Tim,
I had an eventful ACL blowout, reconstruction and rehabilitation into which
cycling fit very well. Probably too well under the circumstances, but the
net result was the reintroduction of cycling as an enjoyable activity.
Andy Cheatham
Pittsburgh
On Tuesday, September 27, 2016 at 2:17:43 P
Update with what's still available:
On Tuesday, September 27, 2016 at 4:11:59 PM UTC-5, Julian Westerhout wrote:
>
> For Sale: All prices are shipped w/in CONUS
>
>
> 1) MUSA black/grey chambray shirt, size XXL in excellent condition. $45
>
> 2) Ibex black zip front sweater merino wool. Like new
Hi all,
I was curious about the effect on drag of turning my dynamo headlight on or
off.
So I flipped my bicycle over, spun the wheel, and compared "light on" to
"light off." The answer, unremarkably, is that the dynamo does cause some
drag. Maybe more than I expected.
But I'm curious - can
my understanding is that when you spin wheel you will notice drag, but it
doesn't generate as much power as your legs. So when you are actually
riding at high speeds the drag is less noticeable. I could be wrong. i've
got dyno hubs on all my bikes and haven't felt noticeable drag, but then
agai
Too bad it's not one size smaller. I'd be silly and buy another frame. n+1
On Tuesday, September 27, 2016 at 1:19:47 AM UTC-4, Paul S wrote:
>
> That's me - bought the frame from a list member a few months ago but
> couldn't quite reconcile with the sizing. I was planning to post it here
> and o
To the question posed in the original post:
The drag will be the same. Unplugged or Off, the load on the hub is the same.
It's an open circuit.
The thing I don't know is what the drag would be if you shorted the hub
terminals together
--
You received this message because you are subscribed
I would check with Peter White, but my guess is that shorting the terminals on
hub would be very, very bad for the hub.
I ride with dyno hubs on several bikes. With modern hubs and LED lights, the
drag is negligible. Turning the lights off reduces the drag even more, but I
like to have them on
Andy,
Thanks for the report of success. When the doc mentioned a stationary bike
for motion without a load, I thought it had promise also. Once I get past
surgery and into rehab, I'll let the PT determine when I'm ready for it.
But, by then, I will probably have a new smart trainer set up in my t
See this thread and what was said
https://groups.google.com/forum/m/#!searchin/rbw-owners-bunch/Drag/rbw-owners-bunch/XtLm5IU2xpE
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from i
Tony, for Friday (10/14), it looks like I'll have most flexibility in the
afternoon (perhaps lunch onward). There are grandson activities in the
morning. A catch-up would be delightful.
Since I sold the Hilsen to help fund the project bike, it was either the
Rambler or the Quickbeam. Because
What's left with some updated pricing (all prices include shipping in
ConUS):
Sturmey Archer S3X 3speed Hub (36h) with 18t Freewheel, Stem Thumb Shifter,
and Housing. Just add new cable. Good condition, works well. Indicator
chain is a bit rusty…still works fine, but you can replace for five
Hub and Chainring have been sold...
On Wednesday, September 28, 2016 at 1:40:54 PM UTC-4, Eric Karnes wrote:
>
> What's left with some updated pricing (all prices include shipping in
> ConUS):
>
> Sturmey Archer S3X 3speed Hub (36h) with 18t Freewheel, Stem Thumb
> Shifter, and Housing. Just add
Actually, shorting the terminals will do no damage at all, at least not to
any Schmidt hub. And I doubt it would damage any other dynamo hub. It's
nothing to worry about.
Also, the drag the OP noticed with the bike upside-down is real, but the
effect is exaggerated if there's little or no mass bei
What about some of the forks they sell at SOMA? They have a variety of fork
styles in both 1" and 1 1/8". Here is an example:
http://store.somafab.com/soclcucyfo.html
John
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe f
Sent PM on Berthoud 2
On Monday, September 26, 2016 at 6:20:18 PM UTC-6, johnb wrote:
>
> Saddle 2
> Grey Trunk Sack still available.
>
> john
>
>
>
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop re
Ahh thanks! Super helpful illustrations.
On Wednesday, September 28, 2016 at 3:08:14 PM UTC-4, Peter White wrote:
>
> Actually, shorting the terminals will do no damage at all, at least not to
> any Schmidt hub. And I doubt it would damage any other dynamo hub. It's
> nothing to worry about.
>
>
Alright. Thumbies are sold!
If you're interested in the cockpit, let me know.
On Tuesday, September 27, 2016 at 10:50:21 PM UTC-5, Mike K. wrote:
>
>
> Evening all,
> I have a Nitto Albatross cockpit I bought on the list in July/August that
> needs to be relocated. I rode them for a bit, but dec
Thanks, All, you are too kind. It's fun for me to type out my thoughts for the
like-minded to read. I have zero real-life biking friends, so you all are
indispensable!
Yesterday was near disaster for the Bicycle Bus. My oldest bus kid is in 8th
grade and they don't come any sweeter. She was br
Blast for the past but I'm somewhat interested in a simpleone or a quickbeam if
anyone has one in 54
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-own
Ahhh, great story!
René
On Thursday, September 29, 2016, LeahFoy wrote:
> Thanks, All, you are too kind. It's fun for me to type out my thoughts for
> the like-minded to read. I have zero real-life biking friends, so you all
> are indispensable!
>
> Yesterday was near disaster for the Bicycle B
Well, are you in Moscow? If not, more words and pictures are expected!
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegro
Yeah, jet lagged and working a lot! ;-)
On Thursday, September 29, 2016, LeahFoy wrote:
> Well, are you in Moscow? If not, more words and pictures are expected!
>
> --
> You received this message because you are subscribed to the Google Groups
> "RBW Owners Bunch" group.
> To unsubscribe from th
@Steve:
https://youtu.be/oEUm3VzF_Z0
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, se
23 matches
Mail list logo