Wow...I can just feel the endo. Ouch, oh...
I've ridden Mavic Reflex and Open Pros for years before going with a
Riv and Rich built wheels. Despite the annoying tic sound that can
occur at times due to the joining piece at the seam, the wheels
performed flawlessly. Alloy all the way.
I didn't
To be clear, I wasn't advocating Mavic's postion, but felt that their
response should be noted.
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups RBW
Owners Bunch group.
To post to this group, send email to
One way of looking at this: regardless of the fault (frame, tire,
wheel, rider) the severity of the failure (almost guaranteed crash)
will keep me well clear of carbon spokes.
I've got nothing against Mavic, I have their aluminum rims on three of
my Rivendells.
Angus
On Jun 17, 1:47 am, Big
+1
Rich build all the wheels my wife and I use. If you want the spend
the money and light enough, he can build you something as light as
most light wheels out there but with 32 spokes.
On Jun 16, 8:22 pm, Will wpm...@gmail.com wrote:
Hi. After reading the following VeloNews article, I
There are other carbon-fiber spoked wheels out there that have been
performing well for years. This particular Mavic rim is just a bad design
and prone to failures. But then again, so are the Ksyriums for that matter,
which are metal rims with metal spokes. I've seen enough of them taco'ed to
Carbon spokes... what a terrible idea. Sorry, but no weight savings
is worth the risk, not at any level of riding, IMHO.
Karl
On Jun 16, 8:22 pm, Will wpm...@gmail.com wrote:
Hi. After reading the following VeloNews article, I suddenly feel
thankful for Grant/RBW’s wheel-building
http://velonews.com/article/93240/mavic-responds-to-wheel-collapse-article
This is the wheel manufacturer's response... worth reading. Maybe
carbon spokes weren't to blame...but a carbon frame was.
--~--~-~--~~~---~--~~
You received this message because you are
I don't know about the frame being at fault. I can almost see a flat
tire rolling off of the rim, being trapped between the rim and the
fork (causing the marks shown inside the fork in the original
article), and locking the wheel up. That could cause a fall, and
could explain the sheared off
On Jun 16, 2009, at 11:01 PM, Big Paulie wrote:
http://velonews.com/article/93240/mavic-responds-to-wheel-collapse-
article
This is the wheel manufacturer's response... worth reading. Maybe
carbon spokes weren't to blame...but a carbon frame was.
Even were that the case- and I doubt it
