bluegaspode;647090 Wrote:
> I tried it myself now.
> Changed the line
> >
Code:
> > $w = EV::timer( $when - $now, 0, sub {
> >
> to
> >
Code:
> > $w = EV::periodic($when, 0,0, sub {
> >
> in Slim/Util
Added my observations to the following bug report, which I think should
be about the same problem (and this bug is assigned already to Andy, so
he'll get an email notification :) ):
http://bugs.slimdevices.com/show_bug.cgi?id=9367
--
bluegaspode
Did you know: *'SqueezePlayer' (www.squeezeplaye
Well - resaving the libraries made no difference.
I even deleted them and recreated and that didn't work either
Then I noticed that the one multi library which was working - actually
wasn't. It was just including everything in the main library and
ignoring the exclude I'd specified
Frustrated a
Heinz;646709 Wrote:
> I tried the change you suggested, but squeezeboxserver didn't even start
> up.
I tried it myself now.
Changed the line
Code:
$w = EV::timer( $when - $now, 0, sub {
to
Code:
$w = EV::periodic
Yes you can stream Spotify free- see my other thread:
"Streaming Spotify (free) and setting IP address"
--
ejnj
ejnj's Profile: http://forums.slimdevices.com/member.php?userid=35443
View this thread: http://forums.slimdevi
Hi cran,
yes these ntpd logs seem to show the culprit. The internal clock runs
too slow and as the timer of the Squeezebox server is using a
'monotonic' clock as to the documentation, it does not adopt.
ntpd ajusts the server time, but Squeezebox Server right now does not
care.
I'll try tweak
ttodd,
In your server log at around 5:00 the following lines appear:
Code:
[11-08-04 05:01:28.9501] Slim::Utils::Alarm::sound (508) Alarm triggered for
Master Bedroom Radio
[11-08-04 05:01:28.9520] Slim::Utils::Alarm::sound (519) Alarm is 88 seconds
early/late -
Martyn;647005 Wrote:
> No battery.
>
> Not sure about the fridge idea - sounds like a recipe for condensation!
Seems like it's more broken than my Touch. I'm out of ideas, other than
a replacement. Sorry.
--
pallfreeman
Let's not forget that the Catholic Church's most fundamental objection
pallfreeman;646976 Wrote:
> Do you have the battery in the Radio? Try removing it.
>
> If it's really cold, I usually don't get the WSOD. So I was going to
> suggest putting your Radio in the fridge for an hour or two before
> trying to power it on, but since you're in Canada it's probably not
Attached are this AMs logs from both the radio and the server. I did a
factory reset on the Radio so that I could start fresh and when I did
it upgraded to 7.6 The first alarm was the fallback again and as
usual the second alarm worked just fine. Also the first alarm failed
totally on Wed m
Have just been back in contact with Logitech Europe and the response
this time was much better. The support person I spoke to said the Touch
needs a warranty replacement so I've just forwarded all the details and
wait in hope :)
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Radio
1 x
Martyn;646970 Wrote:
> Thanks for your thoughts. I've tried the factory reset several times,
> waiting it out in case something was going on in the background, and
> leaving it off for days (weeks, even) before trying again.
>
Do you have the battery in the Radio? Try removing it.
If it's rea
Thanks for your thoughts. I've tried the factory reset several times,
waiting it out in case something was going on in the background, and
leaving it off for days (weeks, even) before trying again.
I haven't contacted Logitech yet, because I'm in Canada and bought all
my Squeezeboxes from Solutio
bobertuk;646902 Wrote:
> I always have the same problem with 'White screen' after a new firmware
> install. I leave it on the white screen and wait for the applets to
> install. Then I pull the power plug and leave it off for 10 minutes,
> power back on all works OK.
>
Hmm, interesting. I don'
pallfreeman;646857 Wrote:
> I have a similar problem with a Touch. If it's ever restarted (e.g.
> after installing an update) there a 50% chance it'll "white screen" on
> me. Everything works except the display. If I leave it powered off for
> 24 hours, it comes back perfectly fine. You might giv
I have a similar problem with a Touch. If it's ever restarted (e.g.
after installing an update) there a 50% chance it'll "white screen" on
me. Everything works except the display. If I leave it powered off for
24 hours, it comes back perfectly fine. You might give that a go.
They told me to send
MeSue;646767 Wrote:
> (...) Please vote! You'll also get notifications on the bug progress if
> you vote.
Done!
But I seem to have the "switch on issue" also without having synced any
SB devices...
--
TheRooster2000
*-Transporter + Touch + Radio + Controller // QNAP TS-509 Pro + SSOTS
4.12 BE
It might be worth to try if a factory reset solves it, you can trigger a
factory reset by holding + button down when starting the Radio.
If that doesn't help, I'd contact Logitech support.
--
erland
Erland Isaksson ('My homepage' (http://erland.isaksson.info))
(Developer of 'many plugins/appl
18 matches
Mail list logo
