[RBW] Re: Show Me Your Roadeo!

does pbh still provide the best guidance for sizing a roadeo? two posters in this thread think they should have gone a size up. my pbh is ~87cm. i have a MIT 58 CM AHH. That bike is perfectly sized for swept back bars but I found it to be a tad too long when i used drop bars. for my pbh, in

[RBW] Re: FS: Arabesque FD/RD/Levers, Downtube Shifters, small bits

Still available are these items 600 derailleur and shift levers, MF-2 hub area rack and Problem Solver center pull/canti cable hanger. I'm looking for a Shimano 170 XT FC-730 silver crank, or FC-6206, or a Sugino crank of similar aesthetics. Partial trade accepted for MF-2 rack. Mike SLO CA

Re: [RBW] Bikes on eBay, CraigsLIst, and Other Sites

The Denver Cheviot belongs to a friend of mine. it is a 60. She only rode it a few times. Says it was too big for her. Beautiful bike. On Tuesday, September 28, 2021 at 1:59:56 PM UTC-6 Paul Choi wrote: > Great price for the Cheviot. Looks like a 55 to me. Wish I was local for > this one. >

Re: [RBW] Re: Clicking MKS bear trap pedal

...could also be the crank, and/or crank/bb interface. Told ya it could be spooky/fun! Paul Brodek Hillsdale, NJ USA On Wed, Sep 29, 2021 at 7:11 PM Eric Marth wrote: > Well, people. I swapped the pedals for a spare set of Lambda Grip Kings > and I had the same click. Right pedal, dull click

Re: [RBW] Share More Riv Riding Pics

Paul, I'm not sure if you are referring to my photo or not, but if so, it's Lake Hefner, which is a lake with a 10 mile long multi-use path around it, right in the middle of Oklahoma City. On Tuesday, September 28, 2021 at 5:40:15 PM UTC-5 Paul Richardson wrote: > i wish this board

[RBW] WTB: WI Eno Eccentric Rear Hub 135 OLD

Looking for a White Industries Eccentric hub in a 135 OLD. I'd also be up for a wheel or complete set in 700c. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email

[RBW] Re: WTB: 58cm Appaloosa

Bump! I'm still searching for a 58cm Appaloosa, with the double-top tubes. Please let me know if you have or find one for sale! On Jun 28, 2021, at 3:40 PM, Matthew Williams wrote: > Bumping this again! I'm still looking for a 58cm Appaloosa, with the double > top tubes. > > Please let me

[RBW] Re: Clicking MKS bear trap pedal

Put a tug on the crank and chainring bolts. On Wednesday, September 29, 2021 at 4:11:37 PM UTC-7 eric...@gmail.com wrote: > Well, people. I swapped the pedals for a spare set of Lambda Grip Kings > and I had the same click. Right pedal, dull click at three o'clock. More > noticeable at

[RBW] Re: FS: 59 Clem H Grilver

Wow! Who's gonna scoop this sweet ride? On Wednesday, September 29, 2021 at 1:58:42 PM UTC-4 Bones wrote: > A few more pics: > [image: Clem03.jpg][image: Clem04.jpg][image: Clem05.jpg] > > On Wednesday, September 29, 2021 at 1:57:53 PM UTC-4 Bones wrote: > >> As promised, here it is. I really

[RBW] Re: Sam Hillborne build video

Thanks all of you for making time to watch! David: Seems we have some overlap in our parts, tires and frame appreciation! Rob Gassie (frame painter) was able to set that BB free. On Wednesday, September 29, 2021 at 5:32:19 PM UTC-4 steve wrote: > Eric, > Great video. I very much enjoyed

[RBW] Re: Clicking MKS bear trap pedal

Well, people. I swapped the pedals for a spare set of Lambda Grip Kings and I had the same click. Right pedal, dull click at three o'clock. More noticeable at lower speeds, seems to disappear if I'm pedaling real hard. On Wednesday, September 29, 2021 at 3:09:37 PM UTC-4 E. Ricky Creek wrote:

[RBW] Re: Sam Hillborne build video

Eric, Great video. I very much enjoyed watching. Great looking Sam. Steve Tuggle On Wednesday, September 29, 2021 at 4:46:57 PM UTC-4 cycli...@gmail.com wrote: > Great video. Great color choice on the repaint (yay black and cream). > Glad the old BB finally was able to be extracted. Love

[RBW] Re: Sam Hillborne build video

Great video. Great color choice on the repaint (yay black and cream). Glad the old BB finally was able to be extracted. Love the RH Snoqualmie Pass tires. I run them on both my Sam Hillborne and Surly Disc Trucker. Welcome to the Riv family. On Wednesday, September 29, 2021 at 1:05:20 PM

[RBW] Re: Sam Hillborne build video

Eric Fantastic build video. Well done and very entertaining! Gunner On Wednesday, September 29, 2021 at 3:01:05 PM UTC-4 eric...@gmail.com wrote: > Thanks to a tip from forum members Liz S. and Paul R. I purchased my first > Rivendell earlier this summer. It was a complete Sam Hillborne

[RBW] Re: Clicking MKS bear trap pedal

This is bad/lazy advice, but when my MKS touring pedals start clicking (these are the only pedals I use), I take the dust cap off and and just jam a bunch of grease in there. It always makes the click go away. I eventually overhaul them correctly, but who wants to do that instead of riding.

[RBW] Re: Clicking MKS bear trap pedal

I think the endcap is removable and the bearings are simple cup & cone with loose ball bearings that should be servicable. Either 1/8" or 5/32" balls. On Wednesday, September 29, 2021 at 7:44:10 AM UTC-7 eric...@gmail.com wrote: > Thanks Paul, can you recommend a good quality can-o-worms

[RBW] Re: FS: Various things , small parts, couple old stems, vtg 600 mini group

Price Drops and adjustments : shipping included to lower 48 · * Paul Comp* - *Thumbie mounts* > > - > Pair - For Shimano - *31.8 clamp size* > > · practically new, only used for about a month. There is a

[RBW] Re: Clicking MKS bear trap pedal

Thanks Paul, can you recommend a good quality can-o-worms opener? Preferably made in USA? On Wednesday, September 29, 2021 at 8:32:43 AM UTC-4 Paul Brodek wrote: > TL; DR: First swap the pedal to make sure the issue is the pedal. If the > clicking goes away, then you know it's the pedal. If

Re: [RBW] Share More Riv Riding Pics

Well...it is a Rivendell, and it is on the road. Marty - somewhere in Southern Pennsylvania [image: PXL_20210927_195400550 (1).jpeg] On Tuesday, September 28, 2021 at 7:18:11 PM UTC-4 Bill Lindsay wrote: > the text says "the garden state" which is New Jersey. > > Bill Lindsay > El Cerrito,

[RBW] Re: Clicking MKS bear trap pedal

TL; DR: First swap the pedal to make sure the issue is the pedal. If the clicking goes away, then you know it's the pedal. If not, you need a deep dive into other possibilities. If it is the pedal, make sure the pedal threads are greased or have anti-seize, install a pedal washer if you don't

[RBW] Clicking MKS bear trap pedal

I just installed a pair of MKS bear trap pedals and have put about 150 miles on them. The right pedal just started clicking. I can feel a dull click when the pedal gets to the three o'clock position. Any ideas for remedies? Thanks! -- You received this message because you are subscribed