[RBW] Re: What Can Rivendell Make That's Not Custom?

So far it’s looking like this Orange Sam Hillborne 51” frame Tektro Side-pulls Albatross bars with Shimano thumbies and MTB levers Nitto M12 front rack w/ small green trunk sack and Busch and Miller Dynamo hub front wheel MKS Silver Pedals Brown Brooks B17 Saddle Hammered Silver Fenders Front

[RBW] Re: 650b clearance on Rambouillet?

This is an interesting dissenting opinion Art! I hope to avoid too much trouble with brakes, as I'm already running Tektro r556s with seemingly all of the clearance in the world, but I am afraid I'll hear your bit about Mother Superior's advice echoing in my ears if/when this project goes

[RBW] Re: What Can Rivendell Make That's Not Custom?

Nathan, the same. a 51 but with canti posts, ala the ones that were in the garage sale frames. i'm afraid it'll be a while until i can have it but i'd love to know how you plan on building yours up? On Monday, February 24, 2020 at 10:19:04 PM UTC-5, Nathan Mattia wrote: > > Hello Michael, >

[RBW] Re: What Can Rivendell Make That's Not Custom?

Hello Michael, What size Sam are you ordering? I’m 5’ 9” with a PBH of 80 and just got an orange 51 Caliper to build up. On Monday, February 24, 2020 at 10:19:11 AM UTC-6, Michael Baquerizo wrote: > > Hey Bill, > > Thanks for the reply. > > I actually made this post close to a month ago but

[RBW] FS: 650B Nobilette Protovelo & Bruce Gordon Custom Road

That protovelo is so great. Really happy it’s too big for me. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: FS: 650B Nobilette Protovelo & Bruce Gordon Custom Road

What is the max width tire the Bruce Gordon will accept? Thanks, Corwin On Monday, February 24, 2020 at 11:22:32 AM UTC-8, S. Greco wrote: > > I'm finally gearing up to order a Riv Custom. I've been thinking about it > for about a decade. > > I'll be selling off some special bikes in the next

[RBW] Re: FS- Dura Ace fixed-free wheelset

130mm, standard road size On Monday, February 24, 2020 at 7:16:23 PM UTC-7, Joe Bernard wrote: > > Rear spacing? -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an

[RBW] 650b clearance on Rambouillet?

Greetings Wyatt I will echo comments above. With DiaCompe 750s I easily fit 584x42s on my green Ramb. The chainstays are the biggest limitation: there was 3 mm clearance on each side. My wheels were true and over 3 years I had no problems, although it was a source of worry. All of this

[RBW] Re: 650b clearance on Rambouillet?

All of these pictures seem to be terrible news for my bank account and great news for this ridiculous two-wheelset project. Those clearances look tight but I think I'm going to have to try it. Have had this bike in close to the same set up since I bought it back in 2005. Looking forward to

[RBW] FS: Nitto Dream bars

46 cm $30 plus shipping from Tuscon, unless you're in Tucson, then they're $30. Steve -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] FS- Dura Ace fixed-free wheelset

Rear spacing? -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit

[RBW] Re: Act of Thoughtfulness

Nice work. My guess is a commuter who uses this daily decided to take matters into their own hands. I know a bike advocacy guy who does similar. He carries yellow & white spray cans, & sprays warnings (like the green) and uses the white of improve lane marking. He's even pretty good at

Re: [RBW] 56 Sam Hillborne

I've been prowling around in the weeds (emails) on this thing hoping the sell wouldn't go through for the past couple of weeks. Whoever is the pending purchaser really lucked out with a patient salesperson. On Monday, 24 February 2020 10:21:35 UTC-8, Hayden wrote: > > Sale is pending I can keep

[RBW] Re: Walking boots -- not entirely unrelated to cycling

This is really well stated. The hipster lumbersexual comment is lame and the attacks on the price of Redwing Heritage boots shows a pretty funny lack of self-awareness, considering this is a Rivendell forum. They're made in the USA and high quality, good for all-day wearing in most-non-hiking

Re: [RBW] Re: Walking boots -- not entirely unrelated to cycling

I remember a piece in Backpacker one year where they asked 10 Appalachian Trail through hikers who had worn the same shoes the whole time what they had worn. The only shoe that had more than one was Redwing work boots! I wouldn't choose mine for that task, but I have had mine for 20+ years and

[RBW] Just Because Pics

Thanks Chris. That's my good friend Luis' Homer Hilsen in the pic. He loves that bike. Paul in Dallas -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Act of Thoughtfulness

About once I month I cycle about 10 miles each way up north of me to help an elderly friend. On a particularly busy stretch of roadwith a 40mph speed limit (but most do at least 50)the few cyclists that pass that way get upon the sidewalk for about a quarter of a mile to avoid risking life and

[RBW] Re: 650b clearance on Rambouillet?

Here are some pics of my 68cm Ram wearing 584x47 Byways: https://www.instagram.com/p/Bu-oMfegnvb/?utm_source=ig_web_button_share_sheet KJ On Monday, February 24, 2020 at 3:21:41 AM UTC-8, Wyatt wrote: > > I've seen a few 650b Rambouillet conversions on here over the years, but I > can't quite

[RBW] Re: FS: 650B Nobilette Protovelo & Bruce Gordon Custom Road

A few additional details : I also have a Nitto Campee 32F mini front rack that fits the Protovelo if anyone would prefer a smaller front rack option. The Bruce Gordon also has a painted to match Campagnolo frame pump, I just completely forgot to mount it before taking photos. -- You received

[RBW] Walking boots -- not entirely unrelated to cycling

I thought Redwing was a Minnesota Company. Perhaps that's what was meant rather than Michigan.  Just looked it up. Redwing's site says it started in Redwing, Minnesota and shows their mailing address there. Interesting video of one factory there in Redwing ,Minnesota. 

[RBW] Re: WTB: Brooks C15 or C17

Saddle acquired! On Monday, February 24, 2020 at 8:21:59 AM UTC-8, Neil Doran wrote: > > Anybody have a lightly used C15 or C17? Tried one ages ago, and want to > try it again for a new MTB build. > > Color not critical, but brown would be nice! > -- You received this message because you are

[RBW] Re: Walking boots -- not entirely unrelated to cycling

Figured I'd chime in being a boot wearer. Despite the aforementioned "hipster lumbersexual" connotations, I think you can get one hell of a good boot from them that is honestly still a fair deal. Yes they have "boutique" and limited run models that command silly prices (wait...is this the

Re: [RBW] Yay! My Sweater arrived today.

Agreed. I've been living in it. On Mon, Feb 24, 2020 at 9:42 AM Tim D wrote: > It's very nice. > Definitely worth the wait. > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails

[RBW] Re: WTB/WTT Albatross Bars

Got the bars... many thanks. D On Monday, February 24, 2020 at 9:42:54 AM UTC-5, David Baldi wrote: > > Hi all, > > Any one have Albas kicking around? Cromo or HT Alu. > > Thanks! > David > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch"

[RBW] FSoT: Gus Boots Willsen size L blue (still on preorder).

hi all, as title states, anybody want my place in the preorder queue for a production GBW in blue & size L? alternately, i'd trade this for one of the new appaloosas in blue size 57. text me free won cero nien sixh free sixh nien fiev nin thanks adam -- You received this message because

[RBW] Re: FS: 650B Nobilette Protovelo & Bruce Gordon Custom Road

saddle height of the Bruce Gordon as photo'd is 78 , standover as photo'd with Compass 28s is 87 I am located in Providence, Rhode Island. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving

[RBW] FS: 650B Nobilette Protovelo & Bruce Gordon Custom Road

What is the saddle height in the photos of the Bruce Gordon? Where in the country are these bikes located? Are they in California? Bill Lindsay El Cerrito Ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this

[RBW] Re: FS: 650B Nobilette Protovelo & Bruce Gordon Custom Road

More photos available at these Google Drive Links: Rivendell Protovelo Photos Bruce Gordon Photos -- You received this

[RBW] Re: 650b clearance on Rambouillet?

my friend has a 650b rambo (62cm) with compass/RH SBH 42mm wide tires AND fenders. On Monday, February 24, 2020 at 3:21:41 AM UTC-8, Wyatt wrote: > > I've seen a few 650b Rambouillet conversions on here over the years, but I > can't quite remember the largest tire I've seen cleared by the

[RBW] Re: 650b clearance on Rambouillet?

Hi Wyatt, I've got a 62cm Orange Rambouillet mocked up with Compass Switch Back Hill EL tires. The tightest location is at the chainstays with about 3mm clearance each side. I can provide photos if you would like. The wide 650b tires are possible but the frame is lacking clearance for any

Re: [RBW] 56 Sam Hillborne

Sale is pending I can keep you up dated if it doesn’t come through. -H > On Feb 20, 2020, at 5:01 PM, Scott Wolfe wrote: > > did it sell? > > On Tuesday, February 11, 2020 at 6:57:44 AM UTC-8, Hayden wrote: > Sale is pending > > On Saturday, February 1, 2020 at 10:20:42 AM UTC-8, Hayden

[RBW] Re: WTB/WTT Albatross Bars

Pm sent -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit

Re: [RBW] Chain rubbing rear tire on Clem.

Thanks, all. I'll leave it alone for now...never noticed it while riding, only while looking at it on the stand. Jim On Monday, February 24, 2020 at 11:59:07 AM UTC-5, Eric Norris wrote: > > Jim: > > I wouldn’t worry about this. The chain isn’t going to wear down the tire, > but the tire

Re: [RBW] Re: Walking boots -- not entirely unrelated to cycling

Laing, Dunham has always made 2-6E shoes and boots. They are available from themselves and retailers that specialize in footwear like shoes.com . https://www.rockport.com/dunham/extended-sizes-x-wides-4e https://www.shoes.com/size-10-extra-wide-mens-athletic.htm On Monday, February 24,

[RBW] Re: 650b clearance on Rambouillet?

Following with interest, as I’ve thought of doing the same on my Ram. This recent photo would suggest it is indeed possible: https://www.instagram.com/p/B89GYbSlVxe/?igshid=10xp9jnzm2p44 Reid in Austin -- You received this message because you are subscribed to the Google Groups "RBW Owners

[RBW] Walking boots -- not entirely unrelated to cycling

Shoes? Did someone say shoes? I am a wee bit of an expert in beautiful not-made-in-China boots. In addition to Redwing, check out Wolverine. Also a Michigan company (duh) making beautiful boots in the USA. I have one pair of Redwing work boots purchased on eBay, and two pairs of Wolverine 1000

Re: [RBW] Chain rubbing rear tire on Clem.

Jim: I wouldn’t worry about this. The chain isn’t going to wear down the tire, but the tire might deposit a little dirt on the chain. I have one or two bikes which have a very minor rubbing issue in one ring/cog combo that I use probably less than 1% of the time. I just live with it. --Eric N

[RBW] Re: Chain rubbing rear tire on Clem.

My Velocity hubs have a little 2mm spacer that goes on the freehub before the cassette is slid on. It is required for “8, 9 and 10 speed cassettes.” If your hub also requires a spacer and somebody changed the cassette and left off the spacer, that wouldn’t help your problem. -- You received

[RBW] Re: Chain rubbing rear tire on Clem.

The long chainstays on the Clem mean that the chain is closer to the tire in lowest gear than it would be on an equivalent bike with shorter chainstays. My wife briefly owned one of the first gen 52cm Clem demo bikes that had 2.3" Schwalbe Super Moto tires and it had this issue. The chain

[RBW] Re: WTB/WTT Albatross Bars

I do, but they're 31.8, which is almost surely not what you want. On Monday, February 24, 2020 at 7:42:54 AM UTC-7, David Baldi wrote: > > Hi all, > > Any one have Albas kicking around? Cromo or HT Alu. > > Thanks! > David > -- You received this message because you are subscribed to the

[RBW] WTB: Brooks C15 or C17

Anybody have a lightly used C15 or C17? Tried one ages ago, and want to try it again for a new MTB build. Color not critical, but brown would be nice! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop

[RBW] Re: What Can Rivendell Make That's Not Custom?

Hey Bill, Thanks for the reply. I actually made this post close to a month ago but because I'm new it took a bit to come through the woodwork. I've since done what I probably should have done in the first place and went right to the source. I've a PBH of around 80 or so, and spoke with Vince

[RBW] FS: Vintage Baggins panniers w/ Arkel mounts

BUMP -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit

[RBW] Re: What Can Rivendell Make That's Not Custom?

Yes, if you wanted to buy a previous production model, for which they have the design, they could get that built for you. It's not entirely clear to me whether you would be buying something built by Waterford or by a small framebuilder like Mark Nobilette. Let's say you wanted the old

Re: [RBW] Re: Walking boots -- not entirely unrelated to cycling

> > Does anyone know of any hiking - walking boots in width (size 9 to 10 > depending)? I spent a couple of hours in the downtown Seattle REI a few > years ago when I was working out there, looking for boots and came away > empty handed (empty-footed?) There is also a chain of stores for

[RBW] Re: FS:Handsome Cycles Cromoly She Devil 55cm Anthracite Mixte New Tange headset Sugino BB Riv like

Nice looking bike. Looks quick and comfy. On Monday, February 24, 2020 at 9:27:14 AM UTC-5, Chris L wrote: > > The Handsome Devil was my first bike that was built up from a frameset. > Here it is with 40mm Schwalbe Dureme tires on Velocity Dyad rims. > > [image: Handsome Devil 40mm

[RBW] Yay! My Sweater arrived today.

It's very nice. Definitely worth the wait. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this

[RBW] FS: Rivendell Nigel Smythe Country Bag

Hi y'all, Saddle bag for sale! In pretty good cosmetic and structural shape. Bought it with it missing a closure strap, was always able to sort out making it work. 636 cu. in./10.4 L Was thinking $70 shipped Pictures here Best, Paul in Oakland

[RBW] WTB/WTT Albatross Bars

Hi all, Any one have Albas kicking around? Cromo or HT Alu. Thanks! David -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] What Can Rivendell Make That's Not Custom?

Hi All, New here, not so new to Rivendell. I currently have a Bob Jackson Audax frame that I built up as close to a rivendell as it possibly can be, but the allure of Riv still escapes me. Tires can only go so big, can no longer fit fenders, etc. I don't think i'm a huge fan of the new

[RBW] Custom, not a custom

I'm really looking forward to what comes out of this. I am looking to buy a US-made frame, built up and complete, in the next year or so. With most builders, it seems a complete comes out around 5000, maybe only in stock dimensions, which feels out of reach. (Not to mention so few options for

[RBW] Re: FS: 56 Sam Hillborne

did it sell? On Tuesday, February 11, 2020 at 6:57:44 AM UTC-8, Hayden wrote: > > Sale is pending > > On Saturday, February 1, 2020 at 10:20:42 AM UTC-8, Hayden wrote: >> >> Hey all, >> >> Selling my Hillborne, located in Los Angeles. Bike is in good condition >> one minor ding on top tube from

[RBW] Re: Bags for Sale

Hi Andy, is the Carradice still available? Mine just got nabbed off my bike so I'm in the market for just that bag! My email is mandystrenz gmail com if you need it. On Friday, February 7, 2020 at 1:58:05 PM UTC-5, Andy L wrote: > > Hi all, > I've tried a few different ways of carrying stuff

[RBW] Re: In your opinion, what's missing from the Riv lineup?

I want to chime in here with my 100% agreement. My CLEM is a wonderful workhorse and even does well when pressed into AZT service. I'm going to keep this bike as long as I can. My wife has one. My stepfather rides one. I'm endlessly on the hunt for a used 45cm L-Type for a close friend, though

[RBW] Re: WTB / Looking For: Roadish 650b wheelset with 130mm rear spacing

PM sent! On Friday, February 21, 2020 at 6:39:31 AM UTC-6, j.schwartz wrote: > > I'm building up an old Lygie frame for my wife that has been in our family > for about 15 years. I recently had some bridges repaired and repainted by > Bilenky. > I'm planning to build it up with sensible, not

[RBW] Bags for Sale

Hey I'm sorry if this is going through multiple times but I can't tell if it's posting or not! If it's still available, I'll take the Carradice. My email is mandystrenz gmail com - let me know. :) -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch"

[RBW] FS: well-loved, 63cm A. Homer Hilsen FFH (and bars if you'd like)

Interested -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit

[RBW] Chain rubbing rear tire on Clem.

Hi-- I have noticed on my Clem that the chain rubs the rear tire slightly when the bike is in lowest gear (small ring in front, big cog in back). It's a 59cm Clem H, which I bought complete, so the bottom bracket, etc are as installed by Riv. The tire is a 2" Kenda Kwick Nine and the

Re: [RBW] Re: Walking boots -- not entirely unrelated to cycling

+1 on the Merrell Moab's. I have a pair that I really like. They have synthetic uppers but are very light, comfortable and have decent grip when hiking. Robert Tilley San Diego, CA Sent from my BlackBerry - the most secure mobile device   Original Message   From: jwlou...@gmail.com Sent:

[RBW] Re: Walking boots -- not entirely unrelated to cycling

i'd second (or third?) most things from danner. I have spent a good amount of time on my feet - both standing around for prolonged periods of time and walking around a bunch, and not many shoes can handle that for me. danner light 2 as well as a model called patrol. both are structurally the

[RBW] FS: 58 Sam Hillborne double top tube

What is the current stand over height? -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this

[RBW] Re: Walking boots -- not entirely unrelated to cycling

Redwing is a venerable company. Forty-odd years ago I owned a succession of compact and lineman work boots and they were fantastically comfortable and long-lasting. I stayed with them as my daily work shoe for the better part of a decade before pivoting to running shoes for work (I'm a

[RBW] WTB: Ergon PC2 Pedals

Does anyone have a pair of Ergon PC2 pedals for sale at a price that I wouldn't have to sell a kidney to pay for? Thanks, Matt (in MD) -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving

[RBW] Re: WTB / Looking For: Roadish 650b wheelset with 130mm rear spacing

Pacenti makes a nice wheelset called the Brevet - silver 650B rims with silver high flange hubs, 130 rear spacing, 11 speed Shimano compatible - $400 from Pacenti. Laing On Friday, February 21, 2020 at 7:39:31 AM UTC-5, j.schwartz wrote: > I'm building up an old Lygie frame for my wife that

[RBW] Re: FS:Handsome Cycles Cromoly She Devil 55cm Anthracite Mixte New Tange headset Sugino BB Riv like

I found that 700x38 is the sweet spot for tires on the road and flat trail. I had that size on my Saluki years back. That is one of the reasons I bought the She Devil for the 38 size tire. The tires I used.Schwalbe Marathon wire bead 700x38. Very fast,stable and cut resistant tires. On

[RBW] Re: FS:Handsome Cycles Cromoly She Devil 55cm Anthracite Mixte New Tange headset Sugino BB Riv like

I've been commuting on my Handsome Devil for about 6 years now. It's a great bike that's pretty much like a Canti Sam H. that's all tig welded. Really tough powder coating, can take a 700x38 tire with fenders, and favors a front load. I've looked at the She Devil as there are not many canti/V

[RBW] Re: 650b clearance on Rambouillet?

Love the metallic sage color of that old Redwood, David. Honestly, everything about the simplicity of that comfy cork grip setup is pushing me try out a 1x flatbar revision of my Ram at some point. The proportions on your frame look identical to mine (if there is a difference aside from paint

[RBW] 650b clearance on Rambouillet?

My understanding is that one run of the Ram had more clearance. My Redwood, no frills Ram made as Romulus/Redwood fits 47mm 650b tires. https://www.instagram.com/p/B710F-BFJwP/?igshid=1w4rdy2q7lm3s -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch"

[RBW] 650b clearance on Rambouillet?

The spec is a max tire size of 700 x 37 (without fender). So going to 650B will increase that, but I don't know by how much. Another point of possible interest is the rear dropouts are spaced at 132.5 so you can use a 130 road or a 135 mountain hub easily. tailwinds Bruce -- You received

[RBW] 650b clearance on Rambouillet?

I've seen a few 650b Rambouillet conversions on here over the years, but I can't quite remember the largest tire I've seen cleared by the frame. Has anyone tried 650x47? I like the idea of making it my two-wheelset, do-almost-anything frame, but I'd like to make sure there could be a