I know this is now a qmail problem, just looking for input.
suddenly fail2ban on my server has blocked My IP from sending on port 25
In the fail2ban logs I see:
fail2ban.actions: WARNING [username-notfound] Ban my-ipaddress
It resets the firewall if I do
Hi Guys,
Is there an easy way to do an average daily mail count in/out
Just to see how many emails my server is processing daily
Thanks
Dave M
-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For
Thanks Eric,
I just plain forgot that.
On 11/15/13 10:43 AM, Eric Shubert wrote:
On 11/15/2013 10:15 AM, System Admin wrote:
Hi Guys,
Is there an easy way to do an average daily mail count in/out
Just to see how many emails my server is processing daily
Thanks
Dave M
Thanks for the heads up eric
On 10/09/13 1:35 PM, Eric Shubert wrote:
I certainly don't mind if you guys care to do this. Just so you know
though, I am actively working on getting COS6 compatible packages put
together. It'll probably be a few weeks before they're ready though.
Just FYI.
Hi Dan,
Can you tune it up again and re-post
Then I will make a new VM, and make avaliable to the list
Dave M
On 10/09/13 10:33 AM, Dan McAllister wrote:
While there are a number of places to find suggestions for making
things work in COS6, one thing I do know about them all is that they
are
Hi eric,
Is the command
qmailctl cdb
Thanks
Dave M
On 8/30/2013 7:59 AM, Eric Shubert wrote:
You can turn off virus scanning of incoming emails in the
/var/qmail/control/simcontrol file.
*Remember to run cdb* after changing this file.
I'd expect all of the viruses found to be in Maildir
Here is a little bash script I made, then created cron job to run daily,
This was for my web servers, not tried it on the qmail side, so feel
free to experiment
I also created the unwanted folder so I can check which files were
infected.
*mkdir /var/log/clamav/unwanted**
*
*#!/bin/bash**
Hi again.
*Before* running the script manually, run this ( it will kill any
clamscan running )
killall -9 clamscan
Tested and working
Dave M
On 8/29/2013 8:14 AM, System Admin wrote:
Here is a little bash script I made, then created cron job to run daily,
This was for my web servers
Just had another thought,
you probably dont wnat to run this until the wee hours of the morning,
Otherwise the regular incomming email scan will not run.
Again, Guru please advise.
On 8/29/2013 8:27 AM, System Admin wrote:
Hi again.
*Before* running the script manually, run
I still have ready mede VM`s avaliable:
http://techyguru.com/downloads.html
Dave
On 8/11/2013 10:01 AM, Eric Shubert wrote:
On 08/11/2013 06:45 AM, Istvan Köpe wrote:
There is also an other approach. The idea came after I struggled with
the Centos installation. Install ESXI 5.1 on the server
Hi, all
unfortunately, I don't have any stats, as I recently moved to new servers.
The area is download area is secured so if you need a vm please email
your request at
supp...@techyguru.com
You will get a user id and password, valid for 24 hours.
Dave
On 8/19/2013 7:46 AM, Eric Shubert
Did thie recently to remove hunders of thousands of spam going out mt
qmail box:
Delete all messages in the queue:
*qmHandle -D
*
*Dave M
*
On 7/11/2013 3:43 AM, Kelly Cobean wrote:
I need to flush my qmail queue and for the life of me can't remember
how. I looked around
/usr/libexec/courier-authlib/authda
Where do I check for sure
Thansk
Dave M
On 7/8/2013 8:16 PM, Eric Shubert wrote:
On 07/08/2013 03:33 PM, System Admin wrote:
HI all,
A client is loggin in to squirrelmail,
Clicking on sub folders, and get this error, But not all folders give
the error
looks like courier:
telnet localhost 143
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
* OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE
THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE]*Courier-IMAP*
ready. Copyright 1998-2005 Double
will do,
Thanks eric
On 7/9/2013 1:49 PM, Eric Shubert wrote:
On 07/09/2013 12:33 PM, System Admin wrote:
looks like courier:
telnet localhost 143
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
* OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE
HI all,
A client is loggin in to squirrelmail,
Clicking on sub folders, and get this error, But not all folders give
the error?
*ERROR:**ERROR: Could not complete request.*
Query: SELECT INBOX.Dave
Reason Given: Mailbox does not exist, or must be subscribed to.
All folders worked previously.
Hi all,
Currently our mail mail server can only receive but not send any email.
What logs can I check,
and what might the problem be.
Thanks
-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For
Emai server spamming
I have over 200 thousand in the out queue
Box must be compromised
Any thing We can do to block outgoing .
madmac
On 6/25/2013 12:09 PM, System Admin wrote:
Hi all,
Currently our mail mail server can only receive but not send any email.
What logs can I check,
and what
your IPtables would be the quickest or at the
firewall level.
On 06/25/2013 12:36 PM, System Admin wrote:
Emai server spamming
I have over 200 thousand in the out queue
Box must be compromised
Any thing We can do to block outgoing .
madmac
On 6/25/2013 12:09 PM, System Admin wrote:
Hi
587 if secure connection is used, but block the
spammer.
On 06/25/2013 12:51 PM, System Admin
wrote:
Hi Cecil,
I am very familiar with IP tables, but what port to close for
outgoing ?
Surely can close 25
thing We can do to block outgoing .
madmac
On 6/25/2013 12:09 PM, System Admin wrote:
Hi all,
Currently our mail mail server can only receive but not send any email.
What logs can I check,
and what might the problem be.
Thanks
Yet another weird error , came up on the consle ( putty login )
I was checking the queue for messages again
qmHandle -s
Messages in local queue: 0
Messages in remote queue: 0
[root@mail2 ~]# qmHandle -s
Messages in local queue: 0
Messages in remote queue: 2
*and this showed up after the mail
be compromised
Any thing We can do to block outgoing .
madmac
On 6/25/2013 12:09 PM, System Admin wrote:
Hi all,
Currently our mail mail server can only receive but not send any
email.
What logs can I check,
and what might the problem be.
Thanks
On 5/24/2013 7:11 PM, Cecil Yother, Jr. wrote:
On 05/24/2013 06:50 PM, Eric Shubert
wrote:
On
05/24/2013 11:26 AM, Aleksander Podsiadły wrote:
Dnia 2013-05-24, pią o godzinie 10:19
-0700, System Admin pisze
Hi List,
getting errors when sending to a specific client.
*
*
*Sorry, I wasn't able to establish an SMTP connection. (#4.4.1)
I'm not going to try again; this message has been in the queue too long.*
Their Techs say we need to clear our DNS Cache on our email server (
Qmail toaster )
Who
Thanks Eric,
Dave M
On 5/24/2013 10:07 AM, Eric Broch wrote:
On 5/24/2013 11:19 AM, System Admin wrote:
Hi List,
getting errors when sending to a specific client.
*
*
*Sorry, I wasn't able to establish an SMTP connection. (#4.4.1)
I'm not going to try again; this message has been
44 matches
Mail list logo