AASHTA:
http://sheldonbrown.com/bbtaper.html
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/rbw-owners-bunch/-/oNNcfGXTdhUJ.
To post to this group, send email to rbw-
me to some further reading?
Thanks-
Norman in Portland, OR
From: Joe Bernard
To: rbw-owners-bunch@googlegroups.com
Sent: Thursday, October 20, 2011 8:31 AM
Subject: Re: [RBW] TA Zephyr triple and bb length
No daylight between ring and chainstay eventually me
No daylight between ring and chainstay eventually means a nice gouge in your
frame. I seem to recall 125mm being spec'd for this application..you need
that 125 Phil.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To view this discussion
I've run inners as close as 2 mm to the stay with no problems -- IIRC,
Sheldon permits as little -- but would not want personally to go
closer. IIRC, too, someone on the Boblist was selling a 125 mm Phil
with rings for $85 shipped.
I put a spare 113 Phil on the trike when I swapped out the SunTour
I have a Zephyr triple, and I can't remember for sure, but think that might
be the BB length. My middle ring is 36T, so clearance isn't a problem. I
tried plain rings and couldn't get it to shift at all, so went back to TA
ramped/pinned rings and it's perfect.
FWIW I bought from wiggle.co.uk whic
Hello-
Are you running a TA Zephyr triple on your Riv? What brand of bb and length are
you using?
I have a match-built AR with a Phil 123+3 and the teeth on the 42 middle ring
are so close to the stay I can barely see light in the gap. Wondering if I
should go longer, live with it or go to a s
