Only if the VCR or camcorder has an S video jack already on it. There are
devices that convert composite video to S and vice-versa, but most of these
are cheap and do a very poor conversion.
- Original Message -
From: Jim Pendarvis [EMAIL PROTECTED]
To: Quadlist [EMAIL PROTECTED]
Sent:
I've got an 840av with a Video Spigot AV. I'm running 8.1, but I have
problems reliably getting the video to come out of the Spigot's outputs. It
seems to change depending on what app I'm using, then needs a reboot to make
it work properly again. Would changing to 7.5.5 help this?
The last time I
At 7:14 PM +1100 on 12/13/02, Sque wittily wrote:
Denny Davis wrote:
My friend bought a used Mac Gravis Firebird joystick, but it didn't come with
a install disk or any instructions. Could someone help with this please? I
can download the driver if there is a place that has it, also I would
At 10:24 PM -0600 on 12/23/02, Terry Ovans wittily wrote:
Can anyone tell me if there are any programs out there that will allow
Ham Radio operators to use their Apple computers as code terminals and
the like?
There is one guy who does shareware programs for HAM radio operators that
might have
Thanks for all the help. Until I can get all the software that I need per
your recommendations, I'll try with what's on there already.
At the moment it's Apple Video Player, which I'm guessing might be the
program that was installed to do editing. Unfortunately, when I try to run
it, I get an
At 01:51 -0500 on 30/12/02, Charles Shannon Hendrix wrote:
How long does one of your machines take to boot, say the Q900 for example?
An SE/30 with AppleShare Server 3 installed on it, running 7.1 plus all the
extras I list in the FAQ, takes about 15 seconds to go from warm power-on to
full
At 10:43 -0600 on 30/12/02, Derek Morton wrote:
I haven't seen anybody mention it, but what about the benefit of SCSI
manager 4.3? A Quadra 800 will definitely benefit from it, and the
SCSI Manager 4.3 doesn't *appear* to get used, even on later OS versions - a
guy over on Vintage Macs has had
Happy New Years, Mark Benson [EMAIL PROTECTED]:
What does anyone think a boxed 660av is worth?
I have several 660s here at the house. In eBay dollars, I would wager
they're worth $10, give or take the quality variable.
--
Michael Emery
--
Quadlist is sponsored by http://lowendmac.com/
Happy New Years, Rob [EMAIL PROTECTED]:
What are the best apps for digitizing video?
Fusion Recorder is a good one. I believe there is a download link at the
AV Quadra site: http://www.sims.berkeley.edu/~jwang/cgi/av-faq/. If
that fails, let me know and I'll send you the stuff.
I'm
Thanks for the reply
I use Fusion Recorder now. It seems to be OK, I was just wondering if there
was something else available.
The last time I tried to reformat and partition the 4GB drive, the OS
complained that the drive itself was too large. On OS 8.1, there were no
problems. I'll have to
At 21:42 -0700 on 01/01/03, Rob wrote:
The last time I tried to reformat and partition the 4GB drive, the OS
complained that the drive itself was too large. On OS 8.1, there were no
What formatting tool did you use, and what OS was it? There are some gotchas
outlined in the FAQ that you might
Hi,
I have two machines and was trying to make one uber machine ;-)
From everything I could find on the net it should work
I took a PowerPC PDS card out of a Quadra 610.Which meant taking it out
of the adapter and installed it into a Quadra 650.
The 610 worked fine using MacOS 8.1 with and
At 00:28 -0500 on 02/01/03, Frank Kannemann wrote:
The 650 didn't seem to want to acknowledge the card was there. I did
install the PowerPC control panel switch it on did the vulcan mind
cleansing control-p-r and rebooted it..
You probably have to do a full install of the OS with the card in
13 matches
Mail list logo
