On Sep 19, 7:36 pm, Liesl wrote:
> Looking for a non-studded 35-40mm 650B tire with tread that will work
> a) in snow, and b) on a Saluki/Hilson/Foy/Sam. Any suggestions?
Before I rode studded tires, I've had good luck with 35-37mm Paselas
on my 700c bikes. So, I'd guess the B-Lines would be s
On Aug 21, 12:11 pm, Patrick in VT wrote:
> On Aug 20, 12:41 pm, Michael Farrell wrote:
>
> > Any suggestions on tires (specifically 650b) for next weekend's d2r2?
> > Thanks, Mike
>
> any would be fine. i've run Hetres, Pari-Motos and Parigi Roubaix
> (700x28) at D2R2. all were great on that c
On Jul 26, 11:10 am, Montclair BobbyB
wrote:
> I feel your pain, Larry... I had fit problems with my ZAC 19s, and
> struggled to find reasonably-priced, good 650B wheels... it was a big
> hassle (going back 2-3 years) and I finally gave up. And I'm still not
> entirely convinced I'd build any whee
e fender. The metal washer
doesn't provide a water tight seal, and therefore allows water/sweat
to drain.
Peter White has an example photo on his website:
http://peterwhitecycles.com/images/products/Accessories/bertffcb.jpg
John McMurry
Burlington, VT
--
You received this message because yo
is preferable?
For a thick, leather mudflap such as the VO; I think you'll be better
off mounting it on the outside of the fender. The thick, leather
ridge would accumulate debris and would also lessen tire/fender
clearance when mounted inside the fender.
John McMurry
Burlington, VT
--
Yo
tire/fender combo, though when the Q/R is opened for wheel removal,
the fender will interfere with the caliper arm opening fully and so
getting an inflated tire out will no longer be an option. Most
centerpull brakes alleviate that issue.
http://www.flickr.com/photos/thingsofdotnature/4537857
hat the future of 650b
is uncertain due to his recent observations. That you can't find a 40-
hole, 650b rim is an entirely different point.
John McMurry
Burlington, VT
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to
get pretty
> thin.
Sure, Riv, Grand Bois, VO, Schwalbe, Pacenti, Panaracer, and
Continental could all simultaneously shift priorities, but that
doesn't change the demand. I'd bet somebody would seize that
opportunity.
John McMurry
Burlington, VT
--
You received this message because
at it must have exponential sales numbers from year to
year. While my economics classes are far, far behind me; I just don’t
see that as a necessity.
> I'd encourage 650B bike owners and aficionados to
> stockpile an extra set of rims and a couple sets of favorite tires,
> just in cas
esthetics, ...) should help you decide which compromise to choose.
John McMurry
Burlington, VT
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...@googlegroups.com.
To unsubs
able. Is there an alternative
> part I should think about.
Go to your LBS and ask for a cable adjuster bolt (not split) with nut.
Clamp in vise, file off an edge, and slip it in the caliper. Voila!
John McMurry
Burlington, VT
--
You received this message because you are subscribed to the Google
ve taken off the small sprocket on a 9-speed Sram, filled the void
with spacers and it has worked beautifully.
Dura Ace downtube shifts between 8-speed XTR and 8-of-9 Sram are very
crisp.
John McMurry
Burlington, VT
--
You received this message because you are subscribed to the Google Groups &qu
th work OK if you friction shift.
If not, you'd need to fabricate an in-line adjuster for the Cyclone to
get it to work.
Not sure about the Crane.
John McMurry
Burlington, VT
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
ing test
fit, but required a few mm's of drive-side spacers for clearance.
John McMurry
Burlington, VT
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...@googlegroups.com.
To
and
# of chainrings, and
and the shape of the chainstays.
One size does not fit all.
John McMurry
Burlington, VT
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...@googlegroups.com.
On Dec 10, 4:16 am, Cycletex wrote:
> Cool!
>
> BTW - What spindle length are you looking for and are you going by the
> Sheldon Brown suggestions for the AT?
On the Saluki/AHH; an offset 122.5mm spindle works well for a 2-ring
Sugino AT, 127mm for a triple.
John McMurry
Burlington,
t 5mm less of the exact
same tubing per fork end; which makes it less adaptable, should you
decide to switch back to larger tires.
http://search.bikelist.org/getmsg.asp?Filename=saluki.10502.0058.eml
I'd strip it down, build a relatively light wheelset and use great
tires if I wanted a dedicat
t Velocity Synergy rims perfectly, at least
on the pairs I own.
Sounds like you had an off-spec pair or maybe I got incredibly lucky.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups "RBW
ome of the outfits I've been caught wearing too:
http://tinyurl.com/ycls729
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group,
On Sep 29, 10:57 am, Tim McNamara wrote:
> On Sep 29, 2009, at 9:19 AM, John McMurry wrote:
>
> > On Sep 29, 9:46 am, Bruce wrote:
> >> Weight is more a mental thing than a real physical factor for the
> >> recreational/touring rider.
>
> > I disagree
measurable, physical factor.
I'm not suggesting gram shaving a commuter at the expense of
durability. But if you're carrying around unnecessary extra pounds;
they generally won't add to the enjoyment of riding a bicycle unless
your ride is all downhill.
J
.
Near Detroit by chance?
http://detroit.craigslist.org/okl/bik/1312451846.html
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send ema
holder, that worked well for me.
It may still be too short for Atlantis clearance, but worth a shot.
Otherwise, it seems like that mcmaster part should work well.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subsc
ably repair your fender using a similar approach. Just
be sure to drill a small hole at each end of the crack before doing
so.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups "RBW
Owners
ed to set the record straight and acknowledge my previous
error.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send email to rbw-ow
uld integrate some lateral triangulation in their
racks; they'd be stronger, lighter, and better looking than other
racks on the market. Until then, they've got the looks.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are
real quick, and are a PITA to clean on
coffee mugs; including the one referenced above.
But if you do really need your coffee to be boiling hot for hours and
want to carry it on your bicycle and have easy access to drink from
it, on the go; that particular Nissan thermos would be hard
ghtly more elegant. Thx.
I use my butt as a saddle cover when I ride in the rain.
Works pretty well for me, as my B-17s have quite a few very wet miles
on them.
Obenauf's every 6 months or so helps too, I think.
YMMV
John McMurry
Burlington, VT
--~--~-~--~~~--
tires in about 5,000 miles and
I ride them very hard. One was due to under-inflation on a recently-
graded, gravel road on a 35mph descent. The other was a roofing
nail. Neither were the tire's fault.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You recei
front of the rack stuck right up
> through the bottom of the Hoss.
I appears that's not an issue on Sackville bags:
http://www.rivbike.com/images/products/full/0000/2652/20-133c.jpg
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message b
t;
from here:
http://search.bikelist.org/getmsg.asp?Filename=touring.10709.0545.eml
Makes sense to me.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to
them excellent tires on most winter
rides. They're better than the Mount & Grounds when roads have been
plowed, they're worse when AOT is on strike.
Regarding winter bicycle riding, the best advice I can give if you're
having problems getting going is to: keep pedaling.
Momen
h this false alarm, my
sincere apologies.
It's pretty clear that Velocity will continue to make 650b rims for
now.
It's also pretty clear that my sources of information need to be
improved.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You recei
ontinued'.
Apparently, I was given bad information.
Sorry to pass it along.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this
For future wheel building projects, don't count on a secure source for the
650b 32-hole, Synergy, non-O/C rim.
Been there; done that. Velocity is discontinuing them.
FYI
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because yo
e very
simple adjustments to keep it shifting nice.
There are a few tradeoffs too, as Jim T. pointed out.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
T
n
the NE, that's considered a jeep road, not really a trail.
Something like this is what I was talking about:
http://picasaweb.google.com/johnmcmurry/Singletrack#5291582034456142610
So, when I recommend taking fenders off a bike that sees more trail
than road, these are the types of trails I&#
Saluki on as many jeep trails that my
friends and I can find here in Vermont. But, if I mostly rode my
Saluki on technical, singletrack trails, I'd remove the fenders,
provided I had another nice bike with fenders on it.
John McMurry
Burlington, VT
--~--~-~--~~
ur bars are.
That said, I find conveniences to both setups.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send email to rbw-owners
per than a
custom fork, if the purpose is to get the bars low.
Though, if that's the purpose, I bet there's a better bar for your
ride.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google
On Dec 23, 6:50 pm, "PATRICK MOORE" wrote:
> On Tue, Dec 23, 2008 at 2:04 PM, John McMurry wrote:
>
> > How's your quill stem look when you pull it out every year for
> > greasing?
>
> > [snippo]
>
> > And if you don't pull it out every ye
el steer tube is less likely to break or bend than an 1"
aluminum rod with a hole drilled through it.
Quill stems aren't a perfect solution, but they're good enough for me.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message
e happy to trade.
offlist, of course.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send email to rbw-owners-bunch@googlegroups.com
n easily mount both fenders and
rack on just one set of eyelets.
A run of different dropouts perhaps?
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To p
-style crown bolt is the only way to
> seat a fender without using the bracket.
Or a threaded plate attached to the underside of the steer tube/fork
crown.
http://jitensha.com/eng/frame_allrnforkdetl.html
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You receiv
#x27;t for Cliff St. I face every morning, I'd
raise the gearing quite a bit on that bike.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To po
SIS cable housing would spin the barrel out of adjustment.
John McMurry
Burlington, VT
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send email to rbw
thread asked if the rake was added
by bending the blades over a mandrel, using the steertube as a lever.
Though, the actual procedure was never disclosed.
http://sports.groups.yahoo.com/group/KOG/message/19749
It was also a retrofitted 1" steertube in a shimmed headtube
commute, that my Superflash batteries need a re-charge and so was
glad to have this light as a backup.
I also think it looks a lot nicer than the other fender taillamps
currently on the market.
Here's a picture:
http://www.flickr.com/photos/thingsofdotnature/2389403243/
John McMurry
Bur
es a long way.
I'm not sure I understand. A little care towards what? I surely
don't aim for objects in the road.
My point wasn't to discourage use of fenders nor to insinuate that one
kind was safer than the other.
John McMurry
Burlington, VT
--~--~-~--~~-
50 matches
Mail list logo
